From: Marek Vasut <marek.vasut@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 09/13] mmc: tmio: sdhi: Touch SCC only when UHS capable
Date: Wed, 31 Oct 2018 18:16:02 +0100 [thread overview]
Message-ID: <20181031171606.13561-9-marek.vasut+renesas@gmail.com> (raw)
In-Reply-To: <20181031171606.13561-1-marek.vasut+renesas@gmail.com>
Add check to avoid touching the SCC tuning registers in case the IP
doesn't support them or if the support isn't in place yet.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
---
drivers/mmc/renesas-sdhi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/renesas-sdhi.c b/drivers/mmc/renesas-sdhi.c
index 1590f496d7..6b5871a0ae 100644
--- a/drivers/mmc/renesas-sdhi.c
+++ b/drivers/mmc/renesas-sdhi.c
@@ -294,7 +294,8 @@ static int renesas_sdhi_set_ios(struct udevice *dev)
#if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT)
struct tmio_sd_priv *priv = dev_get_priv(dev);
- renesas_sdhi_reset_tuning(priv);
+ if (priv->caps & TMIO_SD_CAP_RCAR_UHS)
+ renesas_sdhi_reset_tuning(priv);
#endif
return ret;
@@ -371,7 +372,7 @@ static int renesas_sdhi_probe(struct udevice *dev)
ret = tmio_sd_probe(dev, quirks);
#if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT)
- if (!ret)
+ if (!ret && (priv->caps & TMIO_SD_CAP_RCAR_UHS))
renesas_sdhi_reset_tuning(priv);
#endif
return ret;
--
2.18.0
next prev parent reply other threads:[~2018-10-31 17:16 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-31 17:15 [U-Boot] [PATCH 01/13] mmc: tmio: Simplify pinmux handling Marek Vasut
2018-10-31 17:15 ` [U-Boot] [PATCH 02/13] mmc: tmio: Switch to clock framework Marek Vasut
2018-11-01 9:38 ` [U-Boot] [PATCH V2 " Marek Vasut
2018-11-01 11:38 ` Masahiro Yamada
2018-11-02 2:19 ` Masahiro Yamada
2018-11-02 14:42 ` Marek Vasut
2018-11-02 2:24 ` Masahiro Yamada
2018-11-02 14:43 ` Marek Vasut
2018-10-31 17:15 ` [U-Boot] [PATCH 03/13] mmc: tmio: Do not set divider to 1 in DDR mode Marek Vasut
2018-11-01 11:39 ` Masahiro Yamada
2018-11-01 12:09 ` Marek Vasut
2018-10-31 17:15 ` [U-Boot] [PATCH 04/13] mmc: tmio: Configure clock before any other IOS Marek Vasut
2018-10-31 17:15 ` [U-Boot] [PATCH 05/13] mmc: tmio: Keep generating clock when clock are enabled Marek Vasut
2018-11-01 11:46 ` Masahiro Yamada
2018-11-01 12:10 ` Marek Vasut
2018-10-31 17:15 ` [U-Boot] [PATCH 06/13] mmc: tmio: Preinitialize regulator to 3.3V Marek Vasut
2018-10-31 17:16 ` [U-Boot] [PATCH 07/13] mmc: tmio: Improve error handling Marek Vasut
2018-11-01 11:43 ` Masahiro Yamada
2018-10-31 17:16 ` [U-Boot] [PATCH 08/13] mmc: tmio: Silence transfer errors when tuning Marek Vasut
2018-11-01 11:42 ` Masahiro Yamada
2018-11-01 12:11 ` Marek Vasut
2018-11-02 3:59 ` Masahiro Yamada
2018-11-02 14:27 ` Marek Vasut
2018-10-31 17:16 ` Marek Vasut [this message]
2018-10-31 17:16 ` [U-Boot] [PATCH 10/13] mmc: tmio: sdhi: Clear HS400 settings when reseting SCC Marek Vasut
2018-10-31 17:16 ` [U-Boot] [PATCH 11/13] mmc: tmio: sdhi: Implement waiting for DAT0 line state Marek Vasut
2018-10-31 17:16 ` [U-Boot] [PATCH 12/13] mmc: tmio: sdhi: Switch CPG settings in UHS modes Marek Vasut
2018-10-31 17:16 ` [U-Boot] [PATCH 13/13] mmc: tmio: sdhi: Merge DTCNTL access into single register write Marek Vasut
2018-11-01 11:38 ` [U-Boot] [PATCH 01/13] mmc: tmio: Simplify pinmux handling Masahiro Yamada
2018-11-01 12:12 ` Marek Vasut
2018-11-02 3:58 ` Masahiro Yamada
2018-11-02 14:20 ` Marek Vasut
2018-11-02 14:35 ` Masahiro Yamada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181031171606.13561-9-marek.vasut+renesas@gmail.com \
--to=marek.vasut@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox