* [U-Boot] [PATCH 1/1] m68k/lib: fix serial driver relocation
@ 2012-11-23 22:23 Angelo Dureghello
2013-01-11 14:45 ` Jens Scharsig
0 siblings, 1 reply; 3+ messages in thread
From: Angelo Dureghello @ 2012-11-23 22:23 UTC (permalink / raw)
To: u-boot
Fix coldfire serial driver bindings no more relocated to ram after last
changes to drivers/serial/serial.c (regression).
Serial initialization in ram has to be called after that gd->reloc_off is
calculated.
Signed-off-by: Angelo Dureghello <sysamfw@gmail.com>
Cc: Jason Jin <jason.jin@freescale.com>
---
diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c
index 02d73fd..373570c 100644
--- a/arch/m68k/lib/board.c
+++ b/arch/m68k/lib/board.c
@@ -402,14 +402,14 @@ void board_init_r (gd_t *id, ulong dest_addr)
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
- serial_initialize();
-
debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
WATCHDOG_RESET ();
gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
+ serial_initialize();
+
monitor_flash_len = (ulong)&__init_end - dest_addr;
#if defined(CONFIG_NEEDS_MANUAL_RELOC)
^ permalink raw reply related [flat|nested] 3+ messages in thread* [U-Boot] [PATCH 1/1] m68k/lib: fix serial driver relocation
2012-11-23 22:23 [U-Boot] [PATCH 1/1] m68k/lib: fix serial driver relocation Angelo Dureghello
@ 2013-01-11 14:45 ` Jens Scharsig
2013-01-11 23:45 ` Tom Rini
0 siblings, 1 reply; 3+ messages in thread
From: Jens Scharsig @ 2013-01-11 14:45 UTC (permalink / raw)
To: u-boot
Am 2012-11-23 23:23, schrieb Angelo Dureghello:
> Fix coldfire serial driver bindings no more relocated to ram after last
> changes to drivers/serial/serial.c (regression).
> Serial initialization in ram has to be called after that gd->reloc_off is
> calculated.
>
> Signed-off-by: Angelo Dureghello <sysamfw@gmail.com>
> Cc: Jason Jin <jason.jin@freescale.com>
> ---
> diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c
> index 02d73fd..373570c 100644
> --- a/arch/m68k/lib/board.c
> +++ b/arch/m68k/lib/board.c
> @@ -402,14 +402,14 @@ void board_init_r (gd_t *id, ulong dest_addr)
>
> gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
>
> - serial_initialize();
> -
> debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
>
> WATCHDOG_RESET ();
>
> gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
>
> + serial_initialize();
> +
> monitor_flash_len = (ulong)&__init_end - dest_addr;
>
> #if defined(CONFIG_NEEDS_MANUAL_RELOC)
>
Acked-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
Tested-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
^ permalink raw reply [flat|nested] 3+ messages in thread* [U-Boot] [PATCH 1/1] m68k/lib: fix serial driver relocation
2013-01-11 14:45 ` Jens Scharsig
@ 2013-01-11 23:45 ` Tom Rini
0 siblings, 0 replies; 3+ messages in thread
From: Tom Rini @ 2013-01-11 23:45 UTC (permalink / raw)
To: u-boot
On Fri, Jan 11, 2013 at 03:45:26PM +0100, Jens Scharsig wrote:
> Am 2012-11-23 23:23, schrieb Angelo Dureghello:
> > Fix coldfire serial driver bindings no more relocated to ram after last
> > changes to drivers/serial/serial.c (regression).
> > Serial initialization in ram has to be called after that gd->reloc_off is
> > calculated.
> >
> > Signed-off-by: Angelo Dureghello <sysamfw@gmail.com>
> > Cc: Jason Jin <jason.jin@freescale.com>
> > ---
> > diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c
> > index 02d73fd..373570c 100644
> > --- a/arch/m68k/lib/board.c
> > +++ b/arch/m68k/lib/board.c
> > @@ -402,14 +402,14 @@ void board_init_r (gd_t *id, ulong dest_addr)
> >
> > gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
> >
> > - serial_initialize();
> > -
> > debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
> >
> > WATCHDOG_RESET ();
> >
> > gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
> >
> > + serial_initialize();
> > +
> > monitor_flash_len = (ulong)&__init_end - dest_addr;
> >
> > #if defined(CONFIG_NEEDS_MANUAL_RELOC)
> >
>
> Acked-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
> Tested-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130111/4ff958be/attachment.pgp>
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-01-11 23:45 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-11-23 22:23 [U-Boot] [PATCH 1/1] m68k/lib: fix serial driver relocation Angelo Dureghello
2013-01-11 14:45 ` Jens Scharsig
2013-01-11 23:45 ` Tom Rini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox