X86 platform drivers
 help / color / mirror / Atom feed
From: Mario Limonciello <mario.limonciello@amd.com>
To: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>,
	hdegoede@redhat.com, markgross@kernel.org,
	ilpo.jarvinen@linux.intel.com, basavaraj.natikar@amd.com,
	jikos@kernel.org, benjamin.tissoires@redhat.com
Cc: Patil.Reddy@amd.com, platform-driver-x86@vger.kernel.org,
	linux-input@vger.kernel.org
Subject: Re: [PATCH v6 06/15] platform/x86/amd/pmf: Add support to get inputs from other subsystems
Date: Mon, 4 Dec 2023 13:03:49 -0600	[thread overview]
Message-ID: <666fba72-b9bc-452e-948a-76e146f14997@amd.com> (raw)
In-Reply-To: <20231204101548.1458499-7-Shyam-sundar.S-k@amd.com>

On 12/4/2023 04:15, Shyam Sundar S K wrote:
> PMF driver sends changing inputs from each subystem to TA for evaluating
> the conditions in the policy binary.
> 
> Add initial support of plumbing in the PMF driver for Smart PC to get
> information from other subsystems in the kernel.
> 
> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
> ---
>   drivers/platform/x86/amd/pmf/Makefile |   2 +-
>   drivers/platform/x86/amd/pmf/pmf.h    |  18 ++++
>   drivers/platform/x86/amd/pmf/spc.c    | 122 ++++++++++++++++++++++++++
>   drivers/platform/x86/amd/pmf/tee-if.c |   3 +
>   4 files changed, 144 insertions(+), 1 deletion(-)
>   create mode 100644 drivers/platform/x86/amd/pmf/spc.c
> 
> diff --git a/drivers/platform/x86/amd/pmf/Makefile b/drivers/platform/x86/amd/pmf/Makefile
> index d2746ee7369f..6b26e48ce8ad 100644
> --- a/drivers/platform/x86/amd/pmf/Makefile
> +++ b/drivers/platform/x86/amd/pmf/Makefile
> @@ -7,4 +7,4 @@
>   obj-$(CONFIG_AMD_PMF) += amd-pmf.o
>   amd-pmf-objs := core.o acpi.o sps.o \
>   		auto-mode.o cnqf.o \
> -		tee-if.o
> +		tee-if.o spc.o
> diff --git a/drivers/platform/x86/amd/pmf/pmf.h b/drivers/platform/x86/amd/pmf/pmf.h
> index 092be501d4d3..a4a73b845c09 100644
> --- a/drivers/platform/x86/amd/pmf/pmf.h
> +++ b/drivers/platform/x86/amd/pmf/pmf.h
> @@ -150,6 +150,21 @@ struct smu_pmf_metrics {
>   	u16 infra_gfx_maxfreq; /* in MHz */
>   	u16 skin_temp; /* in centi-Celsius */
>   	u16 device_state;
> +	u16 curtemp; /* in centi-Celsius */
> +	u16 filter_alpha_value;
> +	u16 avg_gfx_clkfrequency;
> +	u16 avg_fclk_frequency;
> +	u16 avg_gfx_activity;
> +	u16 avg_socclk_frequency;
> +	u16 avg_vclk_frequency;
> +	u16 avg_vcn_activity;
> +	u16 avg_dram_reads;
> +	u16 avg_dram_writes;
> +	u16 avg_socket_power;
> +	u16 avg_core_power[2];
> +	u16 avg_core_c0residency[16];
> +	u16 spare1;
> +	u32 metrics_counter;
>   } __packed;
>   
>   enum amd_stt_skin_temp {
> @@ -601,4 +616,7 @@ extern const struct attribute_group cnqf_feature_attribute_group;
>   int amd_pmf_init_smart_pc(struct amd_pmf_dev *dev);
>   void amd_pmf_deinit_smart_pc(struct amd_pmf_dev *dev);
>   int apmf_check_smart_pc(struct amd_pmf_dev *pmf_dev);
> +
> +/* Smart PC - TA interfaces */
> +void amd_pmf_populate_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in);
>   #endif /* PMF_H */
> diff --git a/drivers/platform/x86/amd/pmf/spc.c b/drivers/platform/x86/amd/pmf/spc.c
> new file mode 100644
> index 000000000000..351efcbe83c4
> --- /dev/null
> +++ b/drivers/platform/x86/amd/pmf/spc.c
> @@ -0,0 +1,122 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * AMD Platform Management Framework Driver - Smart PC Capabilities
> + *
> + * Copyright (c) 2023, Advanced Micro Devices, Inc.
> + * All Rights Reserved.
> + *
> + * Authors: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
> + *          Patil Rajesh Reddy <Patil.Reddy@amd.com>
> + */
> +
> +#include <acpi/button.h>
> +#include <linux/power_supply.h>
> +#include <linux/units.h>
> +#include "pmf.h"
> +
> +static void amd_pmf_get_smu_info(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in)
> +{
> +	u16 max, avg = 0;
> +	int i;
> +
> +	memset(dev->buf, 0, sizeof(dev->m_table));
> +	amd_pmf_send_cmd(dev, SET_TRANSFER_TABLE, 0, 7, NULL);
> +	memcpy(&dev->m_table, dev->buf, sizeof(dev->m_table));
> +
> +	in->ev_info.socket_power = dev->m_table.apu_power + dev->m_table.dgpu_power;
> +	in->ev_info.skin_temperature = dev->m_table.skin_temp;
> +
> +	/* Get the avg and max C0 residency of all the cores */
> +	max = dev->m_table.avg_core_c0residency[0];
> +	for (i = 0; i < ARRAY_SIZE(dev->m_table.avg_core_c0residency); i++) {
> +		avg += dev->m_table.avg_core_c0residency[i];
> +		if (dev->m_table.avg_core_c0residency[i] > max)
> +			max = dev->m_table.avg_core_c0residency[i];
> +	}
> +
> +	avg = DIV_ROUND_CLOSEST(avg, ARRAY_SIZE(dev->m_table.avg_core_c0residency));
> +	in->ev_info.avg_c0residency = avg;
> +	in->ev_info.max_c0residency = max;
> +	in->ev_info.gfx_busy = dev->m_table.avg_gfx_activity;
> +}
> +
> +static const char * const pmf_battery_supply_name[] = {
> +	"BATT",
> +	"BAT0",
> +};
> +
> +static int amd_pmf_get_battery_prop(enum power_supply_property prop)
> +{
> +	union power_supply_propval value;
> +	struct power_supply *psy;
> +	int i, ret;
> +
> +	for (i = 0; i < ARRAY_SIZE(pmf_battery_supply_name); i++) {
> +		psy = power_supply_get_by_name(pmf_battery_supply_name[i]);
> +		if (!psy)
> +			continue;
> +
> +		ret = power_supply_get_property(psy, prop, &value);
> +		if (ret) {
> +			power_supply_put(psy);
> +			return ret;
> +		}
> +	}
> +
> +	return value.intval;
> +}
> +
> +static int amd_pmf_get_battery_info(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in)
> +{
> +	int val;
> +
> +	val = amd_pmf_get_battery_prop(POWER_SUPPLY_PROP_PRESENT);
> +	if (val < 0)
> +		return val;
> +	if (val != 1)
> +		return -ENODEV;
> +
> +	in->ev_info.bat_percentage = amd_pmf_get_battery_prop(POWER_SUPPLY_PROP_CAPACITY);
> +	/* all values in mWh metrics */
> +	in->ev_info.bat_design = amd_pmf_get_battery_prop(POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN) /
> +		MILLIWATT_PER_WATT;
> +	in->ev_info.full_charge_capacity = amd_pmf_get_battery_prop(POWER_SUPPLY_PROP_ENERGY_FULL) /
> +		MILLIWATT_PER_WATT;
> +	in->ev_info.drain_rate = amd_pmf_get_battery_prop(POWER_SUPPLY_PROP_POWER_NOW) /
> +		MILLIWATT_PER_WATT;
> +
> +	return 0;
> +}
> +
> +static int amd_pmf_get_slider_info(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in)
> +{
> +	int val;
> +
> +	switch (dev->current_profile) {
> +	case PLATFORM_PROFILE_PERFORMANCE:
> +		val = TA_BEST_PERFORMANCE;
> +		break;
> +	case PLATFORM_PROFILE_BALANCED:
> +		val = TA_BETTER_PERFORMANCE;
> +		break;
> +	case PLATFORM_PROFILE_LOW_POWER:
> +		val = TA_BEST_BATTERY;
> +		break;
> +	default:
> +		dev_err(dev->dev, "Unknown Platform Profile.\n");
> +		return -EOPNOTSUPP;
> +	}
> +	in->ev_info.power_slider = val;
> +
> +	return 0;
> +}
> +
> +void amd_pmf_populate_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in)
> +{
> +	/* TA side lid open is 1 and close is 0, hence the ! here */
> +	in->ev_info.lid_state = !acpi_lid_open();
> +	in->ev_info.power_source = amd_pmf_get_power_source();
> +	amd_pmf_get_smu_info(dev, in);
> +	amd_pmf_get_battery_info(dev, in);
> +	amd_pmf_get_slider_info(dev, in);
> +}
> diff --git a/drivers/platform/x86/amd/pmf/tee-if.c b/drivers/platform/x86/amd/pmf/tee-if.c
> index 468f3797a848..e3f17852d532 100644
> --- a/drivers/platform/x86/amd/pmf/tee-if.c
> +++ b/drivers/platform/x86/amd/pmf/tee-if.c
> @@ -113,6 +113,7 @@ static int amd_pmf_invoke_cmd_enact(struct amd_pmf_dev *dev)
>   {
>   	struct ta_pmf_shared_memory *ta_sm = NULL;
>   	struct ta_pmf_enact_result *out = NULL;
> +	struct ta_pmf_enact_table *in = NULL;
>   	struct tee_param param[MAX_TEE_PARAM];
>   	struct tee_ioctl_invoke_arg arg;
>   	int ret = 0;
> @@ -123,11 +124,13 @@ static int amd_pmf_invoke_cmd_enact(struct amd_pmf_dev *dev)
>   	memset(dev->shbuf, 0, dev->policy_sz);
>   	ta_sm = dev->shbuf;
>   	out = &ta_sm->pmf_output.policy_apply_table;
> +	in = &ta_sm->pmf_input.enact_table;
>   
>   	memset(ta_sm, 0, sizeof(*ta_sm));
>   	ta_sm->command_id = TA_PMF_COMMAND_POLICY_BUILDER_ENACT_POLICIES;
>   	ta_sm->if_version = PMF_TA_IF_VERSION_MAJOR;
>   
> +	amd_pmf_populate_ta_inputs(dev, in);
>   	amd_pmf_prepare_args(dev, TA_PMF_COMMAND_POLICY_BUILDER_ENACT_POLICIES, &arg, param);
>   
>   	ret = tee_client_invoke_func(dev->tee_ctx, &arg, param);


  reply	other threads:[~2023-12-04 19:03 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-04 10:15 [PATCH v6 00/15] Introduce PMF Smart PC Solution Builder Feature Shyam Sundar S K
2023-12-04 10:15 ` [PATCH v6 01/15] platform/x86/amd/pmf: Add PMF TEE interface Shyam Sundar S K
2023-12-04 10:15 ` [PATCH v6 02/15] platform/x86/amd/pmf: Add support for PMF-TA interaction Shyam Sundar S K
2023-12-04 10:15 ` [PATCH v6 03/15] platform/x86/amd/pmf: Change return type of amd_pmf_set_dram_addr() Shyam Sundar S K
2023-12-11  8:40   ` Hans de Goede
2023-12-11 15:15     ` Shyam Sundar S K
2023-12-11 15:55       ` Hans de Goede
2023-12-11 16:35         ` Shyam Sundar S K
2023-12-04 10:15 ` [PATCH v6 04/15] platform/x86/amd/pmf: Add support for PMF Policy Binary Shyam Sundar S K
2023-12-04 19:05   ` Mario Limonciello
2023-12-11  8:53   ` Hans de Goede
2023-12-04 10:15 ` [PATCH v6 05/15] platform/x86/amd/pmf: change amd_pmf_init_features() call sequence Shyam Sundar S K
2023-12-04 10:15 ` [PATCH v6 06/15] platform/x86/amd/pmf: Add support to get inputs from other subsystems Shyam Sundar S K
2023-12-04 19:03   ` Mario Limonciello [this message]
2023-12-04 10:15 ` [PATCH v6 07/15] platform/x86/amd/pmf: Add support update p3t limit Shyam Sundar S K
2023-12-04 10:15 ` [PATCH v6 08/15] platform/x86/amd/pmf: Add support to update system state Shyam Sundar S K
2023-12-04 10:15 ` [PATCH v6 09/15] platform/x86/amd/pmf: Make source_as_str() as non-static Shyam Sundar S K
2023-12-04 10:15 ` [PATCH v6 10/15] platform/x86/amd/pmf: Add facility to dump TA inputs Shyam Sundar S K
2023-12-04 10:15 ` [PATCH v6 11/15] platform/x86/amd/pmf: Add capability to sideload of policy binary Shyam Sundar S K
2023-12-11  8:59   ` Hans de Goede
2023-12-04 10:15 ` [PATCH v6 12/15] platform/x86/amd/pmf: dump policy binary data Shyam Sundar S K
2023-12-04 10:15 ` [PATCH v6 13/15] HID: amd_sfh: rename float_to_int() to amd_sfh_float_to_int() Shyam Sundar S K
2023-12-04 19:02   ` Mario Limonciello
2023-12-04 10:15 ` [PATCH v6 14/15] platform/x86/amd/pmf: Add PMF-AMDSFH interface for HPD Shyam Sundar S K
2023-12-04 19:02   ` Mario Limonciello
2023-12-11  9:07   ` Hans de Goede
2023-12-04 10:15 ` [PATCH v6 15/15] platform/x86/amd/pmf: Add PMF-AMDSFH interface for ALS Shyam Sundar S K
2023-12-11  9:15   ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=666fba72-b9bc-452e-948a-76e146f14997@amd.com \
    --to=mario.limonciello@amd.com \
    --cc=Patil.Reddy@amd.com \
    --cc=Shyam-sundar.S-k@amd.com \
    --cc=basavaraj.natikar@amd.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=hdegoede@redhat.com \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=jikos@kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=markgross@kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox