From: Gary Thomas <gary@mlbassoc.com>
To: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Poky <poky@lists.pokylinux.org>
Subject: Re: Using RPM with Poky
Date: Mon, 21 Mar 2011 10:35:55 -0600 [thread overview]
Message-ID: <4D877E6B.9000007@mlbassoc.com> (raw)
In-Reply-To: <1300722848.30423.3751.camel@rex>
On 03/21/2011 09:54 AM, Richard Purdie wrote:
> On Mon, 2011-03-21 at 09:25 -0600, Gary Thomas wrote:
>> I'm trying to do some testing with Poky on an atom-PC. I thought
>> I'd try with a minimal system and then add pieces I need. Sadly,
>> I've run aground doing this. I've built a couple of images with
>> varying results:
>> poky-image-minimal-live - boots on my box
>> poky-image-sato-live - boots, but fails to find X display, then hangs (*)
>>
>> There seem to be no RPM tools on the minimal image. Did I miss something?
>> On my old, ipk based system, I'd build up a minimal image then use opkg
>> to install additional packages.
>
> Minimal images were never meant to ship with the package manager and now
> don't. You can obviously change the image definitions easily enough as
> needed.
>
>> How do I do that with the RPM based images?
>
> The same switch turns on/off the package manager data for rpm and opkg.
I tried adding this to local.conf, but nothing changed when I build minimal image:
IMAGE_FEATURES += " package-management ssh-server-dropbear "
BTW, where is this documented? Not in the Poky handbook from what I can tell.
Also, is there documentation on how to use zypper, how to set up repositories, etc?
>
>> I've checked the documentation and there's basically nothing
>> about this, unless I looked in the wrong place.
>>
>> Any ideas or pointers gladly accepted. Thanks
>>
>> (*) I had success with this in the past when I booted with MACHINE=emenlow
>> but that hardware isn't in the primary list.
>
> I'm not sure why this isn't working or what the problem might be...
It complains it can't find /dev/fb0. See the boot log at http://www.mlbassoc.com/poky/boot_2011-03-21.log
>
> You didn't mention which branch this is with btw.
master aeaa356a5ee77b4596c479451a9db289381a4d16
Thanks again
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
next prev parent reply other threads:[~2011-03-21 16:35 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-21 15:25 Using RPM with Poky Gary Thomas
2011-03-21 15:54 ` Richard Purdie
2011-03-21 16:35 ` Gary Thomas [this message]
2011-03-21 17:00 ` Mark Hatle
2011-03-21 17:04 ` Gary Thomas
2011-03-21 17:10 ` Paul Eggleton
2011-03-21 17:57 ` Richard Purdie
2011-03-21 18:17 ` Gary Thomas
2011-03-21 20:47 ` Darren Hart
2011-03-21 20:52 ` Gary Thomas
2011-03-21 18:27 ` Darren Hart
2011-03-21 18:33 ` Gary Thomas
2011-03-21 19:45 ` Darren Hart
2011-03-21 20:20 ` Gary Thomas
2011-03-21 20:25 ` Bruce Ashfield
2011-03-21 21:02 ` Tom Zanussi
2011-03-21 22:58 ` Gary Thomas
2011-03-21 23:24 ` Darren Hart
2011-03-22 0:55 ` Gary Thomas
2011-03-22 2:49 ` Darren Hart
2011-03-22 11:20 ` Gary Thomas
2011-03-22 6:22 ` Tom Zanussi
2011-03-22 22:58 ` Tom Rini
2011-03-22 23:30 ` Gary Thomas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D877E6B.9000007@mlbassoc.com \
--to=gary@mlbassoc.com \
--cc=poky@lists.pokylinux.org \
--cc=richard.purdie@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox