Re: [PATCH v4 2/5] phy: qcom: edp: Add eDP/DP mode switch support

[Yongxing Mou <yongxing.mou@oss.qualcomm.com>]

On 4/23/2026 12:14 AM, Dmitry Baryshkov wrote:
> On Wed, Apr 22, 2026 at 02:01:52PM +0800, Yongxing Mou wrote:
>> The eDP PHY supports both eDP/DP modes, each requires a different table.
>> The current driver doesn't support both modes and use either the eDP or
>> DP table when enable the platform.
> 
> This is not quite true. The driver supports both modes, but it uses a
> fixed static table for eDP programming.
> 
> Other than the commit message, LGTM.
> 
Will modify next patch.
> 
>> Add a separate set of tables for eDP
>> and DP modes, and select the appropriate table based on the current mode.
>>
>> Glymur's DP mode table differs from the other platforms, add a dedicated
>> table for it.
>>
>> Since both modes are supported, so also fixes the table mismatch for
>> X1E80100(eDP) and SA8775P(DP).
>>
>> Cc: stable@vger.kernel.org
>> Fixes: 3f12bf16213c ("phy: qcom: edp: Add support for eDP PHY on SA8775P")
>> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
>> Signed-off-by: Yongxing Mou <yongxing.mou@oss.qualcomm.com>
>> ---
>>   drivers/phy/qualcomm/phy-qcom-edp.c | 46 +++++++++++++++++++++++++++----------
>>   1 file changed, 34 insertions(+), 12 deletions(-)
>>
>