From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [Patch v2 4/5] ARMv8/ls2085a: Enable secondary cores
Date: Tue, 19 Aug 2014 13:28:01 -0700 [thread overview]
Message-ID: <1408480082-4617-4-git-send-email-yorksun@freescale.com> (raw)
In-Reply-To: <1408480082-4617-1-git-send-email-yorksun@freescale.com>
Spin table is at the very beginning of boot code. Each core has an individual
release address within the spin table, the ft_cpu_setup fn updates the
"cpu-release-addr" property of each cpu node with the corresponding release
address.
Also fix CPU_RELEASE_ADDR to point to secondary_boot_func.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Arnab Basu <arnab.basu@freescale.com>
---
Change log
v2: Use individual spin table for each core by default
board/freescale/ls2085a/ls2085a.c | 2 ++
include/configs/ls2085a_common.h | 9 ++++++---
2 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/board/freescale/ls2085a/ls2085a.c b/board/freescale/ls2085a/ls2085a.c
index a18db1d..3daa787 100644
--- a/board/freescale/ls2085a/ls2085a.c
+++ b/board/freescale/ls2085a/ls2085a.c
@@ -88,6 +88,8 @@ void ft_board_setup(void *blob, bd_t *bd)
phys_addr_t base;
phys_size_t size;
+ ft_cpu_setup(blob, bd);
+
/* limit the memory size to bank 1 until Linux can handle 40-bit PA */
base = getenv_bootm_low();
size = getenv_bootm_size();
diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h
index 2bd5a47..4c258ca 100644
--- a/include/configs/ls2085a_common.h
+++ b/include/configs/ls2085a_common.h
@@ -45,14 +45,16 @@
#define CONFIG_SYS_FSL_DDR_INTLV_256B /* force 256 byte interleaving */
-/* SMP Definitions */
-#define CPU_RELEASE_ADDR CONFIG_SYS_INIT_SP_ADDR
-
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
#define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL
+/*
+ * SMP Definitions
+ */
+#define CPU_RELEASE_ADDR secondary_boot_func
+
/* Generic Timer Definitions */
#define COUNTER_FREQUENCY 12000000 /* 12MHz */
@@ -167,6 +169,7 @@
/* Miscellaneous configurable options */
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
+#define CONFIG_ARCH_EARLY_INIT_R
/* Physical Memory Map */
/* fixme: these need to be checked against the board */
--
1.7.9.5
next prev parent reply other threads:[~2014-08-19 20:28 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-19 20:27 [U-Boot] [Patch v2 1/5] fdt_support: Move of_read_number to fdt_support.h York Sun
2014-08-19 20:27 ` [U-Boot] [Patch v2 2/5] fdt_support: Make of_bus_default_count_cells non static York Sun
2014-08-19 20:28 ` [U-Boot] [Patch v2 3/5] armv8/fsl-lsch3: Release secondary cores from boot hold off with Boot Page York Sun
2014-08-21 13:47 ` Mark Rutland
2014-08-21 18:32 ` York Sun
2014-08-21 18:50 ` bhupesh.sharma at freescale.com
2014-08-22 7:02 ` Arnab Basu
2014-08-22 11:24 ` Mark Rutland
2014-08-22 11:38 ` Mark Rutland
2014-08-22 11:41 ` Mark Rutland
2014-08-19 20:28 ` York Sun [this message]
2014-08-19 20:28 ` [U-Boot] [Patch v2 5/5] ARMv8/ls2085a: Move u-boot location to make room for RCW York Sun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408480082-4617-4-git-send-email-yorksun@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox