[PATCH V2] spi: Update speed/mode on change

[Tom Rini <trini@konsulko.com>]

On Wed, Mar 31, 2021 at 03:26:27PM -0400, Tom Rini wrote:
> On Wed, Mar 31, 2021 at 09:18:28PM +0200, Marek Vasut wrote:
> > On 3/29/21 4:40 AM, Marek Vasut wrote:
> > > On 3/29/21 4:09 AM, Marek Vasut wrote:
> > > > On 3/29/21 3:59 AM, Tom Rini wrote:
> > > > > On Mon, Mar 29, 2021 at 03:32:51AM +0200, Marek Vasut wrote:
> > > > > > On 3/28/21 11:30 PM, Tom Rini wrote:
> > > > > > > On Fri, Feb 26, 2021 at 03:21:24PM +0100, Marek Vasut wrote:
> > > > > > > 
> > > > > > > > The spi_get_bus_and_cs() may be called on the same bus and chipselect
> > > > > > > > with different frequency or mode. This is valid usecase, but the code
> > > > > > > > fails to notify the controller of such a configuration change. Call
> > > > > > > > spi_set_speed_mode() in case bus frequency or bus mode changed to let
> > > > > > > > the controller update the configuration.
> > > > > > > > 
> > > > > > > > The problem can easily be triggered using the sspi command:
> > > > > > > > => sspi 0:0 at 1000
> > > > > > > > => sspi 0:0 at 2000
> > > > > > > > Without this patch, both transfers happen at 1000
> > > > > > > > Hz. With this patch,
> > > > > > > > the later transfer happens correctly at 2000 Hz.
> > > > > > > > 
> > > > > > > > Signed-off-by: Marek Vasut <marex@denx.de>
> > > > > > > > Cc: Jagan Teki <jagan@amarulasolutions.com>
> > > > > > > > Cc: Patrick Delaunay <patrick.delaunay@st.com>
> > > > > > > 
> > > > > > > So, very reliably I can make:
> > > > > > > https://source.denx.de/u-boot/u-boot/-/jobs/245517
> > > > > > > happen locally as well building with clang.? It's not
> > > > > > > obvious to me why
> > > > > > > the test now fails however.
> > > > > > 
> > > > > > Can you please be more specific / clear ? I have no idea what those 300
> > > > > > lines of cryptic output mean, nor what are you trying to say
> > > > > > by the above,
> > > > > > sorry.
> > > > > 
> > > > > If you build with clang, for sandbox, and run the tests, U-Boot crashes
> > > > > in the unit tests that you start with "ut dm".
> > > > 
> > > > And that is related to this patch somehow ? How ?
> > > 
> > > ... after further discussion off-list to get a better test case
> > > description ...
> > > 
> > > It seems the problem is in sound_beep() and it is unrelated to this
> > > patch, as the same problem happens with / without this patch being
> > > applied, on:
> > > 
> > > a7d3ac61482 ("Merge branch '2021-03-28-assorted-bugfixes'")
> > > 
> > > $ clang --version
> > > Debian clang version 11.0.1-2
> > > ...
> > > $ make CC=clang HOSTCC=clang sandbox_defconfig
> > > $ make CC=clang HOSTCC=clang
> > > $ gdb --args ./u-boot -d arch/sandbox/dts/test.dtb
> > > => ut dm
> > > ...
> > > Program received signal SIGSEGV, Segmentation fault.
> > > dlfree (mem=<optimized out>, mem at entry=0x15c19c50) at
> > > common/dlmalloc.c:1623
> > > 1623????? if (!(inuse_bit_at_offset(next, nextsz)))?? /* consolidate
> > > forward */
> > > (gdb) bt
> > > #0? dlfree (mem=<optimized out>, mem at entry=0x15c19c50) at
> > > common/dlmalloc.c:1623
> > > #1? 0x00000000004759e3 in sound_beep (dev=0x15c05580, msecs=<optimized
> > > out>, frequency_hz=100)
> > >  ?? at drivers/sound/sound-uclass.c:118
> > 
> > Tom, any further comments ? It seems your claim that this bugfix is causing
> > problems with clang is not correct, so I think it should still be applied to
> > v2021.04 , unless you can provide more details about the clang problem ?
> 
> There's at least a few funny things going on.  Yes, apparently outside
> of CI building sandbox with clang and running the tests manually crashes
> in sound, before it gets to the SPI tests.  Except when it crashes on
> the SPI tests instead, which I did get to happen once.  So there's some
> sort of use-after-free or similar bug around here somewhere, similar to
> how we can't use the -fstack-protector patch as it exposes other real
> problems that need to be fixed first.
> 
> So, I'll see if with a new tag and a few other changes having been made
> we once again get to the point where your patch doesn't trigger this
> issue.  But since it's also not a regression fix, if no one can figure
> out what to do about fixing what clang shows us, then it can wait for
> v2021.07.

Nope, still gets things to blow up:
https://source.denx.de/u-boot/u-boot/-/jobs/246848

and yes, it would be nice if when the reason a pytest fails is that
U-Boot crashed, it would say something more clear than "OSError: [Errno
5] Input/output error" and you have to know that means U-Boot died.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210331/70292369/attachment.sig>