From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [PATCH v1 31/50] mips: octeon: Add cvmx-sriox-defs.h header file
Date: Fri, 11 Dec 2020 17:05:53 +0100 [thread overview]
Message-ID: <20201211160612.1498780-32-sr@denx.de> (raw)
In-Reply-To: <20201211160612.1498780-1-sr@denx.de>
From: Aaron Williams <awilliams@marvell.com>
Import cvmx-sriox-defs.h header file from 2013 U-Boot. It will be used
by the later added drivers to support PCIe and networking on the MIPS
Octeon II / III platforms.
Signed-off-by: Aaron Williams <awilliams@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
---
.../include/mach/cvmx-sriox-defs.h | 44 +++++++++++++++++++
1 file changed, 44 insertions(+)
create mode 100644 arch/mips/mach-octeon/include/mach/cvmx-sriox-defs.h
diff --git a/arch/mips/mach-octeon/include/mach/cvmx-sriox-defs.h b/arch/mips/mach-octeon/include/mach/cvmx-sriox-defs.h
new file mode 100644
index 0000000000..ac988609a1
--- /dev/null
+++ b/arch/mips/mach-octeon/include/mach/cvmx-sriox-defs.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+#ifndef __CVMX_SRIOX_DEFS_H__
+#define __CVMX_SRIOX_DEFS_H__
+
+#define CVMX_SRIOX_STATUS_REG(offset) (0x00011800C8000100ull + ((offset) & 3) * 0x1000000ull)
+
+/**
+ * cvmx_srio#_status_reg
+ *
+ * The SRIO field displays if the port has been configured for SRIO operation. This register
+ * can be read regardless of whether the SRIO is selected or being reset. Although some other
+ * registers can be accessed while the ACCESS bit is zero (see individual registers for details),
+ * the majority of SRIO registers and all the SRIOMAINT registers can be used only when the
+ * ACCESS bit is asserted.
+ *
+ * This register is reset by the coprocessor-clock reset.
+ */
+union cvmx_sriox_status_reg {
+ u64 u64;
+ struct cvmx_sriox_status_reg_s {
+ u64 reserved_9_63 : 55;
+ u64 host : 1;
+ u64 spd : 4;
+ u64 run_type : 2;
+ u64 access : 1;
+ u64 srio : 1;
+ } s;
+ struct cvmx_sriox_status_reg_cn63xx {
+ u64 reserved_2_63 : 62;
+ u64 access : 1;
+ u64 srio : 1;
+ } cn63xx;
+ struct cvmx_sriox_status_reg_cn63xx cn63xxp1;
+ struct cvmx_sriox_status_reg_cn63xx cn66xx;
+ struct cvmx_sriox_status_reg_s cnf75xx;
+};
+
+typedef union cvmx_sriox_status_reg cvmx_sriox_status_reg_t;
+
+#endif
--
2.29.2
next prev parent reply other threads:[~2020-12-11 16:05 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-11 16:05 [PATCH v1 00/50] mips: octeon: Add serdes and device helper support incl. DM PCIe driver Stefan Roese
2020-12-11 16:05 ` [PATCH v1 01/50] mips: global_data.h: Add Octeon specific data to arch_global_data struct Stefan Roese
2020-12-11 16:05 ` [PATCH v1 02/50] mips: octeon: Add misc cvmx-helper header files Stefan Roese
2020-12-11 16:05 ` [PATCH v1 03/50] mips: octeon: Add cvmx-agl-defs.h header file Stefan Roese
2020-12-11 16:05 ` [PATCH v1 04/50] mips: octeon: Add cvmx-asxx-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 05/50] mips: octeon: Add cvmx-bgxx-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 06/50] mips: octeon: Add cvmx-ciu-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 07/50] mips: octeon: Add cvmx-dbg-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 08/50] mips: octeon: Add cvmx-dpi-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 09/50] mips: octeon: Add cvmx-dtx-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 10/50] mips: octeon: Add cvmx-fpa-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 11/50] mips: octeon: Add cvmx-gmxx-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 12/50] mips: octeon: Add cvmx-gserx-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 13/50] mips: octeon: Add cvmx-ipd-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 14/50] mips: octeon: Add cvmx-l2c-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 15/50] mips: octeon: Add cvmx-mio-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 16/50] mips: octeon: Add cvmx-npi-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 17/50] mips: octeon: Add cvmx-pcieepx-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 18/50] mips: octeon: Add cvmx-pciercx-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 19/50] mips: octeon: Add cvmx-pcsx-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 20/50] mips: octeon: Add cvmx-pemx-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 21/50] mips: octeon: Add cvmx-pepx-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 22/50] mips: octeon: Add cvmx-pip-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 23/50] mips: octeon: Add cvmx-pki-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 24/50] mips: octeon: Add cvmx-pko-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 25/50] mips: octeon: Add cvmx-pow-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 26/50] mips: octeon: Add cvmx-rst-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 27/50] mips: octeon: Add cvmx-sata-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 28/50] mips: octeon: Add cvmx-sli-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 29/50] mips: octeon: Add cvmx-smix-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 30/50] mips: octeon: Add cvmx-sriomaintx-defs.h " Stefan Roese
2020-12-11 16:05 ` Stefan Roese [this message]
2020-12-11 16:05 ` [PATCH v1 32/50] mips: octeon: Add cvmx-sso-defs.h " Stefan Roese
2020-12-11 16:05 ` [PATCH v1 33/50] mips: octeon: Add misc remaining header files Stefan Roese
2020-12-11 16:05 ` [PATCH v1 34/50] mips: octeon: Misc changes required because of the newly added headers Stefan Roese
2020-12-11 16:05 ` [PATCH v1 35/50] mips: octeon: Move cvmx-lmcx-defs.h from mach/cvmx to mach Stefan Roese
2020-12-11 16:05 ` [PATCH v1 36/50] mips: octeon: Add cvmx-helper-cfg.c Stefan Roese
2020-12-11 16:05 ` [PATCH v1 37/50] mips: octeon: Add cvmx-helper-fdt.c Stefan Roese
2020-12-11 16:06 ` [PATCH v1 38/50] mips: octeon: Add cvmx-helper-jtag.c Stefan Roese
2020-12-11 16:06 ` [PATCH v1 39/50] mips: octeon: Add cvmx-helper-util.c Stefan Roese
2020-12-11 16:06 ` [PATCH v1 40/50] mips: octeon: Add cvmx-helper.c Stefan Roese
2020-12-11 16:06 ` [PATCH v1 41/50] mips: octeon: Add cvmx-pcie.c Stefan Roese
2020-12-11 16:06 ` [PATCH v1 42/50] mips: octeon: Add cvmx-qlm.c Stefan Roese
2020-12-11 16:06 ` [PATCH v1 43/50] mips: octeon: Add octeon_fdt.c Stefan Roese
2020-12-11 16:06 ` [PATCH v1 44/50] mips: octeon: Add octeon_qlm.c Stefan Roese
2020-12-11 16:06 ` [PATCH v1 45/50] mips: octeon: Makefile: Enable building of the newly added C files Stefan Roese
2020-12-11 16:06 ` [PATCH v1 46/50] mips: octeon: Kconfig: Enable CONFIG_SYS_PCI_64BIT Stefan Roese
2020-12-11 16:06 ` [PATCH v1 47/50] mips: octeon: mrvl, cn73xx.dtsi: Add PCIe controller DT node Stefan Roese
2020-12-11 16:06 ` [PATCH v1 48/50] mips: octeon: octeon_ebb7304: Add board specific QLM init code Stefan Roese
2020-12-11 16:06 ` [PATCH v1 49/50] mips: octeon: Add Octeon PCIe host controller driver Stefan Roese
2021-04-07 6:43 ` [PATCH v2 " Stefan Roese
2020-12-11 16:06 ` [PATCH v1 50/50] mips: octeon: octeon_ebb7304_defconfig: Enable Octeon PCIe and E1000 Stefan Roese
2021-04-23 3:56 ` [PATCH v2 33/50] mips: octeon: Add misc remaining header files Stefan Roese
2021-04-23 16:38 ` Daniel Schwierzeck
2021-04-23 17:57 ` Stefan Roese
2021-04-23 17:56 ` [PATCH v3 " Stefan Roese
2021-04-24 22:49 ` [PATCH v1 00/50] mips: octeon: Add serdes and device helper support incl. DM PCIe driver Daniel Schwierzeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201211160612.1498780-32-sr@denx.de \
--to=sr@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox