FAILED: patch "[PATCH] PCI: imx6: Configure REF_USE_PAD before PHY reset for i.MX95" failed to apply to 6.18-stable tree

FAILED: patch "[PATCH] PCI: imx6: Configure REF_USE_PAD before PHY reset for i.MX95" failed to apply to 6.18-stable tree

[gregkh]

The patch below does not apply to the 6.18-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.18.y
git checkout FETCH_HEAD
git cherry-pick -x 0c26b1c34d12d4debfb5363cc0be6cdf68e87ba2
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '2026071331-exit-kinfolk-e3f9@gregkh' --subject-prefix 'PATCH 6.18.y' 'HEAD^..'

Possible dependencies:



thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 0c26b1c34d12d4debfb5363cc0be6cdf68e87ba2 Mon Sep 17 00:00:00 2001
From: Richard Zhu <hongxing.zhu@nxp.com>
Date: Mon, 18 May 2026 15:27:14 +0800
Subject: [PATCH] PCI: imx6: Configure REF_USE_PAD before PHY reset for i.MX95

According to the i.MX95 PCIe PHY Databook, the ref_use_pad signal in the
Common Block Signals section selects the reference clock source connected
to the PHY pads. Per the specification, any change to this input must be
followed by a PHY reset assertion to take effect.

Move the REF_USE_PAD configuration before the PHY reset toggle to comply
with the required initialization sequence.

Fixes: 47f54a902dcd ("PCI: imx6: Toggle the core reset for i.MX95 PCIe")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: renamed the callback and helper to match the usecase]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260518072715.3166514-2-hongxing.zhu@nxp.com

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 773ab65b2afa..b32748816ac8 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -138,6 +138,7 @@ struct imx_pcie_drvdata {
 	const u32 mode_off[IMX_PCIE_MAX_INSTANCES];
 	const u32 mode_mask[IMX_PCIE_MAX_INSTANCES];
 	const struct pci_epc_features *epc_features;
+	int (*select_ref_clk_src)(struct imx_pcie *pcie);
 	int (*init_phy)(struct imx_pcie *pcie);
 	int (*enable_ref_clk)(struct imx_pcie *pcie, bool enable);
 	int (*core_reset)(struct imx_pcie *pcie, bool assert);
@@ -249,6 +250,24 @@ static unsigned int imx_pcie_grp_offset(const struct imx_pcie *imx_pcie)
 	return imx_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
 }
 
+static int imx95_pcie_select_ref_clk_src(struct imx_pcie *imx_pcie)
+{
+	bool ext = imx_pcie->enable_ext_refclk;
+
+	/*
+	 * Regarding the Signal Descriptions of i.MX95 PCIe PHY, ref_use_pad is
+	 * used to select reference clock connected to a pair of pads.
+	 *
+	 * Any change in this input must be followed by phy_reset assertion.
+	 */
+
+	regmap_update_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_PHY_GEN_CTRL,
+			   IMX95_PCIE_REF_USE_PAD,
+			   ext ? IMX95_PCIE_REF_USE_PAD : 0);
+
+	return 0;
+}
+
 static int imx95_pcie_init_phy(struct imx_pcie *imx_pcie)
 {
 	bool ext = imx_pcie->enable_ext_refclk;
@@ -271,9 +290,6 @@ static int imx95_pcie_init_phy(struct imx_pcie *imx_pcie)
 			IMX95_PCIE_PHY_CR_PARA_SEL,
 			IMX95_PCIE_PHY_CR_PARA_SEL);
 
-	regmap_update_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_PHY_GEN_CTRL,
-			   IMX95_PCIE_REF_USE_PAD,
-			   ext ? IMX95_PCIE_REF_USE_PAD : 0);
 	regmap_update_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_SS_RW_REG_0,
 			   IMX95_PCIE_REF_CLKEN,
 			   ext ? 0 : IMX95_PCIE_REF_CLKEN);
@@ -1351,6 +1367,9 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
 		pp->bridge->disable_device = imx_pcie_disable_device;
 	}
 
+	if (imx_pcie->drvdata->select_ref_clk_src)
+		imx_pcie->drvdata->select_ref_clk_src(imx_pcie);
+
 	imx_pcie_assert_core_reset(imx_pcie);
 
 	if (imx_pcie->drvdata->init_phy)
@@ -2051,6 +2070,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
 		.mode_mask[0] = IMX95_PCIE_DEVICE_TYPE,
 		.core_reset = imx95_pcie_core_reset,
 		.init_phy = imx95_pcie_init_phy,
+		.select_ref_clk_src = imx95_pcie_select_ref_clk_src,
 		.wait_pll_lock = imx95_pcie_wait_for_phy_pll_lock,
 		.enable_ref_clk = imx95_pcie_enable_ref_clk,
 		.clr_clkreq_override = imx95_pcie_clr_clkreq_override,
@@ -2106,6 +2126,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
 		.ltssm_mask = IMX95_PCIE_LTSSM_EN,
 		.mode_off[0]  = IMX95_PE0_GEN_CTRL_1,
 		.mode_mask[0] = IMX95_PCIE_DEVICE_TYPE,
+		.select_ref_clk_src = imx95_pcie_select_ref_clk_src,
 		.init_phy = imx95_pcie_init_phy,
 		.core_reset = imx95_pcie_core_reset,
 		.wait_pll_lock = imx95_pcie_wait_for_phy_pll_lock,

[PATCH 6.18.y 1/2] PCI: imx6: Fix reference clock source selection for i.MX95

[Sasha Levin]

From: Franz Schnyder <franz.schnyder@toradex.com>

[ Upstream commit 88cc4cbe08bba27bb58888d25d336774aa0ccab1 ]

In the PCIe PHY init for the i.MX95, the reference clock source selection
uses a conditional instead of always passing the mask. This currently
breaks functionality if the internal refclk is used.

To fix this issue, always pass IMX95_PCIE_REF_USE_PAD as the mask and clear
bit if external refclk is not used. This essentially swaps the parameters.

Fixes: d8574ce57d76 ("PCI: imx6: Add external reference clock input mode support")
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260325093118.684142-1-fra.schnyder@gmail.com
Stable-dep-of: 0c26b1c34d12 ("PCI: imx6: Configure REF_USE_PAD before PHY reset for i.MX95")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pci-imx6.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 9083658a4287f7..942fa61d13ef3c 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -150,6 +150,7 @@ struct imx_lut_data {
 struct imx_pcie {
 	struct dw_pcie		*pci;
 	struct gpio_desc	*reset_gpiod;
+	bool			enable_ext_refclk;
 	struct clk_bulk_data	*clks;
 	int			num_clks;
 	struct regmap		*iomuxc_gpr;
@@ -244,6 +245,8 @@ static unsigned int imx_pcie_grp_offset(const struct imx_pcie *imx_pcie)
 
 static int imx95_pcie_init_phy(struct imx_pcie *imx_pcie)
 {
+	bool ext = imx_pcie->enable_ext_refclk;
+
 	/*
 	 * ERR051624: The Controller Without Vaux Cannot Exit L23 Ready
 	 * Through Beacon or PERST# De-assertion
@@ -262,13 +265,12 @@ static int imx95_pcie_init_phy(struct imx_pcie *imx_pcie)
 			IMX95_PCIE_PHY_CR_PARA_SEL,
 			IMX95_PCIE_PHY_CR_PARA_SEL);
 
-	regmap_update_bits(imx_pcie->iomuxc_gpr,
-			   IMX95_PCIE_PHY_GEN_CTRL,
-			   IMX95_PCIE_REF_USE_PAD, 0);
-	regmap_update_bits(imx_pcie->iomuxc_gpr,
-			   IMX95_PCIE_SS_RW_REG_0,
+	regmap_update_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_PHY_GEN_CTRL,
+			   IMX95_PCIE_REF_USE_PAD,
+			   ext ? IMX95_PCIE_REF_USE_PAD : 0);
+	regmap_update_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_SS_RW_REG_0,
 			   IMX95_PCIE_REF_CLKEN,
-			   IMX95_PCIE_REF_CLKEN);
+			   ext ? 0 : IMX95_PCIE_REF_CLKEN);
 
 	return 0;
 }
-- 
2.53.0

[PATCH 6.18.y 2/2] PCI: imx6: Configure REF_USE_PAD before PHY reset for i.MX95

[Sasha Levin]

From: Richard Zhu <hongxing.zhu@nxp.com>

[ Upstream commit 0c26b1c34d12d4debfb5363cc0be6cdf68e87ba2 ]

According to the i.MX95 PCIe PHY Databook, the ref_use_pad signal in the
Common Block Signals section selects the reference clock source connected
to the PHY pads. Per the specification, any change to this input must be
followed by a PHY reset assertion to take effect.

Move the REF_USE_PAD configuration before the PHY reset toggle to comply
with the required initialization sequence.

Fixes: 47f54a902dcd ("PCI: imx6: Toggle the core reset for i.MX95 PCIe")
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: renamed the callback and helper to match the usecase]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260518072715.3166514-2-hongxing.zhu@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/pci/controller/dwc/pci-imx6.c | 27 ++++++++++++++++++++++++---
 1 file changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 942fa61d13ef3c..1dbb502157074b 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -135,6 +135,7 @@ struct imx_pcie_drvdata {
 	const u32 mode_off[IMX_PCIE_MAX_INSTANCES];
 	const u32 mode_mask[IMX_PCIE_MAX_INSTANCES];
 	const struct pci_epc_features *epc_features;
+	int (*select_ref_clk_src)(struct imx_pcie *pcie);
 	int (*init_phy)(struct imx_pcie *pcie);
 	int (*enable_ref_clk)(struct imx_pcie *pcie, bool enable);
 	int (*core_reset)(struct imx_pcie *pcie, bool assert);
@@ -243,6 +244,24 @@ static unsigned int imx_pcie_grp_offset(const struct imx_pcie *imx_pcie)
 	return imx_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
 }
 
+static int imx95_pcie_select_ref_clk_src(struct imx_pcie *imx_pcie)
+{
+	bool ext = imx_pcie->enable_ext_refclk;
+
+	/*
+	 * Regarding the Signal Descriptions of i.MX95 PCIe PHY, ref_use_pad is
+	 * used to select reference clock connected to a pair of pads.
+	 *
+	 * Any change in this input must be followed by phy_reset assertion.
+	 */
+
+	regmap_update_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_PHY_GEN_CTRL,
+			   IMX95_PCIE_REF_USE_PAD,
+			   ext ? IMX95_PCIE_REF_USE_PAD : 0);
+
+	return 0;
+}
+
 static int imx95_pcie_init_phy(struct imx_pcie *imx_pcie)
 {
 	bool ext = imx_pcie->enable_ext_refclk;
@@ -265,9 +284,6 @@ static int imx95_pcie_init_phy(struct imx_pcie *imx_pcie)
 			IMX95_PCIE_PHY_CR_PARA_SEL,
 			IMX95_PCIE_PHY_CR_PARA_SEL);
 
-	regmap_update_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_PHY_GEN_CTRL,
-			   IMX95_PCIE_REF_USE_PAD,
-			   ext ? IMX95_PCIE_REF_USE_PAD : 0);
 	regmap_update_bits(imx_pcie->iomuxc_gpr, IMX95_PCIE_SS_RW_REG_0,
 			   IMX95_PCIE_REF_CLKEN,
 			   ext ? 0 : IMX95_PCIE_REF_CLKEN);
@@ -1237,6 +1253,9 @@ static int imx_pcie_host_init(struct dw_pcie_rp *pp)
 		pp->bridge->disable_device = imx_pcie_disable_device;
 	}
 
+	if (imx_pcie->drvdata->select_ref_clk_src)
+		imx_pcie->drvdata->select_ref_clk_src(imx_pcie);
+
 	imx_pcie_assert_core_reset(imx_pcie);
 
 	if (imx_pcie->drvdata->init_phy)
@@ -1938,6 +1957,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
 		.mode_mask[0] = IMX95_PCIE_DEVICE_TYPE,
 		.core_reset = imx95_pcie_core_reset,
 		.init_phy = imx95_pcie_init_phy,
+		.select_ref_clk_src = imx95_pcie_select_ref_clk_src,
 		.wait_pll_lock = imx95_pcie_wait_for_phy_pll_lock,
 		.enable_ref_clk = imx95_pcie_enable_ref_clk,
 	},
@@ -1992,6 +2012,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
 		.ltssm_mask = IMX95_PCIE_LTSSM_EN,
 		.mode_off[0]  = IMX95_PE0_GEN_CTRL_1,
 		.mode_mask[0] = IMX95_PCIE_DEVICE_TYPE,
+		.select_ref_clk_src = imx95_pcie_select_ref_clk_src,
 		.init_phy = imx95_pcie_init_phy,
 		.core_reset = imx95_pcie_core_reset,
 		.wait_pll_lock = imx95_pcie_wait_for_phy_pll_lock,
-- 
2.53.0