From: Vladimir Oltean <vladimir.oltean@nxp.com>
To: Michael Walle <michael@walle.cc>
Cc: "u-boot@lists.denx.de" <u-boot@lists.denx.de>,
Jagan Teki <jagan@amarulasolutions.com>,
Priyanka Jain <priyanka.jain@nxp.com>,
Tom Rini <trini@konsulko.com>,
Peter Griffin <peter.griffin@linaro.org>,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: Re: [PATCH 4/9] arm: dts: ls1028a: update the labels
Date: Tue, 31 Aug 2021 17:57:06 +0000 [thread overview]
Message-ID: <20210831175705.poo7ugfjorvc3tn2@skbuf> (raw)
In-Reply-To: <20210831154028.1649864-5-michael@walle.cc>
On Tue, Aug 31, 2021 at 05:40:23PM +0200, Michael Walle wrote:
> Update the labels of the nodes to match the kernel ones.
>
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
-----------------------------[ cut here ]-----------------------------
From 6583bc615f3e6f49d90fabb2033a49e9eab804dc Mon Sep 17 00:00:00 2001
From: Vladimir Oltean <vladimir.oltean@nxp.com>
Date: Tue, 31 Aug 2021 20:55:37 +0300
Subject: [PATCH] fixup! arm: dts: ls1028a: update the labels
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi | 2 +-
arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi | 2 +-
arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi | 4 ++--
arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi | 4 ++--
arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi | 4 ++--
arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi | 4 ++--
arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi | 4 ++--
arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi | 4 ++--
arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi | 4 ++--
9 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi
index 181fd2ddcb3f..68e048966f13 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi
@@ -13,7 +13,7 @@
#include "fsl-sch-30842.dtsi"
};
-&enetc0 {
+&enetc_port0 {
status = "okay";
phy-mode = "usxgmii";
phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>;
diff --git a/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi
index 67b68f1b3dbe..297ffa8878dc 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi
@@ -12,7 +12,7 @@
#include "fsl-sch-30842.dtsi"
};
-&enetc0 {
+&enetc_port0 {
status = "okay";
phy-mode = "sgmii-2500";
phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>;
diff --git a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
index 433731df0eb0..4b935412cdd2 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
@@ -20,7 +20,7 @@
#include "fsl-sch-30841.dtsi"
};
-&enetc2 {
+&enetc_port2 {
status = "okay";
};
@@ -53,6 +53,6 @@
};
&mscc_felix_port4 {
- ethernet = <&enetc2>;
+ ethernet = <&enetc_port2>;
status = "okay";
};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
index cb74c8b37160..2c0012bcb441 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
@@ -9,7 +9,7 @@
#include "fsl-sch-30841.dtsi"
};
-&enetc2 {
+&enetc_port2 {
status = "okay";
};
@@ -30,6 +30,6 @@
};
&mscc_felix_port4 {
- ethernet = <&enetc2>;
+ ethernet = <&enetc_port2>;
status = "okay";
};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
index f74c1433af06..ce35f3567af7 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
@@ -34,7 +34,7 @@
#include "fsl-sch-24801.dtsi"
};
-&enetc2 {
+&enetc_port2 {
status = "okay";
};
@@ -67,6 +67,6 @@
};
&mscc_felix_port4 {
- ethernet = <&enetc2>;
+ ethernet = <&enetc_port2>;
status = "okay";
};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
index 4edc428b2749..cd8c9a34a0fe 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
@@ -19,7 +19,7 @@
#include "fsl-sch-24801.dtsi"
};
-&enetc2 {
+&enetc_port2 {
status = "okay";
};
@@ -52,6 +52,6 @@
};
&mscc_felix_port4 {
- ethernet = <&enetc2>;
+ ethernet = <&enetc_port2>;
status = "okay";
};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
index 7fefb4c99fe3..6d089a401cdf 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
@@ -19,7 +19,7 @@
#include "fsl-sch-30841.dtsi"
};
-&enetc2 {
+&enetc_port2 {
status = "okay";
};
@@ -52,6 +52,6 @@
};
&mscc_felix_port4 {
- ethernet = <&enetc2>;
+ ethernet = <&enetc_port2>;
status = "okay";
};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
index 1834418ae234..23e2a298bb67 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
@@ -9,7 +9,7 @@
#include "fsl-sch-30842.dtsi"
};
-&enetc2 {
+&enetc_port2 {
status = "okay";
};
@@ -24,6 +24,6 @@
};
&mscc_felix_port4 {
- ethernet = <&enetc2>;
+ ethernet = <&enetc_port2>;
status = "okay";
};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
index 2ee11bcacbe5..a61058446dbf 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
@@ -9,7 +9,7 @@
#include "fsl-sch-30842.dtsi"
};
-&enetc2 {
+&enetc_port2 {
status = "okay";
};
@@ -24,6 +24,6 @@
};
&mscc_felix_port4 {
- ethernet = <&enetc2>;
+ ethernet = <&enetc_port2>;
status = "okay";
};
-----------------------------[ cut here ]-----------------------------
next prev parent reply other threads:[~2021-08-31 17:57 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-31 15:40 [PATCH 0/9] arm: dts: ls1028a: sync device tree with linux Michael Walle
2021-08-31 15:40 ` [PATCH 1/9] armv8: ls1028a: add IOMMU stream ID to vivante node Michael Walle
2021-08-31 15:40 ` [PATCH 2/9] arm: dts: ls1028a: move devices into /soc Michael Walle
2021-08-31 18:46 ` Vladimir Oltean
2021-08-31 21:32 ` Michael Walle
2021-08-31 21:54 ` Vladimir Oltean
2021-08-31 15:40 ` [PATCH 3/9] arm: dts: ls1028a: remove /memory node Michael Walle
2021-08-31 18:38 ` Vladimir Oltean
2021-08-31 15:40 ` [PATCH 4/9] arm: dts: ls1028a: update the labels Michael Walle
2021-08-31 17:57 ` Vladimir Oltean [this message]
2021-08-31 15:40 ` [PATCH 5/9] watchdog: sp805_wdt: use correct compatible string Michael Walle
2021-08-31 15:40 ` [PATCH 6/9] spi: fsl_dspi: add new compatible fsl,ls1021a-v1.0-dspi Michael Walle
2021-08-31 18:32 ` Vladimir Oltean
2021-08-31 21:35 ` Michael Walle
2021-08-31 21:39 ` Vladimir Oltean
2021-08-31 21:53 ` Michael Walle
2021-08-31 21:58 ` Vladimir Oltean
2021-08-31 15:40 ` [PATCH 7/9] serial: lpuart: add new compatible fsl,ls1028a-lpuart Michael Walle
2021-08-31 18:28 ` [PATCH 7/9] serial: lpuart: add new compatible fsl, ls1028a-lpuart Vladimir Oltean
2021-08-31 21:37 ` Michael Walle
2021-08-31 22:01 ` Vladimir Oltean
2021-08-31 15:40 ` [PATCH 8/9] arm: dts: ls1028a: sync the fsl-ls1028a.dtsi with linux Michael Walle
2021-08-31 15:40 ` [PATCH 9/9] arm: dts: sl28: sync dtbs Michael Walle
2021-08-31 18:22 ` [PATCH 0/9] arm: dts: ls1028a: sync device tree with linux Vladimir Oltean
2021-08-31 21:38 ` Michael Walle
2021-08-31 18:51 ` Vladimir Oltean
2021-08-31 21:19 ` Michael Walle
2021-08-31 22:03 ` Vladimir Oltean
2021-08-31 22:07 ` Michael Walle
2021-09-01 7:51 ` Michael Walle
2021-08-31 22:11 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210831175705.poo7ugfjorvc3tn2@skbuf \
--to=vladimir.oltean@nxp.com \
--cc=jagan@amarulasolutions.com \
--cc=manivannan.sadhasivam@linaro.org \
--cc=michael@walle.cc \
--cc=peter.griffin@linaro.org \
--cc=priyanka.jain@nxp.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox