From: Darren Hart <dvhart@linux.intel.com>
To: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Poky <poky@lists.pokylinux.org>
Subject: Re: Using RPM with Poky
Date: Mon, 21 Mar 2011 11:27:15 -0700 [thread overview]
Message-ID: <4D879883.5010501@linux.intel.com> (raw)
In-Reply-To: <1300730269.30423.3975.camel@rex>
On 03/21/2011 10:57 AM, Richard Purdie wrote:
> On Mon, 2011-03-21 at 10:35 -0600, Gary Thomas wrote:
>> On 03/21/2011 09:54 AM, Richard Purdie wrote:
>>> On Mon, 2011-03-21 at 09:25 -0600, Gary Thomas wrote:
>>>> I'm trying to do some testing with Poky on an atom-PC. I thought
>>>> I'd try with a minimal system and then add pieces I need. Sadly,
>>>> I've run aground doing this. I've built a couple of images with
>>>> varying results:
>>>> poky-image-minimal-live - boots on my box
>>>> poky-image-sato-live - boots, but fails to find X display, then hangs (*)
>>>>
>>>> There seem to be no RPM tools on the minimal image. Did I miss something?
>>>> On my old, ipk based system, I'd build up a minimal image then use opkg
>>>> to install additional packages.
>>>
>>> Minimal images were never meant to ship with the package manager and now
>>> don't. You can obviously change the image definitions easily enough as
>>> needed.
>>>
>>>> How do I do that with the RPM based images?
>>>
>>> The same switch turns on/off the package manager data for rpm and opkg.
>>
>> I tried adding this to local.conf, but nothing changed when I build minimal image:
>> IMAGE_FEATURES += " package-management ssh-server-dropbear "
>
> There is also this:
>
> # remove not needed ipkg informations
> ROOTFS_POSTPROCESS_COMMAND += "remove_packaging_data_files ; "
>
> in poky-image-minimal.bbclass which has been there for a long time and
> removes the package manager data files.
>
>
>> BTW, where is this documented? Not in the Poky handbook from what I can tell.
>>
>> Also, is there documentation on how to use zypper, how to set up repositories, etc?
>
> I think others have helped here. Please do send patches for the manual
> when people go to the trouble of finding information to help though!
>
>>>> I've checked the documentation and there's basically nothing
>>>> about this, unless I looked in the wrong place.
>>>>
>>>> Any ideas or pointers gladly accepted. Thanks
>>>>
>>>> (*) I had success with this in the past when I booted with MACHINE=emenlow
>>>> but that hardware isn't in the primary list.
>>>
>>> I'm not sure why this isn't working or what the problem might be...
>>
>> It complains it can't find /dev/fb0. See the boot log at http://www.mlbassoc.com/poky/boot_2011-03-21.log
>
> Does your board have Intel graphics or PVR/SGX? emenlow has PVR/SGX
> which might explain this...
And if you need emenlow, that bsp is now part of the meta-intel layer:
http://git.pokylinux.org/cgit.cgi/meta-intel/
Thanks,
Darren
>
> Cheers,
>
> Richard
>
>
> _______________________________________________
> poky mailing list
> poky@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/poky
--
Darren Hart
Intel Open Source Technology Center
Yocto Project - Linux Kernel
next prev parent reply other threads:[~2011-03-21 18:27 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-21 15:25 Using RPM with Poky Gary Thomas
2011-03-21 15:54 ` Richard Purdie
2011-03-21 16:35 ` Gary Thomas
2011-03-21 17:00 ` Mark Hatle
2011-03-21 17:04 ` Gary Thomas
2011-03-21 17:10 ` Paul Eggleton
2011-03-21 17:57 ` Richard Purdie
2011-03-21 18:17 ` Gary Thomas
2011-03-21 20:47 ` Darren Hart
2011-03-21 20:52 ` Gary Thomas
2011-03-21 18:27 ` Darren Hart [this message]
2011-03-21 18:33 ` Gary Thomas
2011-03-21 19:45 ` Darren Hart
2011-03-21 20:20 ` Gary Thomas
2011-03-21 20:25 ` Bruce Ashfield
2011-03-21 21:02 ` Tom Zanussi
2011-03-21 22:58 ` Gary Thomas
2011-03-21 23:24 ` Darren Hart
2011-03-22 0:55 ` Gary Thomas
2011-03-22 2:49 ` Darren Hart
2011-03-22 11:20 ` Gary Thomas
2011-03-22 6:22 ` Tom Zanussi
2011-03-22 22:58 ` Tom Rini
2011-03-22 23:30 ` Gary Thomas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D879883.5010501@linux.intel.com \
--to=dvhart@linux.intel.com \
--cc=poky@lists.pokylinux.org \
--cc=richard.purdie@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox