From: Amit Pundir <amit.pundir@linaro.org>
To: Greg KH <gregkh@linuxfoundation.org>, Stable <stable@vger.kernel.org>
Cc: Jonas Gorski <jonas.gorski@gmail.com>,
"David S . Miller" <davem@davemloft.net>
Subject: [PATCH for-4.9.y 4/5] bcm63xx_enet: correct clock usage
Date: Tue, 17 Jul 2018 13:49:17 +0530 [thread overview]
Message-ID: <1531815558-20002-5-git-send-email-amit.pundir@linaro.org> (raw)
In-Reply-To: <1531815558-20002-1-git-send-email-amit.pundir@linaro.org>
From: Jonas Gorski <jonas.gorski@gmail.com>
commit 9c86b846ce02f7e35d7234cf090b80553eba5389 upstream.
Check the return code of prepare_enable and change one last instance of
enable only to prepare_enable. Also properly disable and release the
clock in error paths and on remove for enetsw.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
---
Cherry-picked from lede tree https://git.lede-project.org/?p=source.git
drivers/net/ethernet/broadcom/bcm63xx_enet.c | 31 +++++++++++++++++++++-------
1 file changed, 23 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
index 08d91efceed0..3760a2be5dbc 100644
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -1790,7 +1790,9 @@ static int bcm_enet_probe(struct platform_device *pdev)
ret = PTR_ERR(priv->mac_clk);
goto out;
}
- clk_prepare_enable(priv->mac_clk);
+ ret = clk_prepare_enable(priv->mac_clk);
+ if (ret)
+ goto out_put_clk_mac;
/* initialize default and fetch platform data */
priv->rx_ring_size = BCMENET_DEF_RX_DESC;
@@ -1822,9 +1824,11 @@ static int bcm_enet_probe(struct platform_device *pdev)
if (IS_ERR(priv->phy_clk)) {
ret = PTR_ERR(priv->phy_clk);
priv->phy_clk = NULL;
- goto out_put_clk_mac;
+ goto out_disable_clk_mac;
}
- clk_prepare_enable(priv->phy_clk);
+ ret = clk_prepare_enable(priv->phy_clk);
+ if (ret)
+ goto out_put_clk_phy;
}
/* do minimal hardware init to be able to probe mii bus */
@@ -1915,13 +1919,16 @@ static int bcm_enet_probe(struct platform_device *pdev)
out_uninit_hw:
/* turn off mdc clock */
enet_writel(priv, 0, ENET_MIISC_REG);
- if (priv->phy_clk) {
+ if (priv->phy_clk)
clk_disable_unprepare(priv->phy_clk);
+
+out_put_clk_phy:
+ if (priv->phy_clk)
clk_put(priv->phy_clk);
- }
-out_put_clk_mac:
+out_disable_clk_mac:
clk_disable_unprepare(priv->mac_clk);
+out_put_clk_mac:
clk_put(priv->mac_clk);
out:
free_netdev(dev);
@@ -2766,7 +2773,9 @@ static int bcm_enetsw_probe(struct platform_device *pdev)
ret = PTR_ERR(priv->mac_clk);
goto out_unmap;
}
- clk_enable(priv->mac_clk);
+ ret = clk_prepare_enable(priv->mac_clk);
+ if (ret)
+ goto out_put_clk;
priv->rx_chan = 0;
priv->tx_chan = 1;
@@ -2787,7 +2796,7 @@ static int bcm_enetsw_probe(struct platform_device *pdev)
ret = register_netdev(dev);
if (ret)
- goto out_put_clk;
+ goto out_disable_clk;
netif_carrier_off(dev);
platform_set_drvdata(pdev, dev);
@@ -2796,6 +2805,9 @@ static int bcm_enetsw_probe(struct platform_device *pdev)
return 0;
+out_disable_clk:
+ clk_disable_unprepare(priv->mac_clk);
+
out_put_clk:
clk_put(priv->mac_clk);
@@ -2827,6 +2839,9 @@ static int bcm_enetsw_remove(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(res->start, resource_size(res));
+ clk_disable_unprepare(priv->mac_clk);
+ clk_put(priv->mac_clk);
+
free_netdev(dev);
return 0;
}
--
2.7.4
next prev parent reply other threads:[~2018-07-17 8:51 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-17 8:19 [PATCH for-4.9.y 0/5] Stable commits picked up from lede project Amit Pundir
2018-07-17 8:19 ` [PATCH for-4.9.y 1/5] mtd: m25p80: consider max message size in m25p80_read Amit Pundir
2018-07-17 8:19 ` [PATCH for-4.9.y 2/5] spi/bcm63xx: make spi subsystem aware of message size limits Amit Pundir
2018-07-18 10:47 ` Mark Brown
2018-07-18 10:55 ` Greg KH
2018-07-18 11:14 ` Mark Brown
2018-07-17 8:19 ` [PATCH for-4.9.y 3/5] spi/bcm63xx: fix typo in bcm63xx_spi_max_length breaking compilation Amit Pundir
2018-07-17 8:19 ` Amit Pundir [this message]
2018-07-17 8:19 ` [PATCH for-4.9.y 5/5] bcm63xx_enet: do not write to random DMA channel on BCM6345 Amit Pundir
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1531815558-20002-5-git-send-email-amit.pundir@linaro.org \
--to=amit.pundir@linaro.org \
--cc=davem@davemloft.net \
--cc=gregkh@linuxfoundation.org \
--cc=jonas.gorski@gmail.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox