public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Patrick Delaunay <patrick.delaunay@st.com>
To: u-boot@lists.denx.de
Subject: [PATCH v2 07/11] gpio: stmfx: add function stmfx_read_reg and stmfx_write_reg
Date: Thu, 4 Jun 2020 14:30:29 +0200	[thread overview]
Message-ID: <20200604123033.25499-5-patrick.delaunay@st.com> (raw)
In-Reply-To: <20200604123033.25499-1-patrick.delaunay@st.com>

Add the helper functions stmfx_read_reg() and stmfx_write_reg() to avoid
duplicated code for access to stmfx's register with mask.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
---

Changes in v2:
- NEW: split previous patch [5/5] gpio: stmfx: add set_config ops

 drivers/pinctrl/pinctrl-stmfx.c | 68 +++++++++++++--------------------
 1 file changed, 26 insertions(+), 42 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-stmfx.c b/drivers/pinctrl/pinctrl-stmfx.c
index 657ca2e240..5d15424b84 100644
--- a/drivers/pinctrl/pinctrl-stmfx.c
+++ b/drivers/pinctrl/pinctrl-stmfx.c
@@ -74,43 +74,49 @@ static int stmfx_write(struct udevice *dev, uint offset, unsigned int val)
 	return dm_i2c_reg_write(dev_get_parent(dev), offset, val);
 }
 
-static int stmfx_conf_set_pupd(struct udevice *dev, unsigned int pin, u32 pupd)
+static int stmfx_read_reg(struct udevice *dev, u8 reg_base, uint offset)
 {
-	u8 reg = STMFX_REG_GPIO_PUPD + get_reg(pin);
-	u32 mask = get_mask(pin);
+	u8 reg = reg_base + get_reg(offset);
+	u32 mask = get_mask(offset);
 	int ret;
 
 	ret = stmfx_read(dev, reg);
 	if (ret < 0)
 		return ret;
-	ret = (ret & ~mask) | (pupd ? mask : 0);
 
-	return stmfx_write(dev, reg, ret);
+	return ret < 0 ? ret : !!(ret & mask);
 }
 
-static int stmfx_conf_set_type(struct udevice *dev, unsigned int pin, u32 type)
+static int stmfx_write_reg(struct udevice *dev, u8 reg_base, uint offset,
+			   uint val)
 {
-	u8 reg = STMFX_REG_GPIO_TYPE + get_reg(pin);
-	u32 mask = get_mask(pin);
+	u8 reg = reg_base + get_reg(offset);
+	u32 mask = get_mask(offset);
 	int ret;
 
 	ret = stmfx_read(dev, reg);
 	if (ret < 0)
 		return ret;
-	ret = (ret & ~mask) | (type ? mask : 0);
+	ret = (ret & ~mask) | (val ? mask : 0);
 
 	return stmfx_write(dev, reg, ret);
 }
 
-static int stmfx_gpio_get(struct udevice *dev, unsigned int offset)
+static int stmfx_conf_set_pupd(struct udevice *dev, unsigned int offset,
+			       uint pupd)
 {
-	u32 reg = STMFX_REG_GPIO_STATE + get_reg(offset);
-	u32 mask = get_mask(offset);
-	int ret;
+	return stmfx_write_reg(dev, STMFX_REG_GPIO_PUPD, offset, pupd);
+}
 
-	ret = stmfx_read(dev, reg);
+static int stmfx_conf_set_type(struct udevice *dev, unsigned int offset,
+			       uint type)
+{
+	return stmfx_write_reg(dev, STMFX_REG_GPIO_TYPE, offset, type);
+}
 
-	return ret < 0 ? ret : !!(ret & mask);
+static int stmfx_gpio_get(struct udevice *dev, unsigned int offset)
+{
+	return stmfx_read_reg(dev, STMFX_REG_GPIO_STATE, offset);
 }
 
 static int stmfx_gpio_set(struct udevice *dev, unsigned int offset, int value)
@@ -123,50 +129,28 @@ static int stmfx_gpio_set(struct udevice *dev, unsigned int offset, int value)
 
 static int stmfx_gpio_get_function(struct udevice *dev, unsigned int offset)
 {
-	u32 reg = STMFX_REG_GPIO_DIR + get_reg(offset);
-	u32 mask = get_mask(offset);
-	int ret;
-
-	ret = stmfx_read(dev, reg);
+	int ret = stmfx_read_reg(dev, STMFX_REG_GPIO_DIR, offset);
 
 	if (ret < 0)
 		return ret;
 	/* On stmfx, gpio pins direction is (0)input, (1)output. */
 
-	return ret & mask ? GPIOF_OUTPUT : GPIOF_INPUT;
+	return ret ? GPIOF_OUTPUT : GPIOF_INPUT;
 }
 
 static int stmfx_gpio_direction_input(struct udevice *dev, unsigned int offset)
 {
-	u32 reg = STMFX_REG_GPIO_DIR + get_reg(offset);
-	u32 mask = get_mask(offset);
-	int ret;
-
-	ret = stmfx_read(dev, reg);
-	if (ret < 0)
-		return ret;
-
-	ret &= ~mask;
-
-	return stmfx_write(dev, reg, ret & ~mask);
+	return stmfx_write_reg(dev, STMFX_REG_GPIO_DIR, offset, 0);
 }
 
 static int stmfx_gpio_direction_output(struct udevice *dev,
 				       unsigned int offset, int value)
 {
-	u32 reg = STMFX_REG_GPIO_DIR + get_reg(offset);
-	u32 mask = get_mask(offset);
-	int ret;
-
-	ret = stmfx_gpio_set(dev, offset, value);
-	if (ret < 0)
-		return ret;
-
-	ret = stmfx_read(dev, reg);
+	int ret = stmfx_gpio_set(dev, offset, value);
 	if (ret < 0)
 		return ret;
 
-	return stmfx_write(dev, reg, ret | mask);
+	return stmfx_write_reg(dev, STMFX_REG_GPIO_DIR, offset, 1);
 }
 
 static int stmfx_gpio_probe(struct udevice *dev)
-- 
2.17.1

  parent reply	other threads:[~2020-06-04 12:30 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-04 12:30 [PATCH v2 00/11] stm32mp1: activate gpio hog support and add new pinctrl ops Patrick Delaunay
2020-06-04 12:30 ` [PATCH v2 01/11] configs: stm32mp1: activate CONFIG_GPIO_HOG Patrick Delaunay
2020-07-02  7:41   ` [Uboot-stm32] " Patrice CHOTARD
2020-06-04 12:30 ` [PATCH v2 02/11] board: stm32mp1: update the gpio hog support Patrick Delaunay
2020-07-02  7:42   ` [Uboot-stm32] " Patrice CHOTARD
2020-06-04 12:30 ` [PATCH v2 03/11] gpio: stm32: add ops set_dir_flags Patrick Delaunay
2020-07-02  7:48   ` Patrice CHOTARD
2020-06-04 12:30 ` [PATCH v2 04/11] gpio: stm32: add ops get_dir_flags Patrick Delaunay
2020-07-02  7:51   ` Patrice CHOTARD
2020-06-04 12:30 ` [PATCH v2 05/11] gpio: stmfx: move function to prepare new ops introduction Patrick Delaunay
2020-07-02  7:51   ` Patrice CHOTARD
2020-06-04 12:30 ` [PATCH v2 06/11] gpio: stmfx: rename function used to change pin configuration Patrick Delaunay
2020-07-02  7:51   ` Patrice CHOTARD
2020-06-04 12:30 ` Patrick Delaunay [this message]
2020-07-02  7:56   ` [PATCH v2 07/11] gpio: stmfx: add function stmfx_read_reg and stmfx_write_reg Patrice CHOTARD
2020-06-04 12:30 ` [PATCH v2 08/11] gpio: stmfx: add ops set_dir_flag Patrick Delaunay
2020-07-02  7:58   ` Patrice CHOTARD
2020-06-04 12:30 ` [PATCH v2 09/11] gpio: stmfx: add ops get_dir_flags Patrick Delaunay
2020-07-02  7:58   ` Patrice CHOTARD
2020-06-04 12:30 ` [PATCH v2 10/11] pinctrl: stmfx: add information on pin configuration Patrick Delaunay
2020-07-02  7:59   ` Patrice CHOTARD
2020-06-04 12:30 ` [PATCH v2 11/11] pinctrl: stm32: " Patrick Delaunay
2020-07-02  8:02   ` Patrice CHOTARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200604123033.25499-5-patrick.delaunay@st.com \
    --to=patrick.delaunay@st.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox