From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v10 05/35] sunxi: clock: Fix clock gating for H3/H5/A64
Date: Mon, 28 May 2018 16:48:16 +0530 [thread overview]
Message-ID: <20180528111846.14316-6-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20180528111846.14316-1-jagan@amarulasolutions.com>
clock gating bits on a64 are different than H3_H5, so fixed
only required bits on clock_sun6i.h.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
---
arch/arm/include/asm/arch-sunxi/clock_sun6i.h | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
index 27a0da938c..87d82f205c 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h
@@ -270,21 +270,27 @@ struct sunxi_ccm_reg {
#define AXI_GATE_OFFSET_DRAM 0
/* ahb_gate0 offsets */
-#define AHB_GATE_OFFSET_USB_OHCI1 30
-#define AHB_GATE_OFFSET_USB_OHCI0 29
#ifdef CONFIG_MACH_SUNXI_H3_H5
/*
* These are EHCI1 - EHCI3 in the datasheet (EHCI0 is for the OTG) we call
* them 0 - 2 like they were called on older SoCs.
*/
+#define AHB_GATE_OFFSET_USB_OHCI0 28
#define AHB_GATE_OFFSET_USB_EHCI2 27
#define AHB_GATE_OFFSET_USB_EHCI1 26
+#define AHB_GATE_OFFSET_USB_EHCI0 24
+#elif defined(CONFIG_MACH_SUN50I)
+#define AHB_GATE_OFFSET_USB_OHCI0 29
#define AHB_GATE_OFFSET_USB_EHCI0 25
#else
+#define AHB_GATE_OFFSET_USB_OHCI1 30
+#define AHB_GATE_OFFSET_USB_OHCI0 29
#define AHB_GATE_OFFSET_USB_EHCI1 27
#define AHB_GATE_OFFSET_USB_EHCI0 26
#endif
-#ifndef CONFIG_MACH_SUN8I_R40
+#ifdef CONFIG_MACH_SUN50I
+#define AHB_GATE_OFFSET_USB0 23
+#elif !defined(CONFIG_MACH_SUN8I_R40)
#define AHB_GATE_OFFSET_USB0 24
#else
#define AHB_GATE_OFFSET_USB0 25
--
2.14.3
next prev parent reply other threads:[~2018-05-28 11:18 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-28 11:18 [U-Boot] [PATCH v10 00/35] phy: sunxi: Add Allwinner sun4i USB PHY Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 01/35] usb: sunxi: Simplify ccm reg base code Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 02/35] musb: sunxi: Add proper macros instead of numericals Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 03/35] musb: sunxi: Use simple way to fill musb_hdrc pdata Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 04/35] musb: sunxi: Add fifo config Jagan Teki
2018-05-28 11:18 ` Jagan Teki [this message]
2018-05-28 11:18 ` [U-Boot] [PATCH v10 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5 Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 07/35] musb: sunxi: Use BIT instead of numerical shift Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 08/35] sunxi: clock: Fix OHCI clock gating for H3/H5 Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 09/35] musb: sunxi: Add support for H3/H5/A64 Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 10/35] phy: Add Allwinner A64 USB PHY driver Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 11/35] phy: sun4i-usb: Add id_detect and vbus_detect ops Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 12/35] phy: sun4i-usb: Add H3/H5 PHY config Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 13/35] phy: sun4i-usb: Add V3S " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 14/35] phy: sun4i-usb: Add A83T USB " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 15/35] phy: sun4i-usb: Add A10/A13/A20 " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 16/35] phy: sun4i-usb: Add A31 " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 17/35] phy: sun4i-usb: Add A33 USB " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 18/35] phy: sun4i-usb: Add A23 " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 19/35] device-tree-bindings: phy: Sync sun4i-usb-phy bindings Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 20/35] board: sunxi: Use generic-phy for board_usb_cable_connected Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 21/35] phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 22/35] usb: sunxi: Switch to use generic-phy Jagan Teki
2018-06-27 23:09 ` [U-Boot] [linux-sunxi] " Adam Sampson
2018-06-28 0:54 ` Vasily Khoruzhick
2018-06-28 2:08 ` Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 23/35] sunxi: Drop legacy usb_phy.c Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 24/35] sunxi: h3: Sync OTG and HCI nodes from Linux DT Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 25/35] arm64: allwinner: a64: bananapi-m64: Sync usb_otg node from Linux Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 26/35] configs: bananapi-m64: Enable USB OTG peripheral mode Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 27/35] ARM: dts: sun8i: a83t: Sync usbphy node from Linux Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 28/35] arm64: allwinner: a64: bananapi-m64: Sync usb host nodes " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 29/35] ARM: dts: sun8i-h3: bananapi-m2-plus: Sync usb otg " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 30/35] configs: bananapi-m2-plus: Enable USB OTG peripheral mode Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 31/35] arm64: allwinner: h5: orangepi-pc2: Order nodes in alphabetic Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 32/35] arm64: allwinner: h5: orangepi-pc2: Sync usb otg nodes from Linux Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 33/35] configs: orangepi-pc2: Enable USB OTG peripheral mode Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 34/35] arm64: allwinner: h5: orangepi-prime: Sync usb otg nodes from Linux Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 35/35] configs: orangepi-prime: Enable USB OTG peripheral mode Jagan Teki
2018-06-01 16:52 ` [U-Boot] [PATCH v10 00/35] phy: sunxi: Add Allwinner sun4i USB PHY Jagan Teki
2018-06-05 4:54 ` Vasily Khoruzhick
2018-06-05 5:11 ` Vasily Khoruzhick
2018-06-05 5:34 ` Jagan Teki
2018-06-05 5:38 ` Vasily Khoruzhick
2018-06-05 5:47 ` Vasily Khoruzhick
2018-06-05 5:51 ` Jagan Teki
2018-06-05 5:58 ` Vasily Khoruzhick
2018-06-05 6:31 ` Vasily Khoruzhick
2018-06-05 7:02 ` Vasily Khoruzhick
2018-06-05 7:04 ` Jagan Teki
2018-06-06 3:39 ` Vasily Khoruzhick
2018-06-16 18:04 ` Vasily Khoruzhick
2018-06-18 5:19 ` Jagan Teki
2018-06-18 5:48 ` Vasily Khoruzhick
2018-06-18 6:04 ` Jagan Teki
2018-06-18 6:13 ` Vasily Khoruzhick
2018-06-18 16:59 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180528111846.14316-6-jagan@amarulasolutions.com \
--to=jagan@amarulasolutions.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox