[U-Boot] [PATCH] 85xx/p2020ds: Use is_serdes_configured() to determine of PCIe enabled

[Kumar Gala <galak@kernel.crashing.org>]

The new is_serdes_configured covers a broader range of devices than the
PCI specific code.  Use it instead as we convert away from the
is_fsl_pci_cfg() code.

Additionally move to setting LAWs for PCI based on if its configured.
Also updated PCI FDT fixup code to remove PCI controllers from dtb if
they are not configured.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 board/freescale/p2020ds/law.c     |    6 ------
 board/freescale/p2020ds/p2020ds.c |   27 +++++++++++++++++++++++----
 2 files changed, 23 insertions(+), 10 deletions(-)

diff --git a/board/freescale/p2020ds/law.c b/board/freescale/p2020ds/law.c
index 28ed2ed..c90c9ae 100644
--- a/board/freescale/p2020ds/law.c
+++ b/board/freescale/p2020ds/law.c
@@ -29,12 +29,6 @@
 
 struct law_entry law_table[] = {
 	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-	SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
-	SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_2),
-	SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
-	SET_LAW(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_3),
-	SET_LAW(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_3),
 	SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC),
 	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
 };
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index f0ff209..7b76be8 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright 2007-2010 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -30,6 +30,7 @@
 #include <asm/fsl_pci.h>
 #include <asm/fsl_ddr_sdram.h>
 #include <asm/io.h>
+#include <asm/fsl_serdes.h>
 #include <miiphy.h>
 #include <libfdt.h>
 #include <fdt_support.h>
@@ -210,9 +211,13 @@ void pci_init_board(void)
 
 	puts("\n");
 #ifdef CONFIG_PCIE2
-	pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
+	pcie_configured = is_serdes_configured(PCIE2);
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)) {
+		set_next_law(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M,
+				LAW_TRGT_IF_PCIE_2);
+		set_next_law(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K,
+				LAW_TRGT_IF_PCIE_2);
 		SET_STD_PCIE_INFO(pci_info[num], 2);
 		pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
 		printf("    PCIE2 connected to ULI as %s (base addr %lx)\n",
@@ -250,9 +255,13 @@ void pci_init_board(void)
 #endif
 
 #ifdef CONFIG_PCIE3
-	pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel);
+	pcie_configured = is_serdes_configured(PCIE3);
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)) {
+		set_next_law(CONFIG_SYS_PCIE3_MEM_PHYS, LAW_SIZE_512M,
+				LAW_TRGT_IF_PCIE_3);
+		set_next_law(CONFIG_SYS_PCIE3_IO_PHYS, LAW_SIZE_64K,
+				LAW_TRGT_IF_PCIE_3);
 		SET_STD_PCIE_INFO(pci_info[num], 3);
 		pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
 		printf("    PCIE3 connected to Slot 1 as %s (base addr %lx)\n",
@@ -269,9 +278,13 @@ void pci_init_board(void)
 #endif
 
 #ifdef CONFIG_PCIE1
-	pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
+	pcie_configured = is_serdes_configured(PCIE1);
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)) {
+		set_next_law(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M,
+				LAW_TRGT_IF_PCIE_1);
+		set_next_law(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K,
+				LAW_TRGT_IF_PCIE_1);
 		SET_STD_PCIE_INFO(pci_info[num], 1);
 		pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
 		printf("    PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
@@ -517,12 +530,18 @@ void ft_board_setup(void *blob, bd_t *bd)
 
 #ifdef CONFIG_PCIE3
 	ft_fsl_pci_setup(blob, "pci0", &pcie3_hose);
+#else
+	ft_fsl_pci_setup(blob, "pci0", NULL);
 #endif
 #ifdef CONFIG_PCIE2
 	ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
+#else
+	ft_fsl_pci_setup(blob, "pci1", NULL);
 #endif
 #ifdef CONFIG_PCIE1
 	ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
+#else
+	ft_fsl_pci_setup(blob, "pci2", NULL);
 #endif
 #ifdef CONFIG_FSL_SGMII_RISER
 	fsl_sgmii_riser_fdt_fixup(blob);
-- 
1.6.0.6