[U-Boot] [PATCH v2] arm: dts: am33xx: introduce 'am33xx-u-boot.dtsi'

[U-Boot] [PATCH v2] arm: dts: am33xx: introduce 'am33xx-u-boot.dtsi'

[Hannes Schmelzer]

commit fdce9d35dc36 ("arm: dts: am33xx: Sync dts with Linux 4.20.0")
did remove the "u-boot,dm-spl" flag from the 'ocp' bus which was
introduced with
commit 19aa4ac09db9 ("dts: am33xx: add u-boot, dm-spl to ocp bus")

Due to this all boards having CONFIG_SPL_OF_CONTROL enabled are broken
because they cannot bind/probe the boot-media interface during SPL
stage.

This commit introduces the 'am33xx-u-boot.dtsi' which is included with
the auto include mechanism. The am33xx-u-boot-dtsi adds the important
"u-boot,dm-pre-reloc" to the 'ocp bus' (the root bus of almost all
peripherals, at least the bootable ones).

The peripherials (mmc, spi, ...) needed during SPL stage need to be
equipped with the 'u-boot,dm-pre-reloc' in their responsible dts file.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>

---

Changes in v2:
- use u-boot,dm-pre-reloc instead u-boot,dm-spl
- add am33xx-u-boot.dtsi instead modifying the am33xx.dtsi

 arch/arm/dts/am33xx-u-boot.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)
 create mode 100644 arch/arm/dts/am33xx-u-boot.dtsi

diff --git a/arch/arm/dts/am33xx-u-boot.dtsi b/arch/arm/dts/am33xx-u-boot.dtsi
new file mode 100644
index 0000000..78f5e2c
--- /dev/null
+++ b/arch/arm/dts/am33xx-u-boot.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 B&R Industrial Automation GmbH -
+ * https://www.br-automation.com/
+ */
+
+/ {
+	ocp {
+		u-boot,dm-pre-reloc;
+	};
+};
-- 
2.7.4

[U-Boot] [PATCH v2] arm: dts: am33xx: introduce 'am33xx-u-boot.dtsi'

[Felix Brack]

Hi Hannes,

On 06.02.19 12:49, Hannes Schmelzer wrote:
> commit fdce9d35dc36 ("arm: dts: am33xx: Sync dts with Linux 4.20.0")
> did remove the "u-boot,dm-spl" flag from the 'ocp' bus which was
> introduced with
> commit 19aa4ac09db9 ("dts: am33xx: add u-boot, dm-spl to ocp bus")
> 
> Due to this all boards having CONFIG_SPL_OF_CONTROL enabled are broken
> because they cannot bind/probe the boot-media interface during SPL
> stage.
> 
Not all boards were broken, only those not having set that property in
their proper -u-boot.dtsi or dts file (like am335x-pdu001-u-boot.dtsi).

> This commit introduces the 'am33xx-u-boot.dtsi' which is included with
> the auto include mechanism. The am33xx-u-boot-dtsi adds the important
> "u-boot,dm-pre-reloc" to the 'ocp bus' (the root bus of almost all
> peripherals, at least the bootable ones).
> 
If the new am33xx-u-boot.dtsi file gets include automatically then
setting the same property in the board specific dts/dtsi file is
redundant. Hence please remove the property from those files (like from
am335x-pdu001-u-boot.dtsi) and add those modified files to your patch.
Thus we have one single patch fixing this issue. Many thanks!

retards Felix

> The peripherials (mmc, spi, ...) needed during SPL stage need to be
> equipped with the 'u-boot,dm-pre-reloc' in their responsible dts file.
> 
> Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
> 
> ---
> 
> Changes in v2:
> - use u-boot,dm-pre-reloc instead u-boot,dm-spl
> - add am33xx-u-boot.dtsi instead modifying the am33xx.dtsi
> 
>  arch/arm/dts/am33xx-u-boot.dtsi | 11 +++++++++++
>  1 file changed, 11 insertions(+)
>  create mode 100644 arch/arm/dts/am33xx-u-boot.dtsi
> 
> diff --git a/arch/arm/dts/am33xx-u-boot.dtsi b/arch/arm/dts/am33xx-u-boot.dtsi
> new file mode 100644
> index 0000000..78f5e2c
> --- /dev/null
> +++ b/arch/arm/dts/am33xx-u-boot.dtsi
> @@ -0,0 +1,11 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019 B&R Industrial Automation GmbH -
> + * https://www.br-automation.com/
> + */
> +
> +/ {
> +	ocp {
> +		u-boot,dm-pre-reloc;
> +	};
> +};
> 

[U-Boot] [PATCH v2] arm: dts: am33xx: introduce 'am33xx-u-boot.dtsi'

[Hannes Schmelzer]

On 2/7/19 5:47 PM, Felix Brack wrote:
> Hi Hannes,
Hi Felix,
> On 06.02.19 12:49, Hannes Schmelzer wrote:
>> commit fdce9d35dc36 ("arm: dts: am33xx: Sync dts with Linux 4.20.0")
>> did remove the "u-boot,dm-spl" flag from the 'ocp' bus which was
>> introduced with
>> commit 19aa4ac09db9 ("dts: am33xx: add u-boot, dm-spl to ocp bus")
>>
>> Due to this all boards having CONFIG_SPL_OF_CONTROL enabled are broken
>> because they cannot bind/probe the boot-media interface during SPL
>> stage.
>>
> Not all boards were broken, only those not having set that property in
> their proper -u-boot.dtsi or dts file (like am335x-pdu001-u-boot.dtsi).
true.
>> This commit introduces the 'am33xx-u-boot.dtsi' which is included with
>> the auto include mechanism. The am33xx-u-boot-dtsi adds the important
>> "u-boot,dm-pre-reloc" to the 'ocp bus' (the root bus of almost all
>> peripherals, at least the bootable ones).
>>
> If the new am33xx-u-boot.dtsi file gets include automatically then
> setting the same property in the board specific dts/dtsi file is
> redundant. Hence please remove the property from those files (like from
> am335x-pdu001-u-boot.dtsi) and add those modified files to your patch.
> Thus we have one single patch fixing this issue. Many thanks!
>
> retards Felix
Nope.
If i understood the mechanism correctly the mechanism searches
this way:

    <dts>-u-boot.dtsi where <dts> is the base name of the .dts file
    <CONFIG_SYS_SOC>-u-boot.dtsi
    <CONFIG_SYS_CPU>-u-boot.dtsi
    <CONFIG_SYS_VENDOR>-u-boot.dtsi
    u-boot.dtsi

and stops after the first  match.
In your case: *am335x-pdu001*-u-boot.dtsi

Have a look, to: tools/binman/README

So i still think, that my patch is on the right track.

>
>> The peripherials (mmc, spi, ...) needed during SPL stage need to be
>> equipped with the 'u-boot,dm-pre-reloc' in their responsible dts file.
>>
>> Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
>>
>> ---
>>
>> Changes in v2:
>> - use u-boot,dm-pre-reloc instead u-boot,dm-spl
>> - add am33xx-u-boot.dtsi instead modifying the am33xx.dtsi
>>
>>   arch/arm/dts/am33xx-u-boot.dtsi | 11 +++++++++++
>>   1 file changed, 11 insertions(+)
>>   create mode 100644 arch/arm/dts/am33xx-u-boot.dtsi
>>
>> diff --git a/arch/arm/dts/am33xx-u-boot.dtsi b/arch/arm/dts/am33xx-u-boot.dtsi
>> new file mode 100644
>> index 0000000..78f5e2c
>> --- /dev/null
>> +++ b/arch/arm/dts/am33xx-u-boot.dtsi
>> @@ -0,0 +1,11 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright (C) 2019 B&R Industrial Automation GmbH -
>> + * https://www.br-automation.com/
>> + */
>> +
>> +/ {
>> +	ocp {
>> +		u-boot,dm-pre-reloc;
>> +	};
>> +};
>>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot

[U-Boot] [PATCH v2] arm: dts: am33xx: introduce 'am33xx-u-boot.dtsi'

[Felix Brack]

