public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v10 31/35] arm64: allwinner: h5: orangepi-pc2: Order nodes in alphabetic
Date: Mon, 28 May 2018 16:48:42 +0530	[thread overview]
Message-ID: <20180528111846.14316-32-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20180528111846.14316-1-jagan@amarulasolutions.com>

Order sun50i-h5-orangepi-pc2.dts nodes in alphabetic

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
---
 arch/arm/dts/sun50i-h5-orangepi-pc2.dts | 56 ++++++++++++++++-----------------
 1 file changed, 28 insertions(+), 28 deletions(-)

diff --git a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
index d1c347d2b8..2124043dc8 100644
--- a/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
+++ b/arch/arm/dts/sun50i-h5-orangepi-pc2.dts
@@ -50,6 +50,11 @@
 	model = "OrangePi PC 2";
 	compatible = "xunlong,orangepi-pc-2", "allwinner,sun50i-h5";
 
+	aliases {
+		serial0 = &uart0;
+		ethernet0 = &emac;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -58,11 +63,6 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
-	aliases {
-		serial0 = &uart0;
-		ethernet0 = &emac;
-	};
-
 	soc {
 		reg_vcc3v3: vcc3v3 {
 			compatible = "regulator-fixed";
@@ -73,6 +73,25 @@
 	};
 };
 
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy at 1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
 &mmc0 {
 	compatible = "allwinner,sun50i-h5-mmc",
 		     "allwinner,sun50i-a64-mmc",
@@ -86,35 +105,16 @@
 	status = "okay";
 };
 
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
-
 &ohci1 {
 	status = "okay";
 };
 
-&ehci1 {
-	status = "okay";
-};
-
-&emac {
+&uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-mode = "rgmii";
-	phy-handle = <&ext_rgmii_phy>;
+	pinctrl-0 = <&uart0_pins_a>;
 	status = "okay";
 };
 
-&external_mdio {
-	ext_rgmii_phy: ethernet-phy at 1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-	};
+&usbphy {
+	status = "okay";
 };
-- 
2.14.3

  parent reply	other threads:[~2018-05-28 11:18 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-28 11:18 [U-Boot] [PATCH v10 00/35] phy: sunxi: Add Allwinner sun4i USB PHY Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 01/35] usb: sunxi: Simplify ccm reg base code Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 02/35] musb: sunxi: Add proper macros instead of numericals Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 03/35] musb: sunxi: Use simple way to fill musb_hdrc pdata Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 04/35] musb: sunxi: Add fifo config Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 05/35] sunxi: clock: Fix clock gating for H3/H5/A64 Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5 Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 07/35] musb: sunxi: Use BIT instead of numerical shift Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 08/35] sunxi: clock: Fix OHCI clock gating for H3/H5 Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 09/35] musb: sunxi: Add support for H3/H5/A64 Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 10/35] phy: Add Allwinner A64 USB PHY driver Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 11/35] phy: sun4i-usb: Add id_detect and vbus_detect ops Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 12/35] phy: sun4i-usb: Add H3/H5 PHY config Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 13/35] phy: sun4i-usb: Add V3S " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 14/35] phy: sun4i-usb: Add A83T USB " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 15/35] phy: sun4i-usb: Add A10/A13/A20 " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 16/35] phy: sun4i-usb: Add A31 " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 17/35] phy: sun4i-usb: Add A33 USB " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 18/35] phy: sun4i-usb: Add A23 " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 19/35] device-tree-bindings: phy: Sync sun4i-usb-phy bindings Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 20/35] board: sunxi: Use generic-phy for board_usb_cable_connected Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 21/35] phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 22/35] usb: sunxi: Switch to use generic-phy Jagan Teki
2018-06-27 23:09   ` [U-Boot] [linux-sunxi] " Adam Sampson
2018-06-28  0:54     ` Vasily Khoruzhick
2018-06-28  2:08     ` Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 23/35] sunxi: Drop legacy usb_phy.c Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 24/35] sunxi: h3: Sync OTG and HCI nodes from Linux DT Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 25/35] arm64: allwinner: a64: bananapi-m64: Sync usb_otg node from Linux Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 26/35] configs: bananapi-m64: Enable USB OTG peripheral mode Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 27/35] ARM: dts: sun8i: a83t: Sync usbphy node from Linux Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 28/35] arm64: allwinner: a64: bananapi-m64: Sync usb host nodes " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 29/35] ARM: dts: sun8i-h3: bananapi-m2-plus: Sync usb otg " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 30/35] configs: bananapi-m2-plus: Enable USB OTG peripheral mode Jagan Teki
2018-05-28 11:18 ` Jagan Teki [this message]
2018-05-28 11:18 ` [U-Boot] [PATCH v10 32/35] arm64: allwinner: h5: orangepi-pc2: Sync usb otg nodes from Linux Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 33/35] configs: orangepi-pc2: Enable USB OTG peripheral mode Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 34/35] arm64: allwinner: h5: orangepi-prime: Sync usb otg nodes from Linux Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 35/35] configs: orangepi-prime: Enable USB OTG peripheral mode Jagan Teki
2018-06-01 16:52 ` [U-Boot] [PATCH v10 00/35] phy: sunxi: Add Allwinner sun4i USB PHY Jagan Teki
2018-06-05  4:54   ` Vasily Khoruzhick
2018-06-05  5:11     ` Vasily Khoruzhick
2018-06-05  5:34       ` Jagan Teki
2018-06-05  5:38         ` Vasily Khoruzhick
2018-06-05  5:47           ` Vasily Khoruzhick
2018-06-05  5:51             ` Jagan Teki
2018-06-05  5:58               ` Vasily Khoruzhick
2018-06-05  6:31                 ` Vasily Khoruzhick
2018-06-05  7:02                   ` Vasily Khoruzhick
2018-06-05  7:04                     ` Jagan Teki
2018-06-06  3:39                       ` Vasily Khoruzhick
2018-06-16 18:04                         ` Vasily Khoruzhick
2018-06-18  5:19                           ` Jagan Teki
2018-06-18  5:48                             ` Vasily Khoruzhick
2018-06-18  6:04                               ` Jagan Teki
2018-06-18  6:13                                 ` Vasily Khoruzhick
2018-06-18 16:59                                   ` Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180528111846.14316-32-jagan@amarulasolutions.com \
    --to=jagan@amarulasolutions.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox