From: Andre Przywara <andre.przywara@arm.com>
To: u-boot@lists.denx.de
Subject: [PATCH 3/7] net: smc911x: Properly handle EEPROM MAC address
Date: Thu, 11 Jun 2020 12:03:17 +0100 [thread overview]
Message-ID: <20200611110321.9574-4-andre.przywara@arm.com> (raw)
In-Reply-To: <20200611110321.9574-1-andre.przywara@arm.com>
When compiled as a DM_ETH driver, the scm911x driver was reading the MAC
address from the optional EEPROM storage, but failed to copy this to the
platdata struct. Since it was also missing a definition of the
read_rom_hwaddr() function, the generic Ethernet code was dismissing
this MAC address, falling back to a random address or denying to start
at all.
Add an implementation of .read_rom_hwaddr, and refactor the function
reading the ROM address to be called by all interested parties.
This fixes MAC address issues when using the driver in DM_ETH "mode".
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
drivers/net/smc911x.c | 60 ++++++++++++++++++++++++++-----------------
1 file changed, 36 insertions(+), 24 deletions(-)
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 9d2790e561..053ff9f4ff 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -187,6 +187,26 @@ static void smc911x_handle_mac_address(struct smc911x_priv *priv)
printf(DRIVERNAME ": MAC %pM\n", m);
}
+static bool smc911x_read_mac_address(struct smc911x_priv *priv)
+{
+ u32 addrh, addrl;
+
+ /* address is obtained from optional eeprom */
+ addrh = smc911x_get_mac_csr(priv, ADDRH);
+ addrl = smc911x_get_mac_csr(priv, ADDRL);
+ if (addrl == 0xffffffff && addrh == 0x0000ffff)
+ return false;
+
+ priv->enetaddr[0] = addrl;
+ priv->enetaddr[1] = addrl >> 8;
+ priv->enetaddr[2] = addrl >> 16;
+ priv->enetaddr[3] = addrl >> 24;
+ priv->enetaddr[4] = addrh;
+ priv->enetaddr[5] = addrh >> 8;
+
+ return true;
+}
+
static int smc911x_eth_phy_read(struct smc911x_priv *priv,
u8 phy, u8 reg, u16 *val)
{
@@ -471,7 +491,6 @@ static int smc911x_recv(struct eth_device *dev)
int smc911x_initialize(u8 dev_num, int base_addr)
{
- unsigned long addrl, addrh;
struct smc911x_priv *priv;
int ret;
@@ -489,18 +508,8 @@ int smc911x_initialize(u8 dev_num, int base_addr)
goto err_detect;
}
- addrh = smc911x_get_mac_csr(priv, ADDRH);
- addrl = smc911x_get_mac_csr(priv, ADDRL);
- if (!(addrl == 0xffffffff && addrh == 0x0000ffff)) {
- /* address is obtained from optional eeprom */
- priv->enetaddr[0] = addrl;
- priv->enetaddr[1] = addrl >> 8;
- priv->enetaddr[2] = addrl >> 16;
- priv->enetaddr[3] = addrl >> 24;
- priv->enetaddr[4] = addrh;
- priv->enetaddr[5] = addrh >> 8;
+ if (smc911x_read_mac_address(priv))
memcpy(priv->dev.enetaddr, priv->enetaddr, 6);
- }
priv->dev.init = smc911x_init;
priv->dev.halt = smc911x_halt;
@@ -565,6 +574,19 @@ static int smc911x_recv(struct udevice *dev, int flags, uchar **packetp)
return ret ? ret : -EAGAIN;
}
+static int smc911x_read_rom_hwaddr(struct udevice *dev)
+{
+ struct smc911x_priv *priv = dev_get_priv(dev);
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+
+ if (!smc911x_read_mac_address(priv))
+ return -ENODEV;
+
+ memcpy(pdata->enetaddr, priv->enetaddr, sizeof(pdata->enetaddr));
+
+ return 0;
+}
+
static int smc911x_bind(struct udevice *dev)
{
return device_set_name(dev, dev->name);
@@ -573,7 +595,6 @@ static int smc911x_bind(struct udevice *dev)
static int smc911x_probe(struct udevice *dev)
{
struct smc911x_priv *priv = dev_get_priv(dev);
- unsigned long addrh, addrl;
int ret;
/* Try to detect chip. Will fail if not present. */
@@ -581,17 +602,7 @@ static int smc911x_probe(struct udevice *dev)
if (ret)
return ret;
- addrh = smc911x_get_mac_csr(priv, ADDRH);
- addrl = smc911x_get_mac_csr(priv, ADDRL);
- if (!(addrl == 0xffffffff && addrh == 0x0000ffff)) {
- /* address is obtained from optional eeprom */
- priv->enetaddr[0] = addrl;
- priv->enetaddr[1] = addrl >> 8;
- priv->enetaddr[2] = addrl >> 16;
- priv->enetaddr[3] = addrl >> 24;
- priv->enetaddr[4] = addrh;
- priv->enetaddr[5] = addrh >> 8;
- }
+ smc911x_read_rom_hwaddr(dev);
return 0;
}
@@ -612,6 +623,7 @@ static const struct eth_ops smc911x_ops = {
.send = smc911x_send,
.recv = smc911x_recv,
.stop = smc911x_stop,
+ .read_rom_hwaddr = smc911x_read_rom_hwaddr,
};
static const struct udevice_id smc911x_ids[] = {
--
2.17.5
next prev parent reply other threads:[~2020-06-11 11:03 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-11 11:03 [PATCH 0/7] arm: Juno board updates and PCIe/SATA enablement Andre Przywara
2020-06-11 11:03 ` [PATCH 1/7] arm: vexpress64: Fix counter frequency Andre Przywara
2020-06-20 20:22 ` Linus Walleij
2020-07-08 3:04 ` Tom Rini
2020-06-11 11:03 ` [PATCH 2/7] net: dm: Remove warning about EEPROM provided MAC address Andre Przywara
2020-06-11 11:09 ` Ramon Fried
2020-06-20 20:23 ` Linus Walleij
2020-07-08 3:04 ` Tom Rini
2020-06-11 11:03 ` Andre Przywara [this message]
2020-06-11 11:10 ` [PATCH 3/7] net: smc911x: Properly handle EEPROM " Ramon Fried
2020-06-20 20:25 ` Linus Walleij
2020-07-08 3:04 ` Tom Rini
2020-06-11 11:03 ` [PATCH 4/7] arm: juno: Enable DM_ETH Andre Przywara
2020-06-20 20:26 ` Linus Walleij
2020-07-08 3:04 ` Tom Rini
2020-06-11 11:03 ` [PATCH 5/7] sata_sil: Enable DM_PCI operation Andre Przywara
2020-06-20 20:27 ` Linus Walleij
2020-07-08 3:04 ` Tom Rini
2020-06-11 11:03 ` [PATCH 6/7] arm: juno: Enable PCI Andre Przywara
2020-06-20 20:28 ` Linus Walleij
2020-07-08 3:05 ` Tom Rini
2020-06-11 11:03 ` [PATCH 7/7] arm: juno: Enable SATA controller Andre Przywara
2020-06-20 20:28 ` Linus Walleij
2020-07-08 3:05 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200611110321.9574-4-andre.przywara@arm.com \
--to=andre.przywara@arm.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox