Re: [PATCH v4 0/5] phy: qcom: edp: Add DP/eDP switch for phys

[Yongxing Mou <yongxing.mou@oss.qualcomm.com>]

On 4/23/2026 1:24 AM, Dmitry Baryshkov wrote:
> On Wed, Apr 22, 2026 at 02:01:50PM +0800, Yongxing Mou wrote:
>> Currently the PHY selects the DP/eDP configuration tables in a fixed way,
>> choosing the table when enable. This driver has known issues:
>> 1. The selected table does not match the actual platform mode.
>> 2. It cannot support both modes at the same time.
>>
>> As discussed here[1], this series:
>> 1. Cleans up duplicated and incorrect tables based on the HPG.
>> 2. Fixes the LDO programming error in eDP mode.
>> 3. Adds DP/eDP mode switching support.
>>
>> Note: x1e80100/sa8775p/sc7280/SC8280XP have been tested, while
> 
> Tested with eDP or with mini-DP too?
> 
x1e80100 eDP (hamoa-evk)
sa8775p DP(full-size)
sc7280 (rb3, mini-DP)
sorry for sa8775p mini-DP... i don't have the hardware to test.
>> glymur/sc8180x have not been tested.
>>
>> [1] https://lore.kernel.org/all/20260119-klm_dpphy-v2-1-52252190940b@oss.qualcomm.com/
>>
>> Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
>> ---
>> Changes in v4:
>> - Splite changes.[Dmitry]
>> - Add sc8180x tables in a single chagne.[Dmitry][Konrad]
>> - Link to v3: https://lore.kernel.org/r/20260302-edp_phy-v3-0-ca8888d793b0@oss.qualcomm.com
>>
>> Changes in v3:
>> - Rebase to next-20260224.[Dmitry]
>> - Only enable TX1 LDO when lane counts > 2.[Konrad]
>> - Link to v2: https://lore.kernel.org/all/20260213-edp_phy-v2-0-43c40976435e@oss.qualcomm.com/
>>
>> Changes in v2:
>> - Combine the third patch with the first one.[Dmitry]
>> - Fix code formatting issues.[Konrad][Dmitry]
>> - Update the commit message description.[Dmitry][Konrad]
>> - Fix kodiak swing/pre_emp table values.[Konrad]
>>
>> ---
>> Yongxing Mou (5):
>>        phy: qcom: edp: Unify generic DP/eDP swing and pre-emphasis tables
>>        phy: qcom: edp: Add eDP/DP mode switch support
>>        phy: qcom: edp: Add SC7280/SC8180X swing/pre-emphasis tables
>>        phy: qcom: edp: Fix AUX_CFG8 programming for DP mode
>>        phy: qcom: edp: Add PHY-specific LDO config for eDP low vdiff
>>
>>   drivers/phy/qualcomm/phy-qcom-edp.c | 221 ++++++++++++++++++++++++++++--------
>>   1 file changed, 173 insertions(+), 48 deletions(-)
>> ---
>> base-commit: bee6ea30c48788e18348309f891ed8afbf7702ac
>> change-id: 20260205-edp_phy-1eca3ed074c0
>>
>> Best regards,
>> -- 
>> Yongxing Mou <yongxing.mou@oss.qualcomm.com>
>>
>>
>> -- 
>> linux-phy mailing list
>> linux-phy@lists.infradead.org
>> https://lists.infradead.org/mailman/listinfo/linux-phy
>