[U-Boot] [PATCH 05/13] mmc: tmio: Keep generating clock when clock are enabled

[Marek Vasut <marek.vasut@gmail.com>]

On 11/01/2018 12:46 PM, Masahiro Yamada wrote:
> On Thu, Nov 1, 2018 at 2:21 AM Marek Vasut <marek.vasut@gmail.com> wrote:
>>
>> The TMIO core has a feature where it can automatically disable clock output
>> when the bus is not in use. While this is useful, it also interferes with
>> switching the bus to 1.8V and other background tasks of the SD/MMC cards,
>> which require clock to be enabled.
>>
>> This patch respects the mmc->clk_disable and only disables the clock when
>> the MMC core requests it. Otherwise the clock are continuously generated
>> on the bus.
>>
>> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
>> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
>> ---
>>  drivers/mmc/tmio-common.c | 10 ++++++++--
>>  1 file changed, 8 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/mmc/tmio-common.c b/drivers/mmc/tmio-common.c
>> index ef06f0aa4b..42eb847edb 100644
>> --- a/drivers/mmc/tmio-common.c
>> +++ b/drivers/mmc/tmio-common.c
>> @@ -603,10 +603,16 @@ static void tmio_sd_set_clk_rate(struct tmio_sd_priv *priv,
>>         tmio_sd_writel(priv, tmp, TMIO_SD_CLKCTL);
>>
>>         tmp &= ~TMIO_SD_CLKCTL_DIV_MASK;
>> -       tmp |= val | TMIO_SD_CLKCTL_OFFEN;
> 
> 
> Sorry, _OFFEN is Socionext-specific extension.

It's documented in renesas docs too.

> I believe moving tmio_sd_set_clk_rate to a platform hook
> will make our life easier.
Are you sure ?

-- 
Best regards,
Marek Vasut