[U-Boot] [PATCH v2 2/5] serial: ns16550: Read reg-io-width from device tree

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

Cache the value of the reg-io-width property for the future use.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/serial/ns16550.c | 1 +
 include/ns16550.h        | 4 +++-
 2 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index f9041aa626..b51b56de9f 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -408,6 +408,7 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
 
 	plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0);
 	plat->reg_shift = dev_read_u32_default(dev, "reg-shift", 0);
+	plat->reg_width = dev_read_u32_default(dev, "reg-io-width", 1);
 
 	err = clk_get_by_index(dev, 0, &clk);
 	if (!err) {
diff --git a/include/ns16550.h b/include/ns16550.h
index 5fcbcd2e74..22b89e4d6d 100644
--- a/include/ns16550.h
+++ b/include/ns16550.h
@@ -49,14 +49,16 @@
  * struct ns16550_platdata - information about a NS16550 port
  *
  * @base:		Base register address
+ * @reg_width:		IO accesses size of registers (in bytes)
  * @reg_shift:		Shift size of registers (0=byte, 1=16bit, 2=32bit...)
  * @clock:		UART base clock speed in Hz
  */
 struct ns16550_platdata {
 	unsigned long base;
+	int reg_width;
 	int reg_shift;
-	int clock;
 	int reg_offset;
+	int clock;
 	u32 fcr;
 };
 
-- 
2.19.1