[PATCH AUTOSEL 5.15 01/12] nvme-multipath: find NUMA path only for online numa-node

[PATCH AUTOSEL 5.15 01/12] nvme-multipath: find NUMA path only for online numa-node

[Sasha Levin]

From: Nilay Shroff <nilay@linux.ibm.com>

[ Upstream commit d3a043733f25d743f3aa617c7f82dbcb5ee2211a ]

In current native multipath design when a shared namespace is created,
we loop through each possible numa-node, calculate the NUMA distance of
that node from each nvme controller and then cache the optimal IO path
for future reference while sending IO. The issue with this design is that
we may refer to the NUMA distance table for an offline node which may not
be populated at the time and so we may inadvertently end up finding and
caching a non-optimal path for IO. Then latter when the corresponding
numa-node becomes online and hence the NUMA distance table entry for that
node is created, ideally we should re-calculate the multipath node distance
for the newly added node however that doesn't happen unless we rescan/reset
the controller. So essentially, we may keep using non-optimal IO path for a
node which is made online after namespace is created.
This patch helps fix this issue ensuring that when a shared namespace is
created, we calculate the multipath node distance for each online numa-node
instead of each possible numa-node. Then latter when a node becomes online
and we receive any IO on that newly added node, we would calculate the
multipath node distance for newly added node but this time NUMA distance
table would have been already populated for newly added node. Hence we
would be able to correctly calculate the multipath node distance and choose
the optimal path for the IO.

Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/multipath.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 73eddb67f0d24..9ddaa599a9cd0 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -516,7 +516,7 @@ static void nvme_mpath_set_live(struct nvme_ns *ns)
 		int node, srcu_idx;
 
 		srcu_idx = srcu_read_lock(&head->srcu);
-		for_each_node(node)
+		for_each_online_node(node)
 			__nvme_find_path(head, node);
 		srcu_read_unlock(&head->srcu, srcu_idx);
 	}
-- 
2.43.0

[PATCH AUTOSEL 5.15 02/12] dma-mapping: benchmark: avoid needless copy_to_user if benchmark fails

[Sasha Levin]

From: Fedor Pchelkin <pchelkin@ispras.ru>

[ Upstream commit f7c9ccaadffd13066353332c13d7e9bf73b8f92d ]

If do_map_benchmark() has failed, there is nothing useful to copy back
to userspace.

Suggested-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/dma/map_benchmark.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/kernel/dma/map_benchmark.c b/kernel/dma/map_benchmark.c
index 9b9af1bd6be31..8d6d802576928 100644
--- a/kernel/dma/map_benchmark.c
+++ b/kernel/dma/map_benchmark.c
@@ -275,6 +275,9 @@ static long map_benchmark_ioctl(struct file *file, unsigned int cmd,
 		 * dma_mask changed by benchmark
 		 */
 		dma_set_mask(map->dev, old_dma_mask);
+
+		if (ret)
+			return ret;
 		break;
 	default:
 		return -EINVAL;
-- 
2.43.0

[PATCH AUTOSEL 5.15 03/12] nvme: adjust multiples of NVME_CTRL_PAGE_SIZE in offset

[Sasha Levin]

From: Kundan Kumar <kundan.kumar@samsung.com>

[ Upstream commit 1bd293fcf3af84674e82ed022c049491f3768840 ]

bio_vec start offset may be relatively large particularly when large
folio gets added to the bio. A bigger offset will result in avoiding the
single-segment mapping optimization and end up using expensive
mempool_alloc further.

Rather than using absolute value, adjust bv_offset by
NVME_CTRL_PAGE_SIZE while checking if segment can be fitted into one/two
PRP entries.

Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/pci.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 7bb74112fef37..5a3ba7e390546 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -836,7 +836,8 @@ static blk_status_t nvme_map_data(struct nvme_dev *dev, struct request *req,
 		struct bio_vec bv = req_bvec(req);
 
 		if (!is_pci_p2pdma_page(bv.bv_page)) {
-			if (bv.bv_offset + bv.bv_len <= NVME_CTRL_PAGE_SIZE * 2)
+			if ((bv.bv_offset & (NVME_CTRL_PAGE_SIZE - 1)) +
+			     bv.bv_len <= NVME_CTRL_PAGE_SIZE * 2)
 				return nvme_setup_prp_simple(dev, req,
 							     &cmnd->rw, &bv);
 
-- 
2.43.0

[PATCH AUTOSEL 5.15 04/12] afs: Don't cross .backup mountpoint from backup volume

[Sasha Levin]

From: Marc Dionne <marc.dionne@auristor.com>

[ Upstream commit 29be9100aca2915fab54b5693309bc42956542e5 ]

Don't cross a mountpoint that explicitly specifies a backup volume
(target is <vol>.backup) when starting from a backup volume.

It it not uncommon to mount a volume's backup directly in the volume
itself.  This can cause tools that are not paying attention to get
into a loop mounting the volume onto itself as they attempt to
traverse the tree, leading to a variety of problems.

This doesn't prevent the general case of loops in a sequence of
mountpoints, but addresses a common special case in the same way
as other afs clients.

Reported-by: Jan Henrik Sylvester <jan.henrik.sylvester@uni-hamburg.de>
Link: http://lists.infradead.org/pipermail/linux-afs/2024-May/008454.html
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Link: http://lists.infradead.org/pipermail/linux-afs/2024-February/008074.html
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/768760.1716567475@warthog.procyon.org.uk
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/afs/mntpt.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/fs/afs/mntpt.c b/fs/afs/mntpt.c
index bbb2c210d139d..fa8a6543142d5 100644
--- a/fs/afs/mntpt.c
+++ b/fs/afs/mntpt.c
@@ -146,6 +146,11 @@ static int afs_mntpt_set_params(struct fs_context *fc, struct dentry *mntpt)
 		put_page(page);
 		if (ret < 0)
 			return ret;
+
+		/* Don't cross a backup volume mountpoint from a backup volume */
+		if (src_as->volume && src_as->volume->type == AFSVL_BACKVOL &&
+		    ctx->type == AFSVL_BACKVOL)
+			return -ENODEV;
 	}
 
 	return 0;
-- 
2.43.0

[PATCH AUTOSEL 5.15 05/12] regmap-i2c: Subtract reg size from max_write

[Sasha Levin]

From: Jim Wylder <jwylder@google.com>

[ Upstream commit 611b7eb19d0a305d4de00280e4a71a1b15c507fc ]

Currently, when an adapter defines a max_write_len quirk,
the data will be chunked into data sizes equal to the
max_write_len quirk value.  But the payload will be increased by
the size of the register address before transmission.  The
resulting value always ends up larger than the limit set
by the quirk.

Avoid this error by setting regmap's max_write to the quirk's
max_write_len minus the number of bytes for the register and
padding.  This allows the chunking to work correctly for this
limited case without impacting other use-cases.

Signed-off-by: Jim Wylder <jwylder@google.com>
Link: https://msgid.link/r/20240523211437.2839942-1-jwylder@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/base/regmap/regmap-i2c.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/base/regmap/regmap-i2c.c b/drivers/base/regmap/regmap-i2c.c
index 3ec611dc0c09f..a905e955bbfc7 100644
--- a/drivers/base/regmap/regmap-i2c.c
+++ b/drivers/base/regmap/regmap-i2c.c
@@ -350,7 +350,8 @@ static const struct regmap_bus *regmap_get_i2c_bus(struct i2c_client *i2c,
 
 		if (quirks->max_write_len &&
 		    (bus->max_raw_write == 0 || bus->max_raw_write > quirks->max_write_len))
-			max_write = quirks->max_write_len;
+			max_write = quirks->max_write_len -
+				(config->reg_bits + config->pad_bits) / BITS_PER_BYTE;
 
 		if (max_read || max_write) {
 			ret_bus = kmemdup(bus, sizeof(*bus), GFP_KERNEL);
-- 
2.43.0

[PATCH AUTOSEL 5.15 06/12] platform/x86: touchscreen_dmi: Add support for setting touchscreen properties from cmdline

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 0b178b02673998f5acca5a0365a8858ca45beedb ]

On x86/ACPI platforms touchscreens mostly just work without needing any
device/model specific configuration. But in some cases (mostly with Silead
and Goodix touchscreens) it is still necessary to manually specify various
touchscreen-properties on a per model basis.

touchscreen_dmi is a special place for DMI quirks for this, but it can be
challenging for users to figure out the right property values, especially
for Silead touchscreens where non of these can be read back from
the touchscreen-controller.

ATM users can only test touchscreen properties by editing touchscreen_dmi.c
and then building a completely new kernel which makes it unnecessary
difficult for users to test and submit properties when necessary for their
laptop / tablet model.

Add support for specifying properties on the kernel commandline to allow
users to easily figure out the right settings. See the added documentation
in kernel-parameters.txt for the commandline syntax.

Cc: Gregor Riepl <onitake@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240523143601.47555-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../admin-guide/kernel-parameters.txt         | 22 ++++++
 drivers/platform/x86/touchscreen_dmi.c        | 79 ++++++++++++++++++-
 2 files changed, 98 insertions(+), 3 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index e61f0d038c6d7..569b3d9f2634f 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1702,6 +1702,28 @@
 				Format:
 				<bus_id>,<clkrate>
 
+	i2c_touchscreen_props= [HW,ACPI,X86]
+			Set device-properties for ACPI-enumerated I2C-attached
+			touchscreen, to e.g. fix coordinates of upside-down
+			mounted touchscreens. If you need this option please
+			submit a drivers/platform/x86/touchscreen_dmi.c patch
+			adding a DMI quirk for this.
+
+			Format:
+			<ACPI_HW_ID>:<prop_name>=<val>[:prop_name=val][:...]
+			Where <val> is one of:
+			Omit "=<val>" entirely	Set a boolean device-property
+			Unsigned number		Set a u32 device-property
+			Anything else		Set a string device-property
+
+			Examples (split over multiple lines):
+			i2c_touchscreen_props=GDIX1001:touchscreen-inverted-x:
+			touchscreen-inverted-y
+
+			i2c_touchscreen_props=MSSL1680:touchscreen-size-x=1920:
+			touchscreen-size-y=1080:touchscreen-inverted-y:
+			firmware-name=gsl1680-vendor-model.fw:silead,home-button
+
 	i8042.debug	[HW] Toggle i8042 debug mode
 	i8042.unmask_kbd_data
 			[HW] Enable printing of interrupt data from the KBD port
diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index 161bd19441042..0308c90db8e30 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -9,10 +9,13 @@
  */
 
 #include <linux/acpi.h>
+#include <linux/ctype.h>
 #include <linux/device.h>
 #include <linux/dmi.h>
 #include <linux/efi_embedded_fw.h>
 #include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kstrtox.h>
 #include <linux/notifier.h>
 #include <linux/property.h>
 #include <linux/string.h>
@@ -1746,7 +1749,7 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
 	{ }
 };
 
-static const struct ts_dmi_data *ts_data;
+static struct ts_dmi_data *ts_data;
 
 static void ts_dmi_add_props(struct i2c_client *client)
 {
@@ -1781,6 +1784,64 @@ static int ts_dmi_notifier_call(struct notifier_block *nb,
 	return 0;
 }
 
+#define MAX_CMDLINE_PROPS 16
+
+static struct property_entry ts_cmdline_props[MAX_CMDLINE_PROPS + 1];
+
+static struct ts_dmi_data ts_cmdline_data = {
+	.properties = ts_cmdline_props,
+};
+
+static int __init ts_parse_props(char *str)
+{
+	/* Save the original str to show it on syntax errors */
+	char orig_str[256];
+	char *name, *value;
+	u32 u32val;
+	int i, ret;
+
+	strscpy(orig_str, str, sizeof(orig_str));
+
+	/*
+	 * str is part of the static_command_line from init/main.c and poking
+	 * holes in that by writing 0 to it is allowed, as is taking long
+	 * lasting references to it.
+	 */
+	ts_cmdline_data.acpi_name = strsep(&str, ":");
+
+	for (i = 0; i < MAX_CMDLINE_PROPS; i++) {
+		name = strsep(&str, ":");
+		if (!name || !name[0])
+			break;
+
+		/* Replace '=' with 0 and make value point past '=' or NULL */
+		value = name;
+		strsep(&value, "=");
+		if (!value) {
+			ts_cmdline_props[i] = PROPERTY_ENTRY_BOOL(name);
+		} else if (isdigit(value[0])) {
+			ret = kstrtou32(value, 0, &u32val);
+			if (ret)
+				goto syntax_error;
+
+			ts_cmdline_props[i] = PROPERTY_ENTRY_U32(name, u32val);
+		} else {
+			ts_cmdline_props[i] = PROPERTY_ENTRY_STRING(name, value);
+		}
+	}
+
+	if (!i || str)
+		goto syntax_error;
+
+	ts_data = &ts_cmdline_data;
+	return 1;
+
+syntax_error:
+	pr_err("Invalid '%s' value for 'i2c_touchscreen_props='\n", orig_str);
+	return 1; /* "i2c_touchscreen_props=" is still a known parameter */
+}
+__setup("i2c_touchscreen_props=", ts_parse_props);
+
 static struct notifier_block ts_dmi_notifier = {
 	.notifier_call = ts_dmi_notifier_call,
 };
@@ -1788,13 +1849,25 @@ static struct notifier_block ts_dmi_notifier = {
 static int __init ts_dmi_init(void)
 {
 	const struct dmi_system_id *dmi_id;
+	struct ts_dmi_data *ts_data_dmi;
 	int error;
 
 	dmi_id = dmi_first_match(touchscreen_dmi_table);
-	if (!dmi_id)
+	ts_data_dmi = dmi_id ? dmi_id->driver_data : NULL;
+
+	if (ts_data) {
+		/*
+		 * Kernel cmdline provided data takes precedence, copy over
+		 * DMI efi_embedded_fw info if available.
+		 */
+		if (ts_data_dmi)
+			ts_data->embedded_fw = ts_data_dmi->embedded_fw;
+	} else if (ts_data_dmi) {
+		ts_data = ts_data_dmi;
+	} else {
 		return 0; /* Not an error */
+	}
 
-	ts_data = dmi_id->driver_data;
 	/* Some dmi table entries only provide an efi_embedded_fw_desc */
 	if (!ts_data->properties)
 		return 0;
-- 
2.43.0

[PATCH AUTOSEL 5.15 07/12] platform/x86: touchscreen_dmi: Add info for GlobalSpace SolT IVW 11.6" tablet

[Sasha Levin]

From: hmtheboy154 <buingoc67@gmail.com>

[ Upstream commit 7c8639aa41343fd7b3dbe09baf6b0791fcc407a1 ]

This is a tablet created by GlobalSpace Technologies Limited
which uses an Intel Atom x5-Z8300, 4GB of RAM & 64GB of storage.

Link: https://web.archive.org/web/20171102141952/http://globalspace.in/11.6-device.html
Signed-off-by: hmtheboy154 <buingoc67@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240527091447.248849-2-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/touchscreen_dmi.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index 0308c90db8e30..c59f829d397f2 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -877,6 +877,22 @@ static const struct ts_dmi_data schneider_sct101ctm_data = {
 	.properties	= schneider_sct101ctm_props,
 };
 
+static const struct property_entry globalspace_solt_ivw116_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-min-x", 7),
+	PROPERTY_ENTRY_U32("touchscreen-min-y", 22),
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1723),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1077),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-globalspace-solt-ivw116.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data globalspace_solt_ivw116_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= globalspace_solt_ivw116_props,
+};
+
 static const struct property_entry techbite_arc_11_6_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-min-x", 5),
 	PROPERTY_ENTRY_U32("touchscreen-min-y", 7),
@@ -1572,6 +1588,15 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "SCT101CTM"),
 		},
 	},
+	{
+		/* GlobalSpace SoLT IVW 11.6" */
+		.driver_data = (void *)&globalspace_solt_ivw116_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Globalspace Tech Pvt Ltd"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SolTIVW"),
+			DMI_MATCH(DMI_PRODUCT_SKU, "PN20170413488"),
+		},
+	},
 	{
 		/* Techbite Arc 11.6 */
 		.driver_data = (void *)&techbite_arc_11_6_data,
-- 
2.43.0

[PATCH AUTOSEL 5.15 08/12] platform/x86: touchscreen_dmi: Add info for the EZpad 6s Pro

[Sasha Levin]

From: hmtheboy154 <buingoc67@gmail.com>

[ Upstream commit 3050052613790e75b5e4a8536930426b0a8b0774 ]

The "EZpad 6s Pro" uses the same touchscreen as the "EZpad 6 Pro B",
unlike the "Ezpad 6 Pro" which has its own touchscreen.

Signed-off-by: hmtheboy154 <buingoc67@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240527091447.248849-3-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/platform/x86/touchscreen_dmi.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index c59f829d397f2..4d4eae5a4153b 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -1349,6 +1349,17 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_BIOS_DATE, "04/24/2018"),
 		},
 	},
+	{
+		/* Jumper EZpad 6s Pro */
+		.driver_data = (void *)&jumper_ezpad_6_pro_b_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Jumper"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Ezpad"),
+			/* Above matches are too generic, add bios match */
+			DMI_MATCH(DMI_BIOS_VERSION, "E.WSA116_8.E1.042.bin"),
+			DMI_MATCH(DMI_BIOS_DATE, "01/08/2020"),
+		},
+	},
 	{
 		/* Jumper EZpad 6 m4 */
 		.driver_data = (void *)&jumper_ezpad_6_m4_data,
-- 
2.43.0

[PATCH AUTOSEL 5.15 09/12] nvmet: fix a possible leak when destroy a ctrl during qp establishment

[Sasha Levin]

From: Sagi Grimberg <sagi@grimberg.me>

[ Upstream commit c758b77d4a0a0ed3a1292b3fd7a2aeccd1a169a4 ]

In nvmet_sq_destroy we capture sq->ctrl early and if it is non-NULL we
know that a ctrl was allocated (in the admin connect request handler)
and we need to release pending AERs, clear ctrl->sqs and sq->ctrl
(for nvme-loop primarily), and drop the final reference on the ctrl.

However, a small window is possible where nvmet_sq_destroy starts (as
a result of the client giving up and disconnecting) concurrently with
the nvme admin connect cmd (which may be in an early stage). But *before*
kill_and_confirm of sq->ref (i.e. the admin connect managed to get an sq
live reference). In this case, sq->ctrl was allocated however after it was
captured in a local variable in nvmet_sq_destroy.
This prevented the final reference drop on the ctrl.

Solve this by re-capturing the sq->ctrl after all inflight request has
completed, where for sure sq->ctrl reference is final, and move forward
based on that.

This issue was observed in an environment with many hosts connecting
multiple ctrls simoutanuosly, creating a delay in allocating a ctrl
leading up to this race window.

Reported-by: Alex Turin <alex@vastdata.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/core.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index 2c44d5a95c8d6..ef2e500bccfdf 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -801,6 +801,15 @@ void nvmet_sq_destroy(struct nvmet_sq *sq)
 	wait_for_completion(&sq->free_done);
 	percpu_ref_exit(&sq->ref);
 
+	/*
+	 * we must reference the ctrl again after waiting for inflight IO
+	 * to complete. Because admin connect may have sneaked in after we
+	 * store sq->ctrl locally, but before we killed the percpu_ref. the
+	 * admin connect allocates and assigns sq->ctrl, which now needs a
+	 * final ref put, as this ctrl is going away.
+	 */
+	ctrl = sq->ctrl;
+
 	if (ctrl) {
 		/*
 		 * The teardown flow may take some time, and the host may not
-- 
2.43.0

[PATCH AUTOSEL 5.15 10/12] kbuild: fix short log for AS in link-vmlinux.sh

[Sasha Levin]

From: Masahiro Yamada <masahiroy@kernel.org>

[ Upstream commit 3430f65d6130ccbc86f0ff45642eeb9e2032a600 ]

In convention, short logs print the output file, not the input file.

Let's change the suffix for 'AS' since it assembles *.S into *.o.

[Before]

  LD      .tmp_vmlinux.kallsyms1
  NM      .tmp_vmlinux.kallsyms1.syms
  KSYMS   .tmp_vmlinux.kallsyms1.S
  AS      .tmp_vmlinux.kallsyms1.S
  LD      .tmp_vmlinux.kallsyms2
  NM      .tmp_vmlinux.kallsyms2.syms
  KSYMS   .tmp_vmlinux.kallsyms2.S
  AS      .tmp_vmlinux.kallsyms2.S
  LD      vmlinux

[After]

  LD      .tmp_vmlinux.kallsyms1
  NM      .tmp_vmlinux.kallsyms1.syms
  KSYMS   .tmp_vmlinux.kallsyms1.S
  AS      .tmp_vmlinux.kallsyms1.o
  LD      .tmp_vmlinux.kallsyms2
  NM      .tmp_vmlinux.kallsyms2.syms
  KSYMS   .tmp_vmlinux.kallsyms2.S
  AS      .tmp_vmlinux.kallsyms2.o
  LD      vmlinux

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 scripts/link-vmlinux.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh
index 5a5a0cfad69df..40cbc73c7813c 100755
--- a/scripts/link-vmlinux.sh
+++ b/scripts/link-vmlinux.sh
@@ -278,7 +278,7 @@ kallsyms_step()
 	vmlinux_link ${kallsyms_vmlinux} "${kallsymso_prev}" ${btf_vmlinux_bin_o}
 	kallsyms ${kallsyms_vmlinux} ${kallsyms_S}
 
-	info AS ${kallsyms_S}
+	info AS ${kallsymso}
 	${CC} ${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS} \
 	      ${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL} \
 	      -c -o ${kallsymso} ${kallsyms_S}
-- 
2.43.0

[PATCH AUTOSEL 5.15 11/12] nfc/nci: Add the inconsistency check between the input data length and count

[Sasha Levin]

From: Edward Adam Davis <eadavis@qq.com>

[ Upstream commit 068648aab72c9ba7b0597354ef4d81ffaac7b979 ]

write$nci(r0, &(0x7f0000000740)=ANY=[@ANYBLOB="610501"], 0xf)

Syzbot constructed a write() call with a data length of 3 bytes but a count value
of 15, which passed too little data to meet the basic requirements of the function
nci_rf_intf_activated_ntf_packet().

Therefore, increasing the comparison between data length and count value to avoid
problems caused by inconsistent data length and count.

Reported-and-tested-by: syzbot+71bfed2b2bcea46c98f2@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nfc/virtual_ncidev.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/nfc/virtual_ncidev.c b/drivers/nfc/virtual_ncidev.c
index 6317e8505aaad..09d4ab0e63b1a 100644
--- a/drivers/nfc/virtual_ncidev.c
+++ b/drivers/nfc/virtual_ncidev.c
@@ -121,6 +121,10 @@ static ssize_t virtual_ncidev_write(struct file *file,
 		kfree_skb(skb);
 		return -EFAULT;
 	}
+	if (strnlen(skb->data, count) != count) {
+		kfree_skb(skb);
+		return -EINVAL;
+	}
 
 	nci_recv_frame(ndev, skb);
 	return count;
-- 
2.43.0

[PATCH AUTOSEL 5.15 12/12] null_blk: Do not allow runt zone with zone capacity smaller then zone size

[Sasha Levin]

From: Damien Le Moal <dlemoal@kernel.org>

[ Upstream commit b164316808ec5de391c3e7b0148ec937d32d280d ]

A zoned device with a smaller last zone together with a zone capacity
smaller than the zone size does make any sense as that does not
correspond to any possible setup for a real device:
1) For ZNS and zoned UFS devices, all zones are always the same size.
2) For SMR HDDs, all zones always have the same capacity.
In other words, if we have a smaller last runt zone, then this zone
capacity should always be equal to the zone size.

Add a check in null_init_zoned_dev() to prevent a configuration to have
both a smaller zone size and a zone capacity smaller than the zone size.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240530054035.491497-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/block/null_blk/zoned.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/block/null_blk/zoned.c b/drivers/block/null_blk/zoned.c
index dae54dd1aeac3..e0819b04d288f 100644
--- a/drivers/block/null_blk/zoned.c
+++ b/drivers/block/null_blk/zoned.c
@@ -80,6 +80,17 @@ int null_init_zoned_dev(struct nullb_device *dev, struct request_queue *q)
 		return -EINVAL;
 	}
 
+	/*
+	 * If a smaller zone capacity was requested, do not allow a smaller last
+	 * zone at the same time as such zone configuration does not correspond
+	 * to any real zoned device.
+	 */
+	if (dev->zone_capacity != dev->zone_size &&
+	    dev->size & (dev->zone_size - 1)) {
+		pr_err("A smaller last zone is not allowed with zone capacity smaller than zone size.\n");
+		return -EINVAL;
+	}
+
 	zone_capacity_sects = mb_to_sects(dev->zone_capacity);
 	dev_capacity_sects = mb_to_sects(dev->size);
 	dev->zone_size_sects = mb_to_sects(dev->zone_size);
-- 
2.43.0