* [PATCH 2/2] usb: port: Don't try to peer unused USB ports based on location
[not found] <20240222133819.4149388-1-mathias.nyman@linux.intel.com>
@ 2024-02-22 13:38 ` Mathias Nyman
2024-02-22 14:06 ` Greg KH
2024-02-22 15:51 ` Paul Menzel
0 siblings, 2 replies; 4+ messages in thread
From: Mathias Nyman @ 2024-02-22 13:38 UTC (permalink / raw)
To: gregkh; +Cc: linux-usb, stern, Mathias Nyman, Paul Menzel, stable
Unused USB ports may have bogus location data in ACPI PLD tables.
This causes port peering failures as these unused USB2 and USB3 ports
location may match.
This is seen on DELL systems where all unused ports return zeroed
location data.
Don't try to peer or match ports that have connect type set to
USB_PORT_NOT_USED.
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/core/port.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index c628c1abc907..4d63496f98b6 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -573,7 +573,7 @@ static int match_location(struct usb_device *peer_hdev, void *p)
struct usb_hub *peer_hub = usb_hub_to_struct_hub(peer_hdev);
struct usb_device *hdev = to_usb_device(port_dev->dev.parent->parent);
- if (!peer_hub)
+ if (!peer_hub || port_dev->connect_type == USB_PORT_NOT_USED)
return 0;
hcd = bus_to_hcd(hdev->bus);
@@ -584,7 +584,8 @@ static int match_location(struct usb_device *peer_hdev, void *p)
for (port1 = 1; port1 <= peer_hdev->maxchild; port1++) {
peer = peer_hub->ports[port1 - 1];
- if (peer && peer->location == port_dev->location) {
+ if (peer && peer->connect_type != USB_PORT_NOT_USED &&
+ peer->location == port_dev->location) {
link_peers_report(port_dev, peer);
return 1; /* done */
}
--
2.25.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH 2/2] usb: port: Don't try to peer unused USB ports based on location
2024-02-22 13:38 ` [PATCH 2/2] usb: port: Don't try to peer unused USB ports based on location Mathias Nyman
@ 2024-02-22 14:06 ` Greg KH
2024-02-22 15:03 ` Mathias Nyman
2024-02-22 15:51 ` Paul Menzel
1 sibling, 1 reply; 4+ messages in thread
From: Greg KH @ 2024-02-22 14:06 UTC (permalink / raw)
To: Mathias Nyman; +Cc: linux-usb, stern, Paul Menzel, stable
On Thu, Feb 22, 2024 at 03:38:19PM +0200, Mathias Nyman wrote:
> Unused USB ports may have bogus location data in ACPI PLD tables.
> This causes port peering failures as these unused USB2 and USB3 ports
> location may match.
>
> This is seen on DELL systems where all unused ports return zeroed
> location data.
>
> Don't try to peer or match ports that have connect type set to
> USB_PORT_NOT_USED.
>
> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
> Cc: stable@vger.kernel.org
> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
What commit does this fix? "all" of them?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 2/2] usb: port: Don't try to peer unused USB ports based on location
2024-02-22 14:06 ` Greg KH
@ 2024-02-22 15:03 ` Mathias Nyman
0 siblings, 0 replies; 4+ messages in thread
From: Mathias Nyman @ 2024-02-22 15:03 UTC (permalink / raw)
To: Greg KH; +Cc: linux-usb, stern, Paul Menzel, stable
On 22.2.2024 16.06, Greg KH wrote:
> On Thu, Feb 22, 2024 at 03:38:19PM +0200, Mathias Nyman wrote:
>> Unused USB ports may have bogus location data in ACPI PLD tables.
>> This causes port peering failures as these unused USB2 and USB3 ports
>> location may match.
>>
>> This is seen on DELL systems where all unused ports return zeroed
>> location data.
>>
>> Don't try to peer or match ports that have connect type set to
>> USB_PORT_NOT_USED.
>>
>> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
>> Cc: stable@vger.kernel.org
>> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
>
> What commit does this fix? "all" of them?
Right, git blame shows the code this fixes was added 10 years ago in 3.16
Fixes: 3bfd659baec8 ("usb: find internal hub tier mismatch via acpi")
Cc: stable@vger.kernel.org # v3.16+
Thanks
Mathias
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 2/2] usb: port: Don't try to peer unused USB ports based on location
2024-02-22 13:38 ` [PATCH 2/2] usb: port: Don't try to peer unused USB ports based on location Mathias Nyman
2024-02-22 14:06 ` Greg KH
@ 2024-02-22 15:51 ` Paul Menzel
1 sibling, 0 replies; 4+ messages in thread
From: Paul Menzel @ 2024-02-22 15:51 UTC (permalink / raw)
To: Mathias Nyman; +Cc: gregkh, linux-usb, stern, stable, Mike Jones
Dear Mathias,
Thank you for your patches fixing the problem.
Am 22.02.24 um 14:38 schrieb Mathias Nyman:
> Unused USB ports may have bogus location data in ACPI PLD tables.
> This causes port peering failures as these unused USB2 and USB3 ports
> location may match.
I comment here, although it should probably be in another branch of this
thread.
If it is a firmware issue, this check should be added to FirmWare Test
Suite (fwts) [1] too (I can report it there), and maybe some debug log
should report this firmware error too.
> This is seen on DELL systems where all unused ports return zeroed
> location data.
As noted in the post scriptum in [2], much more systems seem to be affected.
> Don't try to peer or match ports that have connect type set to
> USB_PORT_NOT_USED.
When grepping the git history, pasting the warning message would help
me. Maybe:
This fixes the warning below on the affected systems:
usb: port power management may be unreliable
If you want to add add the Linux Kernel Bugzilla URLs:
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218465
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218486
I wasn’t able to test the other two systems yet, but maybe it is obvious
from the ACPI tables/ASL code:
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218487 (Dell OptiPlex
5055)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218490 (Dell PowerEdge
T440)
> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
> Cc: stable@vger.kernel.org
> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
> ---
> drivers/usb/core/port.c | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
> index c628c1abc907..4d63496f98b6 100644
> --- a/drivers/usb/core/port.c
> +++ b/drivers/usb/core/port.c
> @@ -573,7 +573,7 @@ static int match_location(struct usb_device *peer_hdev, void *p)
> struct usb_hub *peer_hub = usb_hub_to_struct_hub(peer_hdev);
> struct usb_device *hdev = to_usb_device(port_dev->dev.parent->parent);
>
> - if (!peer_hub)
> + if (!peer_hub || port_dev->connect_type == USB_PORT_NOT_USED)
> return 0;
>
> hcd = bus_to_hcd(hdev->bus);
> @@ -584,7 +584,8 @@ static int match_location(struct usb_device *peer_hdev, void *p)
>
> for (port1 = 1; port1 <= peer_hdev->maxchild; port1++) {
> peer = peer_hub->ports[port1 - 1];
> - if (peer && peer->location == port_dev->location) {
> + if (peer && peer->connect_type != USB_PORT_NOT_USED &&
> + peer->location == port_dev->location) {
> link_peers_report(port_dev, peer);
> return 1; /* done */
> }
Thank you again and kind regards,
Paul
[1]: https://wiki.ubuntu.com/FirmwareTestSuite/
[2]:
https://lore.kernel.org/linux-usb/5406d361-f5b7-4309-b0e6-8c94408f7d75@molgen.mpg.de/
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2024-02-22 15:52 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20240222133819.4149388-1-mathias.nyman@linux.intel.com>
2024-02-22 13:38 ` [PATCH 2/2] usb: port: Don't try to peer unused USB ports based on location Mathias Nyman
2024-02-22 14:06 ` Greg KH
2024-02-22 15:03 ` Mathias Nyman
2024-02-22 15:51 ` Paul Menzel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox