[PATCH v4 5/8] riscv: Rework Sifive CLINT as UCLASS_TIMER driver

[Sean Anderson <seanga2@gmail.com>]

On 9/15/20 4:09 AM, Bin Meng wrote:
> Hi Sean,
> 
> On Thu, Sep 10, 2020 at 4:09 AM Sean Anderson <seanga2@gmail.com> wrote:
>>
>> This converts the clint driver from the riscv-specific interface to be a
>> DM-based UCLASS_TIMER driver. In addition, the SiFive DDR driver previously
>> implicitly depended on the CLINT to select REGMAP.
>>
>> Unlike Andes's PLMT/PLIC (which AFAIK never have anything pass it a dtb),
>> the SiFive CLINT is part of the device tree passed in by qemu. This device
>> tree doesn't have a clocks or clock-frequency property on clint, so we need
>> to fall back on the timebase-frequency property. Perhaps in the future we
>> can get a clock-frequency property added to the qemu dtb.
>>
>> Unlike with the Andes PLMT, the Sifive CLINT is also an IPI controller.
>> RISCV_SYSCON_CLINT is retained for this purpose.
>>
>> Signed-off-by: Sean Anderson <seanga2@gmail.com>
>> Reviewed-by: Pragnesh Patel <pragnesh.patel@openfive.com>
>> ---
>> This patch builds but has only been tested on the K210 and QEMU. It has NOT
>> been tested on a HiFive.
>>
>> Changes in v4:
>> - Use timer_timebase_fallback
>>
>> Changes in v3:
>> - Don't initialize the IPI in spl_invoke_opensbi. Further testing has
>>   revealed it to be unnecessary.
>>
>>  arch/riscv/Kconfig            |  4 ---
>>  arch/riscv/lib/sifive_clint.c | 66 +++++++++++++++++++----------------
>>  drivers/ram/sifive/Kconfig    |  2 ++
>>  3 files changed, 38 insertions(+), 34 deletions(-)
>>
>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
>> index d9155b9bab..aaa3b833a5 100644
>> --- a/arch/riscv/Kconfig
>> +++ b/arch/riscv/Kconfig
>> @@ -155,10 +155,6 @@ config 64BIT
>>  config SIFIVE_CLINT
>>         bool
>>         depends on RISCV_MMODE || SPL_RISCV_MMODE
>> -       select REGMAP
>> -       select SYSCON
>> -       select SPL_REGMAP if SPL
>> -       select SPL_SYSCON if SPL
>>         help
>>           The SiFive CLINT block holds memory-mapped control and status registers
>>           associated with software and timer interrupts.
>> diff --git a/arch/riscv/lib/sifive_clint.c b/arch/riscv/lib/sifive_clint.c
>> index b9a2c649cc..c9704c596f 100644
>> --- a/arch/riscv/lib/sifive_clint.c
>> +++ b/arch/riscv/lib/sifive_clint.c
>> @@ -8,9 +8,9 @@
>>   */
>>
>>  #include <common.h>
>> +#include <clk.h>
>>  #include <dm.h>
>> -#include <regmap.h>
>> -#include <syscon.h>
>> +#include <timer.h>
>>  #include <asm/io.h>
>>  #include <asm/syscon.h>
>>  #include <linux/err.h>
>> @@ -24,35 +24,19 @@
>>
>>  DECLARE_GLOBAL_DATA_PTR;
>>
>> -int riscv_get_time(u64 *time)
>> -{
>> -       /* ensure timer register base has a sane value */
>> -       riscv_init_ipi();
>> -
>> -       *time = readq((void __iomem *)MTIME_REG(gd->arch.clint));
>> -
>> -       return 0;
>> -}
>> -
>> -int riscv_set_timecmp(int hart, u64 cmp)
>> -{
>> -       /* ensure timer register base has a sane value */
>> -       riscv_init_ipi();
>> -
>> -       writeq(cmp, (void __iomem *)MTIMECMP_REG(gd->arch.clint, hart));
>> -
>> -       return 0;
>> -}
>> -
>>  int riscv_init_ipi(void)
>>  {
>> -       if (!gd->arch.clint) {
>> -               long *ret = syscon_get_first_range(RISCV_SYSCON_CLINT);
>> +       int ret;
>> +       struct udevice *dev;
>>
>> -               if (IS_ERR(ret))
>> -                       return PTR_ERR(ret);
>> -               gd->arch.clint = ret;
>> -       }
>> +       ret = uclass_get_device_by_driver(UCLASS_TIMER,
>> +                                         DM_GET_DRIVER(sifive_clint), &dev);
>> +       if (ret)
>> +               return ret;
>> +
>> +       gd->arch.clint = dev_read_addr_ptr(dev);
>> +       if (!gd->arch.clint)
>> +               return -EINVAL;
>>
>>         return 0;
>>  }
>> @@ -78,14 +62,36 @@ int riscv_get_ipi(int hart, int *pending)
>>         return 0;
>>  }
>>
>> +static int sifive_clint_get_count(struct udevice *dev, u64 *count)
>> +{
>> +       *count = readq((void __iomem *)MTIME_REG(dev->priv));
>> +
>> +       return 0;
>> +}
>> +
>> +static const struct timer_ops sifive_clint_ops = {
>> +       .get_count = sifive_clint_get_count,
>> +};
>> +
>> +static int sifive_clint_probe(struct udevice *dev)
>> +{
>> +       dev->priv = dev_read_addr_ptr(dev);
>> +       if (!dev->priv)
>> +               return -EINVAL;
>> +
>> +       return timer_timebase_fallback(dev);
>> +}
>> +
>>  static const struct udevice_id sifive_clint_ids[] = {
>> -       { .compatible = "riscv,clint0", .data = RISCV_SYSCON_CLINT },
>> +       { .compatible = "riscv,clint0" },
>>         { }
>>  };
>>
>>  U_BOOT_DRIVER(sifive_clint) = {
>>         .name           = "sifive_clint",
>> -       .id             = UCLASS_SYSCON,
>> +       .id             = UCLASS_TIMER,
>>         .of_match       = sifive_clint_ids,
>> +       .probe          = sifive_clint_probe,
>> +       .ops            = &sifive_clint_ops,
>>         .flags          = DM_FLAG_PRE_RELOC,
>>  };
>> diff --git a/drivers/ram/sifive/Kconfig b/drivers/ram/sifive/Kconfig
>> index 6aca22ab2a..31ad0a7e45 100644
>> --- a/drivers/ram/sifive/Kconfig
>> +++ b/drivers/ram/sifive/Kconfig
>> @@ -9,5 +9,7 @@ config SIFIVE_FU540_DDR
>>         bool "SiFive FU540 DDR driver"
>>         depends on RAM_SIFIVE
>>         default y if TARGET_SIFIVE_FU540
>> +       select REGMAP
>> +       select SPL_REGMAP if SPL
> 
> This should be dropped. Please see the patch below:
> http://patchwork.ozlabs.org/project/uboot/patch/1600157107-57175-2-git-send-email-bmeng.cn at gmail.com/

Ok, I can drop this and add a dependency.

>>         help
>>           This enables DDR support for the platforms based on SiFive FU540 SoC.
>> --
> 
> Regards,
> Bin
>