U-Boot Archive on lore.kernel.org
 help / color / mirror / Atom feed
* [U-Boot] Pull request v2: u-boot-blackfin
@ 2013-05-14  6:20 Sonic Zhang
  2013-05-14 19:17 ` Tom Rini
  0 siblings, 1 reply; 4+ messages in thread
From: Sonic Zhang @ 2013-05-14  6:20 UTC (permalink / raw)
  To: u-boot

Hi Tom,

Please pull the following patches from u-boot-blackfin into your tree.
In this second pull request:
- CONFIG_CMD_SOFTSWITCH document is added to the README file.
- The tools/patman folder is synced with upstream master.
- 3 missing patches were sent to the mailing list.

Thanks

The following changes since commit bbd0f7e3ba66d288a2f146f1c7797801e04598ae:

  Move FDT_RAMDISK_OVERHEAD from fdt.h to libfdt_env.h (2013-05-10
19:04:50 -0400)

are available in the git repository at:

  git://git.denx.de/u-boot-blackfin.git master

for you to fetch changes up to da34aae5fba36c1f1989fdd41fffa723f300eaad:

  bfin: Move gpio support for bf54x and bf60x into the generic driver
folder. (2013-05-13 16:30:27 +0800)

----------------------------------------------------------------
Bob Liu (3):
      blackfin: reduce size of u-boot.ldr in bf548-ezkit default config.
      blackfin: add baudrate to bdinfo
      blackfin: bf609: add softswitch config command

Marek Vasut (1):
      blackfin: The buf variable in bfin_mac.c is not used and produces warning,

Mike Frysinger (1):
      Blackfin: adjust asm constraints with NMI workaround

Scott Jiang (3):
      bfin: Remove spi dma function in bf5xx.
      bfin: discard invalid data and clear RXS in bf5xx spi driver
      bf609: add SPI register base address

Sonic Zhang (14):
      blackfin: Change the member's type in dma structures.
      blackfin: limit the max memory dma peripheral transfer size to 4 bytes.
      blackfin: run core1 from L1 code sram start address in uboot
init code on core 0
      blackfin: Set correct early debug serial baudrate.
      blackfin: Correct early serial mess output in BYPASS boot mode.
      blackfin: bf609: implement soft switch
      blackfin: Fit u-boot image size into limited nor flash on blackfin.
      blackfin: Enable early print via the generic serial API.
      blackfin: Add memory virtual console to blackfin serial driver.
      blackfin: Uart divisor should be set after their values are generated.
      blackfin: Move blackfin watchdog driver out of the blackfin arch folder.
      blackfin: Move blackfin serial driver out of blackfin arch folder.
      blackfin: Add comments for watchdog event initialization.
      bfin: Move gpio support for bf54x and bf60x into the generic
driver folder.

 README                                             |   1 +
 arch/blackfin/cpu/Makefile                         |   4 +-
 arch/blackfin/cpu/cpu.c                            |  32 +-
 arch/blackfin/cpu/gpio.c                           | 145 +------
 arch/blackfin/cpu/initcode.c                       |  71 ++--
 arch/blackfin/cpu/start.S                          |  29 +-
 arch/blackfin/include/asm/clock.h                  |  78 ++++
 arch/blackfin/include/asm/dma.h                    |  24 +-
 arch/blackfin/include/asm/gpio.h                   |  62 +--
 arch/blackfin/include/asm/mach-bf561/BF561_def.h   |   2 +
 arch/blackfin/include/asm/mach-bf609/BF609_def.h   |   5 +
 arch/blackfin/include/asm/portmux.h                |   5 -
 arch/blackfin/{cpu => include/asm}/serial.h        |  23 +-
 arch/blackfin/{cpu => include/asm}/serial1.h       |  48 +--
 arch/blackfin/{cpu => include/asm}/serial4.h       |  27 +-
 arch/blackfin/include/asm/soft_switch.h            |  18 +
 arch/blackfin/lib/board.c                          |   6 +-
 arch/blackfin/lib/clocks.c                         |  12 +-
 arch/blackfin/lib/string.c                         |   9 +-
 board/bf609-ezkit/soft_switch.c                    | 171 ++++++++
 board/bf609-ezkit/soft_switch.h                    |  80 ++++
 common/Makefile                                    |   1 +
 common/cmd_softswitch.c                            |  41 ++
 doc/README.watchdog                                |   3 +
 drivers/gpio/Makefile                              |   1 +
 drivers/gpio/adi_gpio2.c                           | 440 +++++++++++++++++++++
 drivers/net/bfin_mac.c                             |   2 -
 drivers/serial/Makefile                            |   1 +
 .../cpu/serial.c => drivers/serial/serial_bfin.c   | 110 ++++--
 drivers/spi/bfin_spi.c                             | 105 +----
 drivers/watchdog/Makefile                          |   1 +
 .../cpu/watchdog.c => drivers/watchdog/bfin_wdt.c  |   7 +-
 include/configs/bf527-ezkit.h                      |  12 +-
 include/configs/bf537-stamp.h                      |  10 +-
 include/configs/bf548-ezkit.h                      |  25 +-
 include/configs/bf561-ezkit.h                      |   5 +
 include/configs/bf609-ezkit.h                      |  10 +
 include/configs/bfin_adi_common.h                  |  14 +-
 include/watchdog.h                                 |   3 +-
 39 files changed, 1164 insertions(+), 479 deletions(-)
 create mode 100644 arch/blackfin/include/asm/clock.h
 rename arch/blackfin/{cpu => include/asm}/serial.h (82%)
 rename arch/blackfin/{cpu => include/asm}/serial1.h (94%)
 rename arch/blackfin/{cpu => include/asm}/serial4.h (86%)
 create mode 100644 arch/blackfin/include/asm/soft_switch.h
 create mode 100644 board/bf609-ezkit/soft_switch.c
 create mode 100644 board/bf609-ezkit/soft_switch.h
 create mode 100644 common/cmd_softswitch.c
 create mode 100644 drivers/gpio/adi_gpio2.c
 rename arch/blackfin/cpu/serial.c => drivers/serial/serial_bfin.c (79%)
 rename arch/blackfin/cpu/watchdog.c => drivers/watchdog/bfin_wdt.c (64%)

^ permalink raw reply	[flat|nested] 4+ messages in thread
* [U-Boot] Pull request v2: u-boot-blackfin
@ 2014-08-11  2:55 Sonic Zhang
  2014-08-12 21:00 ` Tom Rini
  0 siblings, 1 reply; 4+ messages in thread
From: Sonic Zhang @ 2014-08-11  2:55 UTC (permalink / raw)
  To: u-boot

Hi Tom,

Please pull the following patches for Blackfin from u-boot-blackfin
into your tree.

Thanks

Sonic Zhang


The following changes since commit e76b933e02e1b38e48754c435e9dba1c0deeb3c6:

  Prepare v2014.10-rc1 (2014-08-06 09:12:58 -0400)

are available in the git repository at:

  git://git.denx.de/u-boot-blackfin.git master

for you to fetch changes up to d54d7eb965e96fc451beaac58cd79efdcf848fd9:

  support blackfin board initialization in generic board_f (2014-08-07
15:15:19 +0800)

----------------------------------------------------------------
Aaron Wu (1):
      bfin: add register define required by core B on dual core BF609 processor

Scott Jiang (1):
      blackfin: spi clock is in sysclk1 domain instead of sysclk0

Sonic Zhang (2):
      blackfin: convert blackfin board_f and board_r to use generic
board init functions
      support blackfin board initialization in generic board_f

 arch/blackfin/config.mk                          |   3 +
 arch/blackfin/cpu/cpu.c                          | 334 +++++++++++++++--
 arch/blackfin/cpu/start.S                        |  14 +-
 arch/blackfin/cpu/u-boot.lds                     |   4 +-
 arch/blackfin/include/asm/clock.h                |   2 +-
 arch/blackfin/include/asm/config.h               |   4 +
 arch/blackfin/include/asm/mach-bf609/BF609_def.h |   2 +
 arch/blackfin/include/asm/u-boot.h               |   3 +
 arch/blackfin/lib/Makefile                       |   7 +-
 arch/blackfin/lib/board.c                        | 443 -----------------------
 arch/blackfin/lib/sections.c                     |  11 +
 common/board_f.c                                 |  45 ++-
 include/configs/bf506f-ezkit.h                   |   5 +-
 include/configs/bf533-stamp.h                    |   3 +-
 include/configs/bf538f-ezkit.h                   |   3 +-
 include/watchdog.h                               |   3 +-
 16 files changed, 380 insertions(+), 506 deletions(-)
 delete mode 100644 arch/blackfin/lib/board.c
 create mode 100644 arch/blackfin/lib/sections.c

^ permalink raw reply	[flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-08-12 21:00 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-05-14  6:20 [U-Boot] Pull request v2: u-boot-blackfin Sonic Zhang
2013-05-14 19:17 ` Tom Rini
  -- strict thread matches above, loose matches on Subject: below --
2014-08-11  2:55 Sonic Zhang
2014-08-12 21:00 ` Tom Rini

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox