[U-Boot] [PATCH v10 00/35] phy: sunxi: Add Allwinner sun4i USB PHY

[Jagan Teki <jagan@amarulasolutions.com>]

This series rework of previous version where it removes legacy
usb phy handling and added phy driver on generic-phy framework.

Current implementation phy driver is unable to get pinctrl, clock
and reset details from DT since the dm code on these will add it future.

Changes for v8, v9, v10:
- rebase on master
- collect Jun Acked-by
- add Linux commit id details for dt-binding patch
- fixed few commit messages

Changes for v7:
- rebase on master

Changes for v6:
- Create private config for passing through driver_data instead
  directly passing musb_config. This make room for adding new
  configs in coming patches.
- memset to pdata in musb-new/sunxi.c

Changes for v5:
- Rework of previous series
- Used driver_data on sunxi.c since dt supported
- tested on bpi-m2-plus, orangepi_pc2/prime, bananapi-m64

Changes for v4:
- Rework of previous series
- Add Allwinner sun4i USB PHY driver
- Drop legacy arch/arm/mach-sunxi/usb_phy.c and related code

Chen-Yu Tsai (1):
  sunxi: clock: Fix OHCI clock gating for H3/H5

Jagan Teki (33):
  usb: sunxi: Simplify ccm reg base code
  musb: sunxi: Add proper macros instead of numericals
  musb: sunxi: Use simple way to fill musb_hdrc pdata
  musb: sunxi: Add fifo config
  sunxi: clock: Fix clock gating for H3/H5/A64
  musb: sunxi: Add OTG device clkgate and reset for H3/H5
  musb: sunxi: Use BIT instead of numerical shift
  musb: sunxi: Add support for H3/H5/A64
  phy: Add Allwinner A64 USB PHY driver
  phy: sun4i-usb: Add id_detect and vbus_detect ops
  phy: sun4i-usb: Add H3/H5 PHY config
  phy: sun4i-usb: Add V3S PHY config
  phy: sun4i-usb: Add A83T USB PHY config
  phy: sun4i-usb: Add A10/A13/A20 PHY config
  phy: sun4i-usb: Add A31 PHY config
  phy: sun4i-usb: Add A33 USB PHY config
  phy: sun4i-usb: Add A23 USB PHY config
  device-tree-bindings: phy: Sync sun4i-usb-phy bindings
  board: sunxi: Use generic-phy for board_usb_cable_connected
  phy: sun4i-usb: Add a sunxi specific function for setting
    squelch-detect
  usb: sunxi: Switch to use generic-phy
  sunxi: Drop legacy usb_phy.c
  arm64: allwinner: a64: bananapi-m64: Sync usb_otg node from Linux
  configs: bananapi-m64: Enable USB OTG peripheral mode
  ARM: dts: sun8i: a83t: Sync usbphy node from Linux
  arm64: allwinner: a64: bananapi-m64: Sync usb host nodes from Linux
  ARM: dts: sun8i-h3: bananapi-m2-plus: Sync usb otg nodes from Linux
  configs: bananapi-m2-plus: Enable USB OTG peripheral mode
  arm64: allwinner: h5: orangepi-pc2: Order nodes in alphabetic
  arm64: allwinner: h5: orangepi-pc2: Sync usb otg nodes from Linux
  configs: orangepi-pc2: Enable USB OTG peripheral mode
  arm64: allwinner: h5: orangepi-prime: Sync usb otg nodes from Linux
  configs: orangepi-prime: Enable USB OTG peripheral mode

Jun Nie (1):
  sunxi: h3: Sync OTG and HCI nodes from Linux DT

 arch/arm/dts/sun50i-a64-bananapi-m64.dts       |  26 ++
 arch/arm/dts/sun50i-h5-orangepi-pc2.dts        |  59 ++-
 arch/arm/dts/sun50i-h5-orangepi-prime.dts      |  13 +
 arch/arm/dts/sun8i-a83t.dtsi                   |  20 +
 arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts     |  13 +
 arch/arm/dts/sun8i-h3.dtsi                     |  32 ++
 arch/arm/include/asm/arch-sunxi/clock_sun6i.h  |  23 +-
 arch/arm/include/asm/arch-sunxi/usb_phy.h      |  20 -
 arch/arm/mach-sunxi/Kconfig                    |   9 +
 arch/arm/mach-sunxi/Makefile                   |   3 -
 arch/arm/mach-sunxi/usb_phy.c                  | 406 -----------------
 board/sunxi/board.c                            |  40 +-
 configs/Sinovoip_BPI_M2_Plus_defconfig         |   1 +
 configs/bananapi_m64_defconfig                 |   1 +
 configs/orangepi_pc2_defconfig                 |   1 +
 configs/orangepi_prime_defconfig               |   1 +
 doc/device-tree-bindings/phy/sun4i-usb-phy.txt |  65 +++
 drivers/Kconfig                                |   2 +
 drivers/Makefile                               |   1 +
 drivers/phy/allwinner/Kconfig                  |  13 +
 drivers/phy/allwinner/Makefile                 |   6 +
 drivers/phy/allwinner/phy-sun4i-usb.c          | 575 +++++++++++++++++++++++++
 drivers/usb/host/ehci-sunxi.c                  |  66 ++-
 drivers/usb/host/ohci-sunxi.c                  |  72 +++-
 drivers/usb/musb-new/musb_core.h               |   4 +
 drivers/usb/musb-new/musb_regs.h               |   3 +-
 drivers/usb/musb-new/musb_uboot.c              |  22 +-
 drivers/usb/musb-new/sunxi.c                   | 228 ++++++++--
 include/phy-sun4i-usb.h                        |  34 ++
 29 files changed, 1191 insertions(+), 568 deletions(-)
 delete mode 100644 arch/arm/include/asm/arch-sunxi/usb_phy.h
 delete mode 100644 arch/arm/mach-sunxi/usb_phy.c
 create mode 100644 doc/device-tree-bindings/phy/sun4i-usb-phy.txt
 create mode 100644 drivers/phy/allwinner/Kconfig
 create mode 100644 drivers/phy/allwinner/Makefile
 create mode 100644 drivers/phy/allwinner/phy-sun4i-usb.c
 create mode 100644 include/phy-sun4i-usb.h

-- 
2.14.3