Poky Project Discussions
 help / color / mirror / Atom feed
From: Richard Purdie <richard.purdie@linuxfoundation.org>
To: Gary Thomas <gary@mlbassoc.com>
Cc: Poky <poky@lists.pokylinux.org>
Subject: Re: Using RPM with Poky
Date: Mon, 21 Mar 2011 17:57:49 +0000	[thread overview]
Message-ID: <1300730269.30423.3975.camel@rex> (raw)
In-Reply-To: <4D877E6B.9000007@mlbassoc.com>

On Mon, 2011-03-21 at 10:35 -0600, Gary Thomas wrote:
> On 03/21/2011 09:54 AM, Richard Purdie wrote:
> > On Mon, 2011-03-21 at 09:25 -0600, Gary Thomas wrote:
> >> I'm trying to do some testing with Poky on an atom-PC.  I thought
> >> I'd try with a minimal system and then add pieces I need.  Sadly,
> >> I've run aground doing this.  I've built a couple of images with
> >> varying results:
> >>     poky-image-minimal-live - boots on my box
> >>     poky-image-sato-live - boots, but fails to find X display, then hangs (*)
> >>
> >> There seem to be no RPM tools on the minimal image.  Did I miss something?
> >> On my old, ipk based system, I'd build up a minimal image then use opkg
> >> to install additional packages.
> >
> > Minimal images were never meant to ship with the package manager and now
> > don't. You can obviously change the image definitions easily enough as
> > needed.
> >
> >>    How do I do that with the RPM based images?
> >
> > The same switch turns on/off the package manager data for rpm and opkg.
> 
> I tried adding this to local.conf, but nothing changed when I build minimal image:
>    IMAGE_FEATURES += " package-management ssh-server-dropbear "

There is also this:

# remove not needed ipkg informations
ROOTFS_POSTPROCESS_COMMAND += "remove_packaging_data_files ; "

in poky-image-minimal.bbclass which has been there for a long time and
removes the package manager data files.


> BTW, where is this documented?  Not in the Poky handbook from what I can tell.
> 
> Also, is there documentation on how to use zypper, how to set up repositories, etc?

I think others have helped here. Please do send patches for the manual
when people go to the trouble of finding information to help though!

> >>   I've checked the documentation and there's basically nothing
> >> about this, unless I looked in the wrong place.
> >>
> >> Any ideas or pointers gladly accepted.  Thanks
> >>
> >> (*) I had success with this in the past when I booted with MACHINE=emenlow
> >> but that hardware isn't in the primary list.
> >
> > I'm not sure why this isn't working or what the problem might be...
> 
> It complains it can't find /dev/fb0.  See the boot log at http://www.mlbassoc.com/poky/boot_2011-03-21.log

Does your board have Intel graphics or PVR/SGX? emenlow has PVR/SGX
which might explain this...

Cheers,

Richard




  parent reply	other threads:[~2011-03-21 17:58 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-21 15:25 Using RPM with Poky Gary Thomas
2011-03-21 15:54 ` Richard Purdie
2011-03-21 16:35   ` Gary Thomas
2011-03-21 17:00     ` Mark Hatle
2011-03-21 17:04       ` Gary Thomas
2011-03-21 17:10       ` Paul Eggleton
2011-03-21 17:57     ` Richard Purdie [this message]
2011-03-21 18:17       ` Gary Thomas
2011-03-21 20:47         ` Darren Hart
2011-03-21 20:52           ` Gary Thomas
2011-03-21 18:27       ` Darren Hart
2011-03-21 18:33         ` Gary Thomas
2011-03-21 19:45           ` Darren Hart
2011-03-21 20:20             ` Gary Thomas
2011-03-21 20:25               ` Bruce Ashfield
2011-03-21 21:02                 ` Tom Zanussi
2011-03-21 22:58                   ` Gary Thomas
2011-03-21 23:24                     ` Darren Hart
2011-03-22  0:55                       ` Gary Thomas
2011-03-22  2:49                         ` Darren Hart
2011-03-22 11:20                           ` Gary Thomas
2011-03-22  6:22                         ` Tom Zanussi
2011-03-22 22:58                     ` Tom Rini
2011-03-22 23:30                       ` Gary Thomas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1300730269.30423.3975.camel@rex \
    --to=richard.purdie@linuxfoundation.org \
    --cc=gary@mlbassoc.com \
    --cc=poky@lists.pokylinux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox