[PATCH 24/39] drm/amd/display: Program CURSOR_DST_X_OFFSET in viewport space

[Alex Hung <alex.hung@amd.com>]

From: Alvin Lee <alvin.lee2@amd.com>

[WHAT & HOW]
According to register specifications, the CURSOR_DST_X_OFFSET
is relative to the start of the data viewport, not RECOUT space.
In this case we must transform the cursor coordinates passed to
hubp401_cursor_set_position into viewport space to program this
register. This fixes an underflow issue that occurs in scaled
mode with low refresh rate.

Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
---
 .../gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c b/drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c
index a893160ae775..3f9ca9b40949 100644
--- a/drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c
+++ b/drivers/gpu/drm/amd/display/dc/hubp/dcn401/dcn401_hubp.c
@@ -656,7 +656,9 @@ void hubp401_cursor_set_position(
 	int y_pos = pos->y - param->recout.y;
 	int rec_x_offset = x_pos - pos->x_hotspot;
 	int rec_y_offset = y_pos - pos->y_hotspot;
-	uint32_t dst_x_offset;
+	int dst_x_offset;
+	int x_pos_viewport = x_pos * param->viewport.width / param->recout.width;
+	int x_hot_viewport = pos->x_hotspot * param->viewport.width / param->recout.width;
 	uint32_t cur_en = pos->enable ? 1 : 0;
 
 	hubp->curs_pos = *pos;
@@ -668,7 +670,13 @@ void hubp401_cursor_set_position(
 	if (hubp->curs_attr.address.quad_part == 0)
 		return;
 
-	dst_x_offset = (rec_x_offset >= 0) ? rec_x_offset : 0;
+	/* Translate the x position of the cursor from rect
+	 * space into viewport space. CURSOR_DST_X_OFFSET
+	 * is the offset relative to viewport start position.
+	 */
+	dst_x_offset = x_pos_viewport - x_hot_viewport *
+			(1 + hubp->curs_attr.attribute_flags.bits.ENABLE_MAGNIFICATION);
+	dst_x_offset = (dst_x_offset >= 0) ? dst_x_offset : 0;
 	dst_x_offset *= param->ref_clk_khz;
 	dst_x_offset /= param->pixel_clk_khz;
 
-- 
2.34.1