[PATCH 03/27] common: doc: Drop old LED support

[Simon Glass <sjg@chromium.org>]

This has been replaced with a new LED framework, so drop this old code
and documentation.

Signed-off-by: Simon Glass <sjg@chromium.org>
---

 common/board_f.c | 22 --------------
 doc/README.LED   | 77 ------------------------------------------------
 2 files changed, 99 deletions(-)
 delete mode 100644 doc/README.LED

diff --git a/common/board_f.c b/common/board_f.c
index 154675d0e40..f161a690ec0 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -36,7 +36,6 @@
 #include <relocate.h>
 #include <serial.h>
 #include <spl.h>
-#include <status_led.h>
 #include <sysreset.h>
 #include <timer.h>
 #include <trace.h>
@@ -53,27 +52,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-/*
- * TODO(sjg@chromium.org): IMO this code should be
- * refactored to a single function, something like:
- *
- * void led_set_state(enum led_colour_t colour, int on);
- */
-/************************************************************************
- * Coloured LED functionality
- ************************************************************************
- * May be supplied by boards if desired
- */
-__weak void coloured_LED_init(void) {}
-__weak void red_led_on(void) {}
-__weak void red_led_off(void) {}
-__weak void green_led_on(void) {}
-__weak void green_led_off(void) {}
-__weak void yellow_led_on(void) {}
-__weak void yellow_led_off(void) {}
-__weak void blue_led_on(void) {}
-__weak void blue_led_off(void) {}
-
 /*
  * Why is gd allocated a register? Prior to reloc it might be better to
  * just pass it around to each function in this file?
diff --git a/doc/README.LED b/doc/README.LED
deleted file mode 100644
index c21c9d53ec3..00000000000
--- a/doc/README.LED
+++ /dev/null
@@ -1,77 +0,0 @@
-Status LED
-========================================
-
-This README describes the status LED API.
-
-The API is defined by the include file include/status_led.h
-
-The first step is to enable CONFIG_LED_STATUS in menuconfig:
-> Device Drivers > LED Support.
-
-If the LED support is only for specific board, enable
-CONFIG_LED_STATUS_BOARD_SPECIFIC in the menuconfig.
-
-Status LEDS 0 to 5 are enabled by the following configurations at menuconfig:
-CONFIG_STATUS_LED0, CONFIG_STATUS_LED1, ... CONFIG_STATUS_LED5
-
-The following should be configured for each of the enabled LEDs:
-CONFIG_STATUS_LED_BIT<n>
-CONFIG_STATUS_LED_STATE<n>
-CONFIG_STATUS_LED_FREQ<n>
-Where <n> is an integer 1 through 5 (empty for 0).
-
-CONFIG_STATUS_LED_BIT is passed into the __led_* functions to identify which LED
-is being acted on. As such, the value choose must be unique with with respect to
-the other CONFIG_STATUS_LED_BIT's. Mapping the value to a physical LED is the
-reponsiblity of the __led_* function.
-
-CONFIG_STATUS_LED_STATE is the initial state of the LED. It should be set to one
-of these values: CONFