* [U-Boot] Pull request v2: u-boot-blackfin
@ 2013-05-14 6:20 Sonic Zhang
2013-05-14 19:17 ` Tom Rini
0 siblings, 1 reply; 4+ messages in thread
From: Sonic Zhang @ 2013-05-14 6:20 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull the following patches from u-boot-blackfin into your tree.
In this second pull request:
- CONFIG_CMD_SOFTSWITCH document is added to the README file.
- The tools/patman folder is synced with upstream master.
- 3 missing patches were sent to the mailing list.
Thanks
The following changes since commit bbd0f7e3ba66d288a2f146f1c7797801e04598ae:
Move FDT_RAMDISK_OVERHEAD from fdt.h to libfdt_env.h (2013-05-10
19:04:50 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-blackfin.git master
for you to fetch changes up to da34aae5fba36c1f1989fdd41fffa723f300eaad:
bfin: Move gpio support for bf54x and bf60x into the generic driver
folder. (2013-05-13 16:30:27 +0800)
----------------------------------------------------------------
Bob Liu (3):
blackfin: reduce size of u-boot.ldr in bf548-ezkit default config.
blackfin: add baudrate to bdinfo
blackfin: bf609: add softswitch config command
Marek Vasut (1):
blackfin: The buf variable in bfin_mac.c is not used and produces warning,
Mike Frysinger (1):
Blackfin: adjust asm constraints with NMI workaround
Scott Jiang (3):
bfin: Remove spi dma function in bf5xx.
bfin: discard invalid data and clear RXS in bf5xx spi driver
bf609: add SPI register base address
Sonic Zhang (14):
blackfin: Change the member's type in dma structures.
blackfin: limit the max memory dma peripheral transfer size to 4 bytes.
blackfin: run core1 from L1 code sram start address in uboot
init code on core 0
blackfin: Set correct early debug serial baudrate.
blackfin: Correct early serial mess output in BYPASS boot mode.
blackfin: bf609: implement soft switch
blackfin: Fit u-boot image size into limited nor flash on blackfin.
blackfin: Enable early print via the generic serial API.
blackfin: Add memory virtual console to blackfin serial driver.
blackfin: Uart divisor should be set after their values are generated.
blackfin: Move blackfin watchdog driver out of the blackfin arch folder.
blackfin: Move blackfin serial driver out of blackfin arch folder.
blackfin: Add comments for watchdog event initialization.
bfin: Move gpio support for bf54x and bf60x into the generic
driver folder.
README | 1 +
arch/blackfin/cpu/Makefile | 4 +-
arch/blackfin/cpu/cpu.c | 32 +-
arch/blackfin/cpu/gpio.c | 145 +------
arch/blackfin/cpu/initcode.c | 71 ++--
arch/blackfin/cpu/start.S | 29 +-
arch/blackfin/include/asm/clock.h | 78 ++++
arch/blackfin/include/asm/dma.h | 24 +-
arch/blackfin/include/asm/gpio.h | 62 +--
arch/blackfin/include/asm/mach-bf561/BF561_def.h | 2 +
arch/blackfin/include/asm/mach-bf609/BF609_def.h | 5 +
arch/blackfin/include/asm/portmux.h | 5 -
arch/blackfin/{cpu => include/asm}/serial.h | 23 +-
arch/blackfin/{cpu => include/asm}/serial1.h | 48 +--
arch/blackfin/{cpu => include/asm}/serial4.h | 27 +-
arch/blackfin/include/asm/soft_switch.h | 18 +
arch/blackfin/lib/board.c | 6 +-
arch/blackfin/lib/clocks.c | 12 +-
arch/blackfin/lib/string.c | 9 +-
board/bf609-ezkit/soft_switch.c | 171 ++++++++
board/bf609-ezkit/soft_switch.h | 80 ++++
common/Makefile | 1 +
common/cmd_softswitch.c | 41 ++
doc/README.watchdog | 3 +
drivers/gpio/Makefile | 1 +
drivers/gpio/adi_gpio2.c | 440 +++++++++++++++++++++
drivers/net/bfin_mac.c | 2 -
drivers/serial/Makefile | 1 +
.../cpu/serial.c => drivers/serial/serial_bfin.c | 110 ++++--
drivers/spi/bfin_spi.c | 105 +----
drivers/watchdog/Makefile | 1 +
.../cpu/watchdog.c => drivers/watchdog/bfin_wdt.c | 7 +-
include/configs/bf527-ezkit.h | 12 +-
include/configs/bf537-stamp.h | 10 +-
include/configs/bf548-ezkit.h | 25 +-
include/configs/bf561-ezkit.h | 5 +
include/configs/bf609-ezkit.h | 10 +
include/configs/bfin_adi_common.h | 14 +-
include/watchdog.h | 3 +-
39 files changed, 1164 insertions(+), 479 deletions(-)
create mode 100644 arch/blackfin/include/asm/clock.h
rename arch/blackfin/{cpu => include/asm}/serial.h (82%)
rename arch/blackfin/{cpu => include/asm}/serial1.h (94%)
rename arch/blackfin/{cpu => include/asm}/serial4.h (86%)
create mode 100644 arch/blackfin/include/asm/soft_switch.h
create mode 100644 board/bf609-ezkit/soft_switch.c
create mode 100644 board/bf609-ezkit/soft_switch.h
create mode 100644 common/cmd_softswitch.c
create mode 100644 drivers/gpio/adi_gpio2.c
rename arch/blackfin/cpu/serial.c => drivers/serial/serial_bfin.c (79%)
rename arch/blackfin/cpu/watchdog.c => drivers/watchdog/bfin_wdt.c (64%)
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] Pull request v2: u-boot-blackfin
2013-05-14 6:20 Sonic Zhang
@ 2013-05-14 19:17 ` Tom Rini
0 siblings, 0 replies; 4+ messages in thread
From: Tom Rini @ 2013-05-14 19:17 UTC (permalink / raw)
To: u-boot
On Tue, May 14, 2013 at 02:20:46PM +0800, Sonic Zhang wrote:
> Hi Tom,
>
> Please pull the following patches from u-boot-blackfin into your tree.
> In this second pull request:
> - CONFIG_CMD_SOFTSWITCH document is added to the README file.
> - The tools/patman folder is synced with upstream master.
> - 3 missing patches were sent to the mailing list.
>
> Thanks
>
> The following changes since commit bbd0f7e3ba66d288a2f146f1c7797801e04598ae:
>
> Move FDT_RAMDISK_OVERHEAD from fdt.h to libfdt_env.h (2013-05-10
> 19:04:50 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-blackfin.git master
>
> for you to fetch changes up to da34aae5fba36c1f1989fdd41fffa723f300eaad:
>
> bfin: Move gpio support for bf54x and bf60x into the generic driver
> folder. (2013-05-13 16:30:27 +0800)
>
> ----------------------------------------------------------------
> Bob Liu (3):
> blackfin: reduce size of u-boot.ldr in bf548-ezkit default config.
> blackfin: add baudrate to bdinfo
> blackfin: bf609: add softswitch config command
>
> Marek Vasut (1):
> blackfin: The buf variable in bfin_mac.c is not used and produces warning,
>
> Mike Frysinger (1):
> Blackfin: adjust asm constraints with NMI workaround
>
> Scott Jiang (3):
> bfin: Remove spi dma function in bf5xx.
> bfin: discard invalid data and clear RXS in bf5xx spi driver
> bf609: add SPI register base address
>
> Sonic Zhang (14):
> blackfin: Change the member's type in dma structures.
> blackfin: limit the max memory dma peripheral transfer size to 4 bytes.
> blackfin: run core1 from L1 code sram start address in uboot
> init code on core 0
> blackfin: Set correct early debug serial baudrate.
> blackfin: Correct early serial mess output in BYPASS boot mode.
> blackfin: bf609: implement soft switch
> blackfin: Fit u-boot image size into limited nor flash on blackfin.
> blackfin: Enable early print via the generic serial API.
> blackfin: Add memory virtual console to blackfin serial driver.
> blackfin: Uart divisor should be set after their values are generated.
> blackfin: Move blackfin watchdog driver out of the blackfin arch folder.
> blackfin: Move blackfin serial driver out of blackfin arch folder.
> blackfin: Add comments for watchdog event initialization.
> bfin: Move gpio support for bf54x and bf60x into the generic
> driver folder.
>
> README | 1 +
> arch/blackfin/cpu/Makefile | 4 +-
> arch/blackfin/cpu/cpu.c | 32 +-
> arch/blackfin/cpu/gpio.c | 145 +------
> arch/blackfin/cpu/initcode.c | 71 ++--
> arch/blackfin/cpu/start.S | 29 +-
> arch/blackfin/include/asm/clock.h | 78 ++++
> arch/blackfin/include/asm/dma.h | 24 +-
> arch/blackfin/include/asm/gpio.h | 62 +--
> arch/blackfin/include/asm/mach-bf561/BF561_def.h | 2 +
> arch/blackfin/include/asm/mach-bf609/BF609_def.h | 5 +
> arch/blackfin/include/asm/portmux.h | 5 -
> arch/blackfin/{cpu => include/asm}/serial.h | 23 +-
> arch/blackfin/{cpu => include/asm}/serial1.h | 48 +--
> arch/blackfin/{cpu => include/asm}/serial4.h | 27 +-
> arch/blackfin/include/asm/soft_switch.h | 18 +
> arch/blackfin/lib/board.c | 6 +-
> arch/blackfin/lib/clocks.c | 12 +-
> arch/blackfin/lib/string.c | 9 +-
> board/bf609-ezkit/soft_switch.c | 171 ++++++++
> board/bf609-ezkit/soft_switch.h | 80 ++++
> common/Makefile | 1 +
> common/cmd_softswitch.c | 41 ++
> doc/README.watchdog | 3 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/adi_gpio2.c | 440 +++++++++++++++++++++
> drivers/net/bfin_mac.c | 2 -
> drivers/serial/Makefile | 1 +
> .../cpu/serial.c => drivers/serial/serial_bfin.c | 110 ++++--
> drivers/spi/bfin_spi.c | 105 +----
> drivers/watchdog/Makefile | 1 +
> .../cpu/watchdog.c => drivers/watchdog/bfin_wdt.c | 7 +-
> include/configs/bf527-ezkit.h | 12 +-
> include/configs/bf537-stamp.h | 10 +-
> include/configs/bf548-ezkit.h | 25 +-
> include/configs/bf561-ezkit.h | 5 +
> include/configs/bf609-ezkit.h | 10 +
> include/configs/bfin_adi_common.h | 14 +-
> include/watchdog.h | 3 +-
> 39 files changed, 1164 insertions(+), 479 deletions(-)
> create mode 100644 arch/blackfin/include/asm/clock.h
> rename arch/blackfin/{cpu => include/asm}/serial.h (82%)
> rename arch/blackfin/{cpu => include/asm}/serial1.h (94%)
> rename arch/blackfin/{cpu => include/asm}/serial4.h (86%)
> create mode 100644 arch/blackfin/include/asm/soft_switch.h
> create mode 100644 board/bf609-ezkit/soft_switch.c
> create mode 100644 board/bf609-ezkit/soft_switch.h
> create mode 100644 common/cmd_softswitch.c
> create mode 100644 drivers/gpio/adi_gpio2.c
> rename arch/blackfin/cpu/serial.c => drivers/serial/serial_bfin.c (79%)
> rename arch/blackfin/cpu/watchdog.c => drivers/watchdog/bfin_wdt.c (64%)
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130514/0b28aef3/attachment.pgp>
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] Pull request v2: u-boot-blackfin
@ 2014-08-11 2:55 Sonic Zhang
2014-08-12 21:00 ` Tom Rini
0 siblings, 1 reply; 4+ messages in thread
From: Sonic Zhang @ 2014-08-11 2:55 UTC (permalink / raw)
To: u-boot
Hi Tom,
Please pull the following patches for Blackfin from u-boot-blackfin
into your tree.
Thanks
Sonic Zhang
The following changes since commit e76b933e02e1b38e48754c435e9dba1c0deeb3c6:
Prepare v2014.10-rc1 (2014-08-06 09:12:58 -0400)
are available in the git repository at:
git://git.denx.de/u-boot-blackfin.git master
for you to fetch changes up to d54d7eb965e96fc451beaac58cd79efdcf848fd9:
support blackfin board initialization in generic board_f (2014-08-07
15:15:19 +0800)
----------------------------------------------------------------
Aaron Wu (1):
bfin: add register define required by core B on dual core BF609 processor
Scott Jiang (1):
blackfin: spi clock is in sysclk1 domain instead of sysclk0
Sonic Zhang (2):
blackfin: convert blackfin board_f and board_r to use generic
board init functions
support blackfin board initialization in generic board_f
arch/blackfin/config.mk | 3 +
arch/blackfin/cpu/cpu.c | 334 +++++++++++++++--
arch/blackfin/cpu/start.S | 14 +-
arch/blackfin/cpu/u-boot.lds | 4 +-
arch/blackfin/include/asm/clock.h | 2 +-
arch/blackfin/include/asm/config.h | 4 +
arch/blackfin/include/asm/mach-bf609/BF609_def.h | 2 +
arch/blackfin/include/asm/u-boot.h | 3 +
arch/blackfin/lib/Makefile | 7 +-
arch/blackfin/lib/board.c | 443 -----------------------
arch/blackfin/lib/sections.c | 11 +
common/board_f.c | 45 ++-
include/configs/bf506f-ezkit.h | 5 +-
include/configs/bf533-stamp.h | 3 +-
include/configs/bf538f-ezkit.h | 3 +-
include/watchdog.h | 3 +-
16 files changed, 380 insertions(+), 506 deletions(-)
delete mode 100644 arch/blackfin/lib/board.c
create mode 100644 arch/blackfin/lib/sections.c
^ permalink raw reply [flat|nested] 4+ messages in thread
* [U-Boot] Pull request v2: u-boot-blackfin
2014-08-11 2:55 [U-Boot] Pull request v2: u-boot-blackfin Sonic Zhang
@ 2014-08-12 21:00 ` Tom Rini
0 siblings, 0 replies; 4+ messages in thread
From: Tom Rini @ 2014-08-12 21:00 UTC (permalink / raw)
To: u-boot
On Mon, Aug 11, 2014 at 10:55:45AM +0800, Sonic Zhang wrote:
> Hi Tom,
>
> Please pull the following patches for Blackfin from u-boot-blackfin
> into your tree.
>
> Thanks
>
> Sonic Zhang
>
>
> The following changes since commit e76b933e02e1b38e48754c435e9dba1c0deeb3c6:
>
> Prepare v2014.10-rc1 (2014-08-06 09:12:58 -0400)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-blackfin.git master
>
> for you to fetch changes up to d54d7eb965e96fc451beaac58cd79efdcf848fd9:
>
> support blackfin board initialization in generic board_f (2014-08-07
> 15:15:19 +0800)
>
> ----------------------------------------------------------------
> Aaron Wu (1):
> bfin: add register define required by core B on dual core BF609 processor
>
> Scott Jiang (1):
> blackfin: spi clock is in sysclk1 domain instead of sysclk0
>
> Sonic Zhang (2):
> blackfin: convert blackfin board_f and board_r to use generic
> board init functions
> support blackfin board initialization in generic board_f
>
> arch/blackfin/config.mk | 3 +
> arch/blackfin/cpu/cpu.c | 334 +++++++++++++++--
> arch/blackfin/cpu/start.S | 14 +-
> arch/blackfin/cpu/u-boot.lds | 4 +-
> arch/blackfin/include/asm/clock.h | 2 +-
> arch/blackfin/include/asm/config.h | 4 +
> arch/blackfin/include/asm/mach-bf609/BF609_def.h | 2 +
> arch/blackfin/include/asm/u-boot.h | 3 +
> arch/blackfin/lib/Makefile | 7 +-
> arch/blackfin/lib/board.c | 443 -----------------------
> arch/blackfin/lib/sections.c | 11 +
> common/board_f.c | 45 ++-
> include/configs/bf506f-ezkit.h | 5 +-
> include/configs/bf533-stamp.h | 3 +-
> include/configs/bf538f-ezkit.h | 3 +-
> include/watchdog.h | 3 +-
> 16 files changed, 380 insertions(+), 506 deletions(-)
> delete mode 100644 arch/blackfin/lib/board.c
> create mode 100644 arch/blackfin/lib/sections.c
Applied to u-boot/master, thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20140812/32fe0405/attachment.pgp>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2014-08-12 21:00 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-08-11 2:55 [U-Boot] Pull request v2: u-boot-blackfin Sonic Zhang
2014-08-12 21:00 ` Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2013-05-14 6:20 Sonic Zhang
2013-05-14 19:17 ` Tom Rini
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox