[PATCH v1 14/50] mips: octeon: Add cvmx-l2c-defs.h header file

[Stefan Roese <sr@denx.de>]

From: Aaron Williams <awilliams@marvell.com>

Import cvmx-l2c-defs.h header file from 2013 U-Boot. It will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.

Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
---

 .../mach-octeon/include/mach/cvmx-l2c-defs.h  | 172 ++++++++++++++++++
 1 file changed, 172 insertions(+)
 create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-l2c-defs.h

diff --git a/arch/mips/mach-octeon/include/mach/cvmx-l2c-defs.h b/arch/mips/mach-octeon/include/mach/cvmx-l2c-defs.h
new file mode 100644
index 0000000000..7fddcd6dfb
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-l2c-defs.h
@@ -0,0 +1,172 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#ifndef __CVMX_L2C_DEFS_H_
+#define __CVMX_L2C_DEFS_H_
+
+#define CVMX_L2C_CFG 0x0001180080000000ull
+#define CVMX_L2C_CTL 0x0001180080800000ull
+
+/*
+ * Mapping is done starting from 0x11800.80000000
+ * Use _REL for relative mapping
+ */
+#define CVMX_L2C_CTL_REL	 0x00800000
+#define CVMX_L2C_BIG_CTL_REL	 0x00800030
+#define CVMX_L2C_TADX_INT_REL(i) (0x00a00028 + (((i) & 7) * 0x40000))
+#define CVMX_L2C_MCIX_INT_REL(i) (0x00c00028 + (((i) & 3) * 0x40000))
+
+/**
+ * cvmx_l2c_cfg
+ *
+ * Specify the RSL base addresses for the block
+ *
+ *                  L2C_CFG = L2C Configuration
+ *
+ * Description:
+ */
+union cvmx_l2c_cfg {
+	u64 u64;
+	struct cvmx_l2c_cfg_s {
+		u64 reserved_20_63 : 44;
+		u64 bstrun : 1;
+		u64 lbist : 1;
+		u64 xor_bank : 1;
+		u64 dpres1 : 1;
+		u64 dpres0 : 1;
+		u64 dfill_dis : 1;
+		u64 fpexp : 4;
+		u64 fpempty : 1;
+		u64 fpen : 1;
+		u64 idxalias : 1;
+		u64 mwf_crd : 4;
+		u64 rsp_arb_mode : 1;
+		u64 rfb_arb_mode : 1;
+		u64 lrf_arb_mode : 1;
+	} s;
+};
+
+/**
+ * cvmx_l2c_ctl
+ *
+ * L2C_CTL = L2C Control
+ *
+ *
+ * Notes:
+ * (1) If MAXVAB is != 0, VAB_THRESH should be less than MAXVAB.
+ *
+ * (2) L2DFDBE and L2DFSBE allows software to generate L2DSBE, L2DDBE, VBFSBE,
+ * and VBFDBE errors for the purposes of testing error handling code.  When
+ * one (or both) of these bits are set a PL2 which misses in the L2 will fill
+ * with the appropriate error in the first 2 OWs of the fill. Software can
+ * determine which OW pair gets the error by choosing the desired fill order
+ * (address<6:5>).  A PL2 which hits in the L2 will not inject any errors.
+ * Therefore sending a WBIL2 prior to the PL2 is recommended to make a miss
+ * likely (if multiple processors are involved software must be careful to be
+ * sure no other processor or IO device can bring the block into the L2).
+ *
+ * To generate a VBFSBE or VBFDBE, software must first get the cache block
+ * into the cache with an error using a PL2 which misses the L2.  Then a
+ * store partial to a portion of the cache block without the error must
+ * change the block to dirty.  Then, a subsequent WBL2/WBIL2/victim will
+ * trigger the VBFSBE/VBFDBE error.
+ */
+union cvmx_l2c_ctl {
+	u64 u64;
+	struct cvmx_l2c_ctl_s {
+		u64 reserved_29_63 : 35;
+		u64 rdf_fast : 1;
+		u64 disstgl2i : 1;
+		u64 l2dfsbe : 1;
+		u64 l2dfdbe : 1;
+		u64 discclk : 1;
+		u64 maxvab : 4;
+		u64 maxlfb : 4;
+		u64 rsp_arb_mode : 1;
+		u64 xmc_arb_mode : 1;
+		u64 reserved_2_13 : 12;
+		u64 disecc : 1;
+		u64 disidxalias : 1;
+	} s;
+
+	struct cvmx_l2c_ctl_cn73xx {
+		u64 reserved_32_63 : 32;
+		u64 ocla_qos : 3;
+		u64 reserved_28_28 : 1;
+		u64 disstgl2i : 1;
+		u64 reserved_25_26 : 2;
+		u64 discclk : 1;
+		u64 reserved_16_23 : 8;
+		u64 rsp_arb_mode : 1;
+		u64 xmc_arb_mode : 1;
+		u64 rdf_cnt : 8;
+		u64 reserved_4_5 : 2;
+		u64 disldwb : 1;
+		u64 dissblkdty : 1;
+		u64 disecc : 1;
+		u64 disidxalias : 1;
+	} cn73xx;
+
+	struct cvmx_l2c_ctl_cn73xx cn78xx;
+};
+
+/**
+ * cvmx_l2c_big_ctl
+ *
+ * L2C_BIG_CTL = L2C Big memory control register
+ *
+ *
+ * Notes:
+ * (1) BIGRD interrupts can occur during normal operation as the PP's are
+ * allowed to prefetch to non-existent memory locations.  Therefore,
+ * BIGRD is for informational purposes only.
+ *
+ * (2) When HOLEWR/BIGWR blocks a store L2C_VER_ID, L2C_VER_PP, L2C_VER_IOB,
+ * and L2C_VER_MSC will be loaded just like a store which is blocked by VRTWR.
+ * Additionally, L2C_ERR_XMC will be loaded.
+ */
+union cvmx_l2c_big_ctl {
+	u64 u64;
+	struct cvmx_l2c_big_ctl_s {
+		u64 reserved_8_63 : 56;
+		u64 maxdram : 4;
+		u64 reserved_0_3 : 4;
+	} s;
+	struct cvmx_l2c_big_ctl_cn61xx {
+		u64 reserved_8_63 : 56;
+		u64 maxdram : 4;
+		u64 reserved_1_3 : 3;
+		u64 disable : 1;
+	} cn61xx;
+	struct cvmx_l2c_big_ctl_cn61xx cn63xx;
+	struct cvmx_l2c_big_ctl_cn61xx cn66xx;
+	struct cvmx_l2c_big_ctl_cn61xx cn68xx;
+	struct cvmx_l2c_big_ctl_cn61xx cn68xxp1;
+	struct cvmx_l2c_big_ctl_cn70xx {
+		u64 reserved_8_63 : 56;
+		u64 maxdram : 4;
+		u64 reserved_1_3 : 3;
+		u64 disbig : 1;
+	} cn70xx;
+	struct cvmx_l2c_big_ctl_cn70xx cn70xxp1;
+	struct cvmx_l2c_big_ctl_cn70xx cn73xx;
+	struct cvmx_l2c_big_ctl_cn70xx cn78xx;
+	struct cvmx_l2c_big_ctl_cn70xx cn78xxp1;
+	struct cvmx_l2c_big_ctl_cn61xx cnf71xx;
+	struct cvmx_l2c_big_ctl_cn70xx cnf75xx;
+};
+
+struct rlevel_byte_data {
+	int delay;
+	int loop_total;
+	int loop_count;
+	int best;
+	u64 bm;
+	int bmerrs;
+	int sqerrs;
+	int bestsq;
+};
+
+#endif
-- 
2.29.2