* [PATCH] arm: iproc: Add higher speed configurations @ 2021-06-04 2:25 Chris Packham 2021-06-17 2:10 ` Chris Packham 2021-07-06 22:50 ` Tom Rini 0 siblings, 2 replies; 5+ messages in thread From: Chris Packham @ 2021-06-04 2:25 UTC (permalink / raw) To: u-boot; +Cc: Steve Rae, Scott Branden, Chris Packham, Tom Rini Add support for 1.3GHz, 1.35GHz and 1.4GHz parts. This is based on equivalent code in Broadcom's LDK 5.0.6. Signed-off-by: Chris Packham <judge.packham@gmail.com> --- As Broadcom are currently migrating users to the BCM58525BB1KF14G part I suspect others may want this. In our case because we wanted to still run at 1.2GHz we also had to set CONFIG_ARMCLK to 1200. arch/arm/cpu/armv7/iproc-common/armpll.c | 29 +++++++++++++----------- 1 file changed, 16 insertions(+), 13 deletions(-) diff --git a/arch/arm/cpu/armv7/iproc-common/armpll.c b/arch/arm/cpu/armv7/iproc-common/armpll.c index efa3d9e5a9bd..8c3a323f0654 100644 --- a/arch/arm/cpu/armv7/iproc-common/armpll.c +++ b/arch/arm/cpu/armv7/iproc-common/armpll.c @@ -19,19 +19,22 @@ struct armpll_parameters { }; struct armpll_parameters armpll_clk_tab[] = { - { 25, 64, 1, 1, 0}, - { 100, 64, 1, 1, 2}, - { 400, 64, 1, 1, 6}, - { 448, 71, 713050, 1, 6}, - { 500, 80, 1, 1, 6}, - { 560, 89, 629145, 1, 6}, - { 600, 96, 1, 1, 6}, - { 800, 64, 1, 1, 7}, - { 896, 71, 713050, 1, 7}, - { 1000, 80, 1, 1, 7}, - { 1100, 88, 1, 1, 7}, - { 1120, 89, 629145, 1, 7}, - { 1200, 96, 1, 1, 7}, + { 25, 64, 1, 1, 0}, + { 100, 64, 1, 1, 2}, + { 400, 64, 1, 1, 6}, + { 448, 71, 713050, 1, 6}, + { 500, 80, 1, 1, 6}, + { 560, 89, 629145, 1, 6}, + { 600, 96, 1, 1, 6}, + { 800, 64, 1, 1, 7}, + { 896, 71, 713050, 1, 7}, + { 1000, 80, 1, 1, 7}, + { 1100, 88, 1, 1, 7}, + { 1120, 89, 629145, 1, 7}, + { 1200, 96, 1, 1, 7}, + { 1300, 104, 1, 1, 7}, + { 1350, 108, 1, 1, 7}, + { 1400, 112, 1, 1, 7}, }; uint32_t armpll_config(uint32_t clkmhz) -- 2.31.1 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] arm: iproc: Add higher speed configurations 2021-06-04 2:25 [PATCH] arm: iproc: Add higher speed configurations Chris Packham @ 2021-06-17 2:10 ` Chris Packham 2021-06-17 12:48 ` Tom Rini 2021-07-06 22:50 ` Tom Rini 1 sibling, 1 reply; 5+ messages in thread From: Chris Packham @ 2021-06-17 2:10 UTC (permalink / raw) To: Tom Rini; +Cc: Scott Branden, u-boot On Fri, Jun 4, 2021 at 2:25 PM Chris Packham <judge.packham@gmail.com> wrote: > > Add support for 1.3GHz, 1.35GHz and 1.4GHz parts. This is based on > equivalent code in Broadcom's LDK 5.0.6. > > Signed-off-by: Chris Packham <judge.packham@gmail.com> > Hi Tom, This seems to have fallen between the cracks. Are you able to take it through one of your trees? > --- > As Broadcom are currently migrating users to the BCM58525BB1KF14G part > I suspect others may want this. In our case because we wanted to still > run at 1.2GHz we also had to set CONFIG_ARMCLK to 1200. > > arch/arm/cpu/armv7/iproc-common/armpll.c | 29 +++++++++++++----------- > 1 file changed, 16 insertions(+), 13 deletions(-) > > diff --git a/arch/arm/cpu/armv7/iproc-common/armpll.c b/arch/arm/cpu/armv7/iproc-common/armpll.c > index efa3d9e5a9bd..8c3a323f0654 100644 > --- a/arch/arm/cpu/armv7/iproc-common/armpll.c > +++ b/arch/arm/cpu/armv7/iproc-common/armpll.c > @@ -19,19 +19,22 @@ struct armpll_parameters { > }; > > struct armpll_parameters armpll_clk_tab[] = { > - { 25, 64, 1, 1, 0}, > - { 100, 64, 1, 1, 2}, > - { 400, 64, 1, 1, 6}, > - { 448, 71, 713050, 1, 6}, > - { 500, 80, 1, 1, 6}, > - { 560, 89, 629145, 1, 6}, > - { 600, 96, 1, 1, 6}, > - { 800, 64, 1, 1, 7}, > - { 896, 71, 713050, 1, 7}, > - { 1000, 80, 1, 1, 7}, > - { 1100, 88, 1, 1, 7}, > - { 1120, 89, 629145, 1, 7}, > - { 1200, 96, 1, 1, 7}, > + { 25, 64, 1, 1, 0}, > + { 100, 64, 1, 1, 2}, > + { 400, 64, 1, 1, 6}, > + { 448, 71, 713050, 1, 6}, > + { 500, 80, 1, 1, 6}, > + { 560, 89, 629145, 1, 6}, > + { 600, 96, 1, 1, 6}, > + { 800, 64, 1, 1, 7}, > + { 896, 71, 713050, 1, 7}, > + { 1000, 80, 1, 1, 7}, > + { 1100, 88, 1, 1, 7}, > + { 1120, 89, 629145, 1, 7}, > + { 1200, 96, 1, 1, 7}, > + { 1300, 104, 1, 1, 7}, > + { 1350, 108, 1, 1, 7}, > + { 1400, 112, 1, 1, 7}, > }; > > uint32_t armpll_config(uint32_t clkmhz) > -- > 2.31.1 > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] arm: iproc: Add higher speed configurations 2021-06-17 2:10 ` Chris Packham @ 2021-06-17 12:48 ` Tom Rini 2021-06-18 3:26 ` Chris Packham 0 siblings, 1 reply; 5+ messages in thread From: Tom Rini @ 2021-06-17 12:48 UTC (permalink / raw) To: Chris Packham; +Cc: Scott Branden, u-boot [-- Attachment #1: Type: text/plain, Size: 520 bytes --] On Thu, Jun 17, 2021 at 02:10:14PM +1200, Chris Packham wrote: > On Fri, Jun 4, 2021 at 2:25 PM Chris Packham <judge.packham@gmail.com> wrote: > > > > Add support for 1.3GHz, 1.35GHz and 1.4GHz parts. This is based on > > equivalent code in Broadcom's LDK 5.0.6. > > > > Signed-off-by: Chris Packham <judge.packham@gmail.com> > > Hi Tom, > > This seems to have fallen between the cracks. Are you able to take it > through one of your trees? I can, is this needed for the v2021.07 release? -- Tom [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 659 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] arm: iproc: Add higher speed configurations 2021-06-17 12:48 ` Tom Rini @ 2021-06-18 3:26 ` Chris Packham 0 siblings, 0 replies; 5+ messages in thread From: Chris Packham @ 2021-06-18 3:26 UTC (permalink / raw) To: Tom Rini; +Cc: Scott Branden, u-boot On Fri, Jun 18, 2021 at 12:48 AM Tom Rini <trini@konsulko.com> wrote: > > On Thu, Jun 17, 2021 at 02:10:14PM +1200, Chris Packham wrote: > > > On Fri, Jun 4, 2021 at 2:25 PM Chris Packham <judge.packham@gmail.com> wrote: > > > > > > Add support for 1.3GHz, 1.35GHz and 1.4GHz parts. This is based on > > > equivalent code in Broadcom's LDK 5.0.6. > > > > > > Signed-off-by: Chris Packham <judge.packham@gmail.com> > > > > Hi Tom, > > > > This seems to have fallen between the cracks. Are you able to take it > > through one of your trees? > > I can, is this needed for the v2021.07 release? > Personally I'd like to see it in v2021.07 but I understand that we're well past the merge window and this is not strictly a fix. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] arm: iproc: Add higher speed configurations 2021-06-04 2:25 [PATCH] arm: iproc: Add higher speed configurations Chris Packham 2021-06-17 2:10 ` Chris Packham @ 2021-07-06 22:50 ` Tom Rini 1 sibling, 0 replies; 5+ messages in thread From: Tom Rini @ 2021-07-06 22:50 UTC (permalink / raw) To: Chris Packham; +Cc: u-boot, Steve Rae, Scott Branden [-- Attachment #1: Type: text/plain, Size: 291 bytes --] On Fri, Jun 04, 2021 at 02:25:36PM +1200, Chris Packham wrote: > Add support for 1.3GHz, 1.35GHz and 1.4GHz parts. This is based on > equivalent code in Broadcom's LDK 5.0.6. > > Signed-off-by: Chris Packham <judge.packham@gmail.com> Applied to u-boot/master, thanks! -- Tom [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 659 bytes --] ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-07-06 22:50 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2021-06-04 2:25 [PATCH] arm: iproc: Add higher speed configurations Chris Packham 2021-06-17 2:10 ` Chris Packham 2021-06-17 12:48 ` Tom Rini 2021-06-18 3:26 ` Chris Packham 2021-07-06 22:50 ` Tom Rini
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox