U-Boot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Cc: Weijie Gao <weijie.gao@mediatek.com>,
	GSS_MTK_Uboot_upstream <GSS_MTK_Uboot_upstream@mediatek.com>,
	Peng Fan <peng.fan@nxp.com>,
	Jaehoon Chung <jh80.chung@samsung.com>
Subject: [PATCH 01/81] mmc: Migrate MMC_SUPPORTS_TUNING to Kconfig
Date: Wed,  1 May 2024 19:30:18 -0600	[thread overview]
Message-ID: <20240502013138.2383421-1-trini@konsulko.com> (raw)

The constraints on the MMC_SUPPORTS_TUNING symbol can easily be
expressed in Kconfig (with the addition of SPL_MMC_SUPPORTS_TUNING).
Furthermore, in order to remove <common.h> from the MMC subsystem, the
way this symbol is used today needs to be changed in order to continue
functioning.

Signed-off-by: Tom Rini <trini@konsulko.com>
---
Cc: Weijie Gao <weijie.gao@mediatek.com>
Cc: GSS_MTK_Uboot_upstream <GSS_MTK_Uboot_upstream@mediatek.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
---
 arch/arm/mach-mediatek/Kconfig     |  1 +
 arch/mips/mach-mtmips/Kconfig      |  1 +
 drivers/mmc/Kconfig                | 11 +++++++++++
 drivers/mmc/am654_sdhci.c          |  6 +++---
 drivers/mmc/fsl_esdhc.c            |  4 ++--
 drivers/mmc/fsl_esdhc_imx.c        |  8 ++++----
 drivers/mmc/mmc-uclass.c           |  2 +-
 drivers/mmc/mmc.c                  | 12 ++++++------
 drivers/mmc/mtk-sd.c               |  4 ++--
 drivers/mmc/octeontx_hsmmc.c       | 12 ++++++------
 drivers/mmc/omap_hsmmc.c           |  4 ++--
 drivers/mmc/sdhci-cadence.c        |  2 +-
 drivers/mmc/sdhci.c                |  4 ++--
 include/configs/mt7621.h           |  3 ---
 include/configs/mt7623.h           |  3 ---
 include/configs/octeontx2_common.h |  5 -----
 include/mmc.h                      |  9 +--------
 17 files changed, 43 insertions(+), 48 deletions(-)

diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
index 82018bd9d3e3..ff1fdee5c8da 100644
--- a/arch/arm/mach-mediatek/Kconfig
+++ b/arch/arm/mach-mediatek/Kconfig
@@ -23,6 +23,7 @@ config TARGET_MT7622
 config TARGET_MT7623
 	bool "MediaTek MT7623 SoC"
 	select CPU_V7A
+	select MMC_SUPPORTS_TUNING
 	help
 	  The MediaTek MT7623 is a ARM-based SoC with a quad-core Cortex-A7
 	  including NEON and GPU, Mali-450 graphics, several DDR3 options,
diff --git a/arch/mips/mach-mtmips/Kconfig b/arch/mips/mach-mtmips/Kconfig
index 15b2792e619b..3fcd0b8465b4 100644
--- a/arch/mips/mach-mtmips/Kconfig
+++ b/arch/mips/mach-mtmips/Kconfig
@@ -80,6 +80,7 @@ config SOC_MT7621
 	bool "MT7621"
 	select MIPS_CM
 	select MIPS_L2_CACHE
+	select MMC_SUPPORTS_TUNING
 	select SYS_CACHE_SHIFT_5
 	select SYS_MIPS_CACHE_INIT_RAM_LOAD
 	select PINCTRL_MT7621
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 549634891a36..d0944793c92d 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -147,9 +147,16 @@ config SPL_MMC_IO_VOLTAGE
 	  support. For eMMC this not mandatory, but not enabling this option may
 	  prevent the driver of using the faster modes.
 
+config MMC_SUPPORTS_TUNING
+	bool
+
+config SPL_MMC_SUPPORTS_TUNING
+	bool
+
 config MMC_UHS_SUPPORT
 	bool "enable UHS support"
 	depends on MMC_IO_VOLTAGE
+	select MMC_SUPPORTS_TUNING
 	help
 	  The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
 	  cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
@@ -158,6 +165,7 @@ config MMC_UHS_SUPPORT
 config SPL_MMC_UHS_SUPPORT
 	bool "enable UHS support in SPL"
 	depends on SPL_MMC_IO_VOLTAGE
+	select SPL_MMC_SUPPORTS_TUNING
 	help
 	  The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
 	  cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
@@ -193,6 +201,7 @@ config SPL_MMC_HS400_SUPPORT
 
 config MMC_HS200_SUPPORT
 	bool "enable HS200 support"
+	select MMC_SUPPORTS_TUNING
 	help
 	  The HS200 mode is support by some eMMC. The bus frequency is up to
 	  200MHz. This mode requires tuning the IO.
@@ -200,6 +209,7 @@ config MMC_HS200_SUPPORT
 config SPL_MMC_HS200_SUPPORT
 	bool "enable HS200 support in SPL"
 	depends on SPL_MMC
+	select SPL_MMC_SUPPORTS_TUNING
 	help
 	  The HS200 mode is support by some eMMC. The bus frequency is up to
 	  200MHz. This mode requires tuning the IO.
@@ -347,6 +357,7 @@ config MMC_OCTEONTX
 	bool "Marvell Octeon Multimedia Card Interface support"
 	depends on (ARCH_OCTEON || ARCH_OCTEONTX || ARCH_OCTEONTX2)
 	depends on DM_MMC
+	select MMC_SUPPORTS_TUNING if ARCH_OCTEONTX2
 	help
 	  This selects the Octeon Multimedia card Interface.
 	  If you have an OcteonTX/TX2 or MIPS Octeon board with a
diff --git a/drivers/mmc/am654_sdhci.c b/drivers/mmc/am654_sdhci.c
index fadab7d40bb7..ffb461c2f6c1 100644
--- a/drivers/mmc/am654_sdhci.c
+++ b/drivers/mmc/am654_sdhci.c
@@ -397,7 +397,7 @@ static void am654_sdhci_write_b(struct sdhci_host *host, u8 val, int reg)
 
 	writeb(val, host->ioaddr + reg);
 }
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 #define ITAPDLY_LENGTH 32
 #define ITAPDLY_LAST_INDEX (ITAPDLY_LENGTH - 1)
 
@@ -500,7 +500,7 @@ static int am654_sdhci_execute_tuning(struct mmc *mmc, u8 opcode)
 }
 #endif
 const struct sdhci_ops am654_sdhci_ops = {
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 	.platform_execute_tuning = am654_sdhci_execute_tuning,
 #endif
 	.deferred_probe		= am654_sdhci_deferred_probe,
@@ -560,7 +560,7 @@ static int j721e_4bit_sdhci_set_ios_post(struct sdhci_host *host)
 }
 
 const struct sdhci_ops j721e_4bit_sdhci_ops = {
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 	.platform_execute_tuning = am654_sdhci_execute_tuning,
 #endif
 	.deferred_probe		= am654_sdhci_deferred_probe,
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 595d88bd5625..5ac1c6a0e9e1 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -1102,7 +1102,7 @@ static int fsl_esdhc_reinit(struct udevice *dev)
 	return esdhc_init_common(priv, &plat->mmc);
 }
 
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 static int fsl_esdhc_execute_tuning(struct udevice *dev, uint32_t opcode)
 {
 	struct fsl_esdhc_plat *plat = dev_get_plat(dev);
@@ -1175,7 +1175,7 @@ static const struct dm_mmc_ops fsl_esdhc_ops = {
 	.get_cd		= fsl_esdhc_get_cd,
 	.send_cmd	= fsl_esdhc_send_cmd,
 	.set_ios	= fsl_esdhc_set_ios,
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 	.execute_tuning = fsl_esdhc_execute_tuning,
 #endif
 	.reinit = fsl_esdhc_reinit,
diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
index b74c01400205..8b2ef9391f3e 100644
--- a/drivers/mmc/fsl_esdhc_imx.c
+++ b/drivers/mmc/fsl_esdhc_imx.c
@@ -635,7 +635,7 @@ static void set_sysctl(struct fsl_esdhc_priv *priv, struct mmc *mmc, uint clock)
 	priv->clock = clock;
 }
 
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 static int esdhc_change_pinstate(struct udevice *dev)
 {
 	struct fsl_esdhc_priv *priv = dev_get_priv(dev);
@@ -913,7 +913,7 @@ static int esdhc_set_ios_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
 	int ret __maybe_unused;
 	u32 clock;
 
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 	/*
 	 * call esdhc_set_timing() before update the clock rate,
 	 * This is because current we support DDR and SDR mode,
@@ -951,7 +951,7 @@ static int esdhc_set_ios_common(struct fsl_esdhc_priv *priv, struct mmc *mmc)
 			esdhc_setbits32(&regs->sysctl, SYSCTL_PEREN | SYSCTL_CKEN);
 	}
 
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 	/*
 	 * For HS400/HS400ES mode, make sure set the strobe dll in the
 	 * target clock rate. So call esdhc_set_strobe_dll() after the
@@ -1618,7 +1618,7 @@ static const struct dm_mmc_ops fsl_esdhc_ops = {
 	.get_cd		= fsl_esdhc_get_cd,
 	.send_cmd	= fsl_esdhc_send_cmd,
 	.set_ios	= fsl_esdhc_set_ios,
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 	.execute_tuning	= fsl_esdhc_execute_tuning,
 #endif
 #if CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT)
diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c
index 24170c59ecc1..0685b86af464 100644
--- a/drivers/mmc/mmc-uclass.c
+++ b/drivers/mmc/mmc-uclass.c
@@ -112,7 +112,7 @@ int mmc_getcd(struct mmc *mmc)
 	return dm_mmc_get_cd(mmc->dev);
 }
 
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 static int dm_mmc_execute_tuning(struct udevice *dev, uint opcode)
 {
 	struct dm_mmc_ops *ops = mmc_get_ops(dev);
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 7b068c71ff37..4543d94c7205 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -329,7 +329,7 @@ int mmc_set_blocklen(struct mmc *mmc, int len)
 				   MMC_QUIRK_RETRY_SET_BLOCKLEN, 4);
 }
 
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 static const u8 tuning_blk_pattern_4bit[] = {
 	0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc,
 	0xc3, 0x3c, 0xcc, 0xff, 0xfe, 0xff, 0xfe, 0xef,
@@ -1621,7 +1621,7 @@ static inline int bus_width(uint cap)
 }
 
 #if !CONFIG_IS_ENABLED(DM_MMC)
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 static int mmc_execute_tuning(struct mmc *mmc, uint opcode)
 {
 	return -ENOTSUPP;
@@ -1702,7 +1702,7 @@ void mmc_dump_capabilities(const char *text, uint caps)
 struct mode_width_tuning {
 	enum bus_mode mode;
 	uint widths;
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 	uint tuning;
 #endif
 };
@@ -1743,7 +1743,7 @@ static inline int mmc_set_signal_voltage(struct mmc *mmc, uint signal_voltage)
 #if !CONFIG_IS_ENABLED(MMC_TINY)
 static const struct mode_width_tuning sd_modes_by_pref[] = {
 #if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 	{
 		.mode = UHS_SDR104,
 		.widths = MMC_MODE_4BIT | MMC_MODE_1BIT,
@@ -1846,7 +1846,7 @@ static int sd_select_mode_and_width(struct mmc *mmc, uint card_caps)
 				mmc_set_clock(mmc, mmc->tran_speed,
 						MMC_CLK_ENABLE);
 
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 				/* execute tuning if needed */
 				if (mwt->tuning && !mmc_host_is_spi(mmc)) {
 					err = mmc_execute_tuning(mmc,
@@ -2224,7 +2224,7 @@ static int mmc_select_mode_and_width(struct mmc *mmc, uint card_caps)
 				mmc_select_mode(mmc, mwt->mode);
 				mmc_set_clock(mmc, mmc->tran_speed,
 					      MMC_CLK_ENABLE);
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 
 				/* execute tuning if needed */
 				if (mwt->tuning) {
diff --git a/drivers/mmc/mtk-sd.c b/drivers/mmc/mtk-sd.c
index 296aaee73318..4bd66ecf93ad 100644
--- a/drivers/mmc/mtk-sd.c
+++ b/drivers/mmc/mtk-sd.c
@@ -1011,7 +1011,7 @@ static int msdc_ops_get_wp(struct udevice *dev)
 #endif
 }
 
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 static u32 test_delay_bit(u32 delay, u32 bit)
 {
 	bit %= PAD_DELAY_MAX;
@@ -1760,7 +1760,7 @@ static const struct dm_mmc_ops msdc_ops = {
 	.set_ios = msdc_ops_set_ios,
 	.get_cd = msdc_ops_get_cd,
 	.get_wp = msdc_ops_get_wp,
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 	.execute_tuning = msdc_execute_tuning,
 #endif
 	.wait_dat0 = msdc_ops_wait_dat0,
diff --git a/drivers/mmc/octeontx_hsmmc.c b/drivers/mmc/octeontx_hsmmc.c
index 7f9c4f4d36d4..3b5e12217325 100644
--- a/drivers/mmc/octeontx_hsmmc.c
+++ b/drivers/mmc/octeontx_hsmmc.c
@@ -794,7 +794,7 @@ octeontx_mmc_get_cr_mods(struct mmc *mmc, const struct mmc_cmd *cmd,
 	u8 desired_ctype = 0;
 
 	if (IS_MMC(mmc)) {
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 		if (cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200) {
 			if (cmd->resp_type == MMC_RSP_R1)
 				cr.rtype_xor = 1;
@@ -1631,7 +1631,7 @@ static int octeontx_mmc_dev_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
 	return octeontx_mmc_send_cmd(dev_to_mmc(dev), cmd, data);
 }
 
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 static int octeontx_mmc_test_cmd(struct mmc *mmc, u32 opcode, int *statp)
 {
 	struct mmc_cmd cmd;
@@ -2421,12 +2421,12 @@ static int octeontx_mmc_execute_tuning(struct udevice *dev, u32 opcode)
 
 	return 0;
 }
-#else /* MMC_SUPPORTS_TUNING */
+#else /* CONFIG_MMC_SUPPORTS_TUNING */
 static void octeontx_mmc_set_emm_timing(struct mmc *mmc,
 					union mio_emm_timing emm_timing)
 {
 }
-#endif /* MMC_SUPPORTS_TUNING */
+#endif /* CONFIG_MMC_SUPPORTS_TUNING */
 
 /**
  * Calculate the clock period with rounding up
@@ -2573,7 +2573,7 @@ static int octeontx_mmc_set_ios(struct udevice *dev)
 
 	err = octeontx_mmc_configure_delay(mmc);
 
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 	if (!err && mmc->selected_mode == MMC_HS_400 && !slot->hs400_tuned) {
 		debug("%s: Tuning HS400 mode\n", __func__);
 		err = octeontx_tune_hs400(mmc);
@@ -3776,7 +3776,7 @@ static const struct dm_mmc_ops octeontx_hsmmc_ops = {
 	.set_ios = octeontx_mmc_set_ios,
 	.get_cd = octeontx_mmc_get_cd,
 	.get_wp = octeontx_mmc_get_wp,
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 	.execute_tuning = octeontx_mmc_execute_tuning,
 #endif
 };
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index 99f21b2c546a..118d9cd16fdb 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -577,7 +577,7 @@ static uint32_t omap_hsmmc_set_capabilities(struct mmc *mmc)
 	return val;
 }
 
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 static void omap_hsmmc_disable_tuning(struct mmc *mmc)
 {
 	struct hsmmc *mmc_base;
@@ -1518,7 +1518,7 @@ static const struct dm_mmc_ops omap_hsmmc_ops = {
 	.get_cd		= omap_hsmmc_getcd,
 	.get_wp		= omap_hsmmc_getwp,
 #endif
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 	.execute_tuning = omap_hsmmc_execute_tuning,
 #endif
 	.wait_dat0	= omap_hsmmc_wait_dat0,
diff --git a/drivers/mmc/sdhci-cadence.c b/drivers/mmc/sdhci-cadence.c
index c0a9f60b1496..0570dbca00d7 100644
--- a/drivers/mmc/sdhci-cadence.c
+++ b/drivers/mmc/sdhci-cadence.c
@@ -274,7 +274,7 @@ static int sdhci_cdns_probe(struct udevice *dev)
 	host->ops = &sdhci_cdns_ops;
 	host->quirks |= SDHCI_QUIRK_WAIT_SEND_CMD;
 	sdhci_cdns_mmc_ops = sdhci_ops;
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 	sdhci_cdns_mmc_ops.execute_tuning = sdhci_cdns_execute_tuning;
 #endif
 
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index af654ea8d13c..d06f2c02bb7b 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -351,7 +351,7 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
 		return -ECOMM;
 }
 
-#if defined(CONFIG_DM_MMC) && defined(MMC_SUPPORTS_TUNING)
+#if defined(CONFIG_DM_MMC) && CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 static int sdhci_execute_tuning(struct udevice *dev, uint opcode)
 {
 	int err;
@@ -848,7 +848,7 @@ const struct dm_mmc_ops sdhci_ops = {
 	.set_ios	= sdhci_set_ios,
 	.get_cd		= sdhci_get_cd,
 	.deferred_probe	= sdhci_deferred_probe,
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 	.execute_tuning	= sdhci_execute_tuning,
 #endif
 	.wait_dat0	= sdhci_wait_dat0,
diff --git a/include/configs/mt7621.h b/include/configs/mt7621.h
index bf2bc2d45c09..e6dba7071950 100644
--- a/include/configs/mt7621.h
+++ b/include/configs/mt7621.h
@@ -14,9 +14,6 @@
 
 #define CFG_SYS_INIT_SP_OFFSET		0x800000
 
-/* MMC */
-#define MMC_SUPPORTS_TUNING
-
 /* Serial SPL */
 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL)
 #define CFG_SYS_NS16550_CLK		50000000
diff --git a/include/configs/mt7623.h b/include/configs/mt7623.h
index fca234a1dc71..6f42cd32d80f 100644
--- a/include/configs/mt7623.h
+++ b/include/configs/mt7623.h
@@ -11,9 +11,6 @@
 
 #include <linux/sizes.h>
 
-/* MMC */
-#define MMC_SUPPORTS_TUNING
-
 /* DRAM */
 #define CFG_SYS_SDRAM_BASE		0x80000000
 
diff --git a/include/configs/octeontx2_common.h b/include/configs/octeontx2_common.h
index c4db38562d83..f415dffddbea 100644
--- a/include/configs/octeontx2_common.h
+++ b/include/configs/octeontx2_common.h
@@ -19,9 +19,4 @@
 					"loadaddr=20080000\0"	\
 					"ethrotate=yes\0"
 
-#if defined(CONFIG_MMC_OCTEONTX)
-#define MMC_SUPPORTS_TUNING
-/** EMMC specific defines */
-#endif
-
 #endif /* __OCTEONTX2_COMMON_H__ */
diff --git a/include/mmc.h b/include/mmc.h
index 4b8327f1f93b..7f1900363b91 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -18,13 +18,6 @@
 
 struct bd_info;
 
-#if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT)
-#define MMC_SUPPORTS_TUNING
-#endif
-#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
-#define MMC_SUPPORTS_TUNING
-#endif
-
 /* SD/MMC version bits; 8 flags, 8 major, 8 minor, 8 change */
 #define SD_VERSION_SD	(1U << 31)
 #define MMC_VERSION_MMC	(1U << 30)
@@ -485,7 +478,7 @@ struct dm_mmc_ops {
 	 */
 	int (*get_wp)(struct udevice *dev);
 
-#ifdef MMC_SUPPORTS_TUNING
+#if CONFIG_IS_ENABLED(MMC_SUPPORTS_TUNING)
 	/**
 	 * execute_tuning() - Start the tuning process
 	 *
-- 
2.34.1


             reply	other threads:[~2024-05-02  1:31 UTC|newest]

Thread overview: 136+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20240502013146epcas1p3dce70115dbffcbd41eb7f657d6188d2e@epcas1p3.samsung.com>
2024-05-02  1:30 ` Tom Rini [this message]
2024-05-02  1:30   ` [PATCH 02/81] arm: aspeed: Add missing <linux/types.h> Tom Rini
2024-05-02  1:30   ` [PATCH 03/81] arm: sunxi: " Tom Rini
2024-05-02  1:30   ` [PATCH 04/81] arm: nexell: " Tom Rini
2024-05-09  8:54     ` Stefan Bosch
2024-05-02  1:30   ` [PATCH 05/81] arm: socfpga: " Tom Rini
2024-05-02  1:30   ` [PATCH 06/81] x86: " Tom Rini
2024-05-02  1:30   ` [PATCH 07/81] include: " Tom Rini
2024-05-02  1:30   ` [PATCH 08/81] fsl_ifc.h: Add <asm/ppc.h> Tom Rini
2024-05-02  1:30   ` [PATCH 09/81] include/linux/compat.h: Add <time.h> Tom Rini
2024-05-02  1:30   ` [PATCH 10/81] adc: Remove <common.h> and add needed includes Tom Rini
2024-05-02  1:30   ` [PATCH 11/81] ata: " Tom Rini
2024-05-02  3:32     ` Tony Dinh
2024-05-02  1:30   ` [PATCH 12/81] axi: " Tom Rini
2024-05-02  1:30   ` [PATCH 13/81] bios_emulator: " Tom Rini
2024-05-02  1:30   ` [PATCH 14/81] block: " Tom Rini
2024-05-02  7:25     ` Mattijs Korpershoek
2024-05-10  0:40     ` Kever Yang
2024-05-02  1:30   ` [PATCH 15/81] bootcount: " Tom Rini
2024-05-02  1:30   ` [PATCH 16/81] bus: " Tom Rini
2024-05-02  1:30   ` [PATCH 17/81] button: " Tom Rini
2024-05-02  1:30   ` [PATCH 18/81] cache: " Tom Rini
2024-05-02  1:30   ` [PATCH 19/81] clk: " Tom Rini
2024-05-09  9:07     ` Stefan Bosch
2024-05-10  0:40     ` Kever Yang
2024-05-02  1:30   ` [PATCH 20/81] core: " Tom Rini
2024-05-02  1:30   ` [PATCH 21/81] cpu: " Tom Rini
2024-05-02  1:30   ` [PATCH 22/81] crypto: " Tom Rini
2024-05-02  1:30   ` [PATCH 23/81] ddr: " Tom Rini
2024-05-02  1:30   ` [PATCH 24/81] demo: " Tom Rini
2024-05-02  1:30   ` [PATCH 25/81] dfu: " Tom Rini
2024-05-02  7:28     ` Mattijs Korpershoek
2024-05-02 14:45       ` Tom Rini
2024-05-02  1:30   ` [PATCH 26/81] dma: " Tom Rini
2024-05-02  1:30   ` [PATCH 27/81] extcon: " Tom Rini
2024-05-02  1:30   ` [PATCH 28/81] fastboot: " Tom Rini
2024-05-02  7:29     ` Mattijs Korpershoek
2024-05-02  1:30   ` [PATCH 29/81] firmware: " Tom Rini
2024-05-07  7:37     ` Ilias Apalodimas
2024-05-02  1:30   ` [PATCH 30/81] fpga: " Tom Rini
2024-05-02  1:30   ` [PATCH 31/81] fuzz: " Tom Rini
2024-05-02  1:30   ` [PATCH 32/81] fwu-mdata: " Tom Rini
2024-05-02 13:15     ` Jassi Brar
2024-05-07  7:39     ` Ilias Apalodimas
2024-05-02  1:30   ` [PATCH 33/81] gpio: " Tom Rini
2024-05-02 11:10     ` Peter Robinson
2024-05-03  3:58     ` Heiko Schocher
2024-05-09  9:09     ` Stefan Bosch
2024-05-10  0:40     ` Kever Yang
2024-05-02  1:30   ` [PATCH 34/81] hwspinlock: " Tom Rini
2024-05-02  1:30   ` [PATCH 35/81] i2c: " Tom Rini
2024-05-03  3:58     ` Heiko Schocher
2024-05-09  9:09     ` Stefan Bosch
2024-05-02  1:30   ` [PATCH 36/81] input: " Tom Rini
2024-05-02  1:30   ` [PATCH 37/81] iommu: " Tom Rini
2024-05-02  1:30   ` [PATCH 38/81] led: " Tom Rini
2024-05-02  1:30   ` [PATCH 39/81] mailbox: " Tom Rini
2024-05-02  1:30   ` [PATCH 40/81] memory: " Tom Rini
2024-05-02  1:30   ` [PATCH 41/81] misc: " Tom Rini
2024-05-10  0:40     ` Kever Yang
2024-05-02  1:30   ` [PATCH 42/81] mmc: " Tom Rini
2024-05-02 11:10     ` Peter Robinson
2024-05-03  2:31     ` Jaehoon Chung
2024-05-10  0:41     ` Kever Yang
2024-05-02  1:31   ` [PATCH 43/81] mtd: " Tom Rini
2024-05-03  4:21     ` William Zhang
2024-05-02  1:31   ` [PATCH 44/81] mux: " Tom Rini
2024-05-02  1:31   ` [PATCH 45/81] net: " Tom Rini
2024-05-10  0:41     ` Kever Yang
2024-05-02  1:31   ` [PATCH 46/81] nvme: " Tom Rini
2024-05-02  1:31   ` [PATCH 47/81] pch: " Tom Rini
2024-05-02  1:31   ` [PATCH 48/81] pci: " Tom Rini
2024-05-03  3:59     ` Heiko Schocher
2024-05-10  0:42     ` Kever Yang
2024-05-02  1:31   ` [PATCH 49/81] pci_endpoint: " Tom Rini
2024-05-02  1:31   ` [PATCH 50/81] phy: " Tom Rini
2024-05-09  9:10     ` Stefan Bosch
2024-05-10  0:42     ` Kever Yang
2024-05-02  1:31   ` [PATCH 51/81] pinctrl: " Tom Rini
2024-05-02 11:11     ` Peter Robinson
2024-05-09  9:10     ` Stefan Bosch
2024-05-10  0:42     ` Kever Yang
2024-05-02  1:31   ` [PATCH 52/81] power: " Tom Rini
2024-05-10  0:43     ` Kever Yang
2024-05-02  1:31   ` [PATCH 53/81] pwm: " Tom Rini
2024-05-09  9:11     ` Stefan Bosch
2024-05-02  1:31   ` [PATCH 54/81] ram: " Tom Rini
2024-05-10  0:43     ` Kever Yang
2024-05-02  1:31   ` [PATCH 55/81] reboot-mode: " Tom Rini
2024-05-02  1:31   ` [PATCH 56/81] remoteproc: " Tom Rini
2024-05-02  1:31   ` [PATCH 57/81] reset: " Tom Rini
2024-05-10  0:43     ` Kever Yang
2024-05-02  1:31   ` [PATCH 58/81] rtc: " Tom Rini
2024-05-02  1:31   ` [PATCH 59/81] scsi: " Tom Rini
2024-05-02  1:31   ` [PATCH 60/81] serial: " Tom Rini
2024-05-02 11:11     ` Peter Robinson
2024-05-09  9:12     ` Stefan Bosch
2024-05-02  1:31   ` [PATCH 61/81] sm: " Tom Rini
2024-05-02  1:31   ` [PATCH 62/81] smem: " Tom Rini
2024-05-02  1:31   ` [PATCH 63/81] soc: " Tom Rini
2024-05-03 14:44     ` Bryan Brattlof
2024-05-02  1:31   ` [PATCH 64/81] sound: " Tom Rini
2024-05-10  0:44     ` Kever Yang
2024-05-02  1:31   ` [PATCH 65/81] spi: " Tom Rini
2024-05-03  4:25     ` William Zhang
2024-05-03  5:47     ` Cédric Le Goater
2024-05-02  1:31   ` [PATCH 66/81] spmi: " Tom Rini
2024-05-02  1:31   ` [PATCH 67/81] sysinfo: " Tom Rini
2024-05-02  1:31   ` [PATCH 68/81] sysreset: " Tom Rini
2024-05-10  0:44     ` Kever Yang
2024-05-02  1:31   ` [PATCH 69/81] thermal: " Tom Rini
2024-05-02  1:31   ` [PATCH 70/81] timer: " Tom Rini
2024-05-10  0:44     ` Kever Yang
2024-05-02  1:31   ` [PATCH 71/81] tpm: " Tom Rini
2024-05-07  7:36     ` Ilias Apalodimas
2024-05-02  1:31   ` [PATCH 72/81] ufs: " Tom Rini
2024-05-02  1:31   ` [PATCH 73/81] usb: " Tom Rini
2024-05-02  7:40     ` Mattijs Korpershoek
2024-05-02 14:51       ` Tom Rini
2024-05-03  7:20         ` Mattijs Korpershoek
2024-05-04 17:09     ` E Shattow
2024-05-04 18:33       ` Tom Rini
2024-05-02  1:31   ` [PATCH 74/81] video: " Tom Rini
2024-05-02 11:14     ` Peter Robinson
2024-05-09  9:13     ` Stefan Bosch
2024-05-10  0:45     ` Kever Yang
2024-05-02  1:31   ` [PATCH 75/81] virtio: " Tom Rini
2024-05-02  1:31   ` [PATCH 76/81] w1: " Tom Rini
2024-05-02  1:31   ` [PATCH 77/81] w1-eeprom: " Tom Rini
2024-05-02  1:31   ` [PATCH 78/81] watchdog: " Tom Rini
2024-05-02  6:49     ` Angelo Dureghello
2024-05-02  1:31   ` [PATCH 79/81] xen: " Tom Rini
2024-05-02  1:31   ` [PATCH 80/81] api: " Tom Rini
2024-05-02  1:31   ` [PATCH 81/81] common.h: Remove this file and all references Tom Rini
2024-05-03  2:29   ` [PATCH 01/81] mmc: Migrate MMC_SUPPORTS_TUNING to Kconfig Jaehoon Chung
2024-05-07 14:02   ` Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240502013138.2383421-1-trini@konsulko.com \
    --to=trini@konsulko.com \
    --cc=GSS_MTK_Uboot_upstream@mediatek.com \
    --cc=jh80.chung@samsung.com \
    --cc=peng.fan@nxp.com \
    --cc=u-boot@lists.denx.de \
    --cc=weijie.gao@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox