[PATCH V2] spi: Update speed/mode on change

[Tom Rini <trini@konsulko.com>]

On Mon, Mar 29, 2021 at 03:32:51AM +0200, Marek Vasut wrote:
> On 3/28/21 11:30 PM, Tom Rini wrote:
> > On Fri, Feb 26, 2021 at 03:21:24PM +0100, Marek Vasut wrote:
> > 
> > > The spi_get_bus_and_cs() may be called on the same bus and chipselect
> > > with different frequency or mode. This is valid usecase, but the code
> > > fails to notify the controller of such a configuration change. Call
> > > spi_set_speed_mode() in case bus frequency or bus mode changed to let
> > > the controller update the configuration.
> > > 
> > > The problem can easily be triggered using the sspi command:
> > > => sspi 0:0 at 1000
> > > => sspi 0:0 at 2000
> > > Without this patch, both transfers happen at 1000 Hz. With this patch,
> > > the later transfer happens correctly at 2000 Hz.
> > > 
> > > Signed-off-by: Marek Vasut <marex@denx.de>
> > > Cc: Jagan Teki <jagan@amarulasolutions.com>
> > > Cc: Patrick Delaunay <patrick.delaunay@st.com>
> > 
> > So, very reliably I can make:
> > https://source.denx.de/u-boot/u-boot/-/jobs/245517
> > happen locally as well building with clang.  It's not obvious to me why
> > the test now fails however.
> 
> Can you please be more specific / clear ? I have no idea what those 300
> lines of cryptic output mean, nor what are you trying to say by the above,
> sorry.

If you build with clang, for sandbox, and run the tests, U-Boot crashes
in the unit tests that you start with "ut dm".

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20210328/f875dfc4/attachment.sig>