Hi Hannes,

On 07.02.19 18:14, Hannes Schmelzer wrote:
> 
> On 2/7/19 5:47 PM, Felix Brack wrote:
>> Hi Hannes,
> Hi Felix,
>> On 06.02.19 12:49, Hannes Schmelzer wrote:
>>> commit fdce9d35dc36 ("arm: dts: am33xx: Sync dts with Linux 4.20.0")
>>> did remove the "u-boot,dm-spl" flag from the 'ocp' bus which was
>>> introduced with
>>> commit 19aa4ac09db9 ("dts: am33xx: add u-boot, dm-spl to ocp bus")
>>>
>>> Due to this all boards having CONFIG_SPL_OF_CONTROL enabled are broken
>>> because they cannot bind/probe the boot-media interface during SPL
>>> stage.
>>>
>> Not all boards were broken, only those not having set that property in
>> their proper -u-boot.dtsi or dts file (like am335x-pdu001-u-boot.dtsi).
> true.
>>> This commit introduces the 'am33xx-u-boot.dtsi' which is included with
>>> the auto include mechanism. The am33xx-u-boot-dtsi adds the important
>>> "u-boot,dm-pre-reloc" to the 'ocp bus' (the root bus of almost all
>>> peripherals, at least the bootable ones).
>>>
>> If the new am33xx-u-boot.dtsi file gets include automatically then
>> setting the same property in the board specific dts/dtsi file is
>> redundant. Hence please remove the property from those files (like from
>> am335x-pdu001-u-boot.dtsi) and add those modified files to your patch.
>> Thus we have one single patch fixing this issue. Many thanks!
>>
>> retards Felix
> Nope.
> If i understood the mechanism correctly the mechanism searches
> this way:
> 
>    <dts>-u-boot.dtsi where <dts> is the base name of the .dts file
>    <CONFIG_SYS_SOC>-u-boot.dtsi
>    <CONFIG_SYS_CPU>-u-boot.dtsi
>    <CONFIG_SYS_VENDOR>-u-boot.dtsi
>    u-boot.dtsi
> 
> and stops after the first  match.
Agreed, you are absolutely right. I should have remembered that since I
already had some problems with this mechanism ;-).

> In your case: *am335x-pdu001*-u-boot.dtsi
> 
I have decided to put the U-Boot specific properties into the above
mentioned file to make sure I can keep the exact same DTS file in U-Boot
and Linux, which simplifies the synchronization.

> Have a look, to: tools/binman/README
> 
> So i still think, that my patch is on the right track.
> 
>>> The peripherials (mmc, spi, ...) needed during SPL stage need to be
>>> equipped with the 'u-boot,dm-pre-reloc' in their responsible dts file.
>>>
>>> Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
>>>
>>> ---
>>>
>>> Changes in v2:
>>> - use u-boot,dm-pre-reloc instead u-boot,dm-spl
>>> - add am33xx-u-boot.dtsi instead modifying the am33xx.dtsi
>>>
>>>  arch/arm/dts/am33xx-u-boot.dtsi | 11 +++++++++++
>>>  1 file changed, 11 insertions(+)
>>>  create mode 100644 arch/arm/dts/am33xx-u-boot.dtsi
>>>
>>> diff --git a/arch/arm/dts/am33xx-u-boot.dtsi b/arch/arm/dts/am33xx-u-boot.dtsi
>>> new file mode 100644
>>> index 0000000..78f5e2c
>>> --- /dev/null
>>> +++ b/arch/arm/dts/am33xx-u-boot.dtsi
>>> @@ -0,0 +1,11 @@
>>> +// SPDX-License-Identifier: GPL-2.0+
>>> +/*
>>> + * Copyright (C) 2019 B&R Industrial Automation GmbH -
>>> + * https://www.br-automation.com/
>>> + */
>>> +
>>> +/ {
>>> +	ocp {
>>> +		u-boot,dm-pre-reloc;
>>> +	};
>>> +};
>>>
>> _______________________________________________
>> U-Boot mailing list
>> U-Boot at lists.denx.de
>> https://lists.denx.de/listinfo/u-boot
> 

regards Felix

[U-Boot] [PATCH v2] arm: dts: am33xx: introduce 'am33xx-u-boot.dtsi'

[Tom Rini]

On Wed, Feb 06, 2019 at 12:49:50PM +0100, Hannes Schmelzer wrote:

> commit fdce9d35dc36 ("arm: dts: am33xx: Sync dts with Linux 4.20.0")
> did remove the "u-boot,dm-spl" flag from the 'ocp' bus which was
> introduced with
> commit 19aa4ac09db9 ("dts: am33xx: add u-boot, dm-spl to ocp bus")
> 
> Due to this all boards having CONFIG_SPL_OF_CONTROL enabled are broken
> because they cannot bind/probe the boot-media interface during SPL
> stage.
> 
> This commit introduces the 'am33xx-u-boot.dtsi' which is included with
> the auto include mechanism. The am33xx-u-boot-dtsi adds the important
> "u-boot,dm-pre-reloc" to the 'ocp bus' (the root bus of almost all
> peripherals, at least the bootable ones).
> 
> The peripherials (mmc, spi, ...) needed during SPL stage need to be
> equipped with the 'u-boot,dm-pre-reloc' in their responsible dts file.
> 
> Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
> 

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190207/860503b1/attachment.sig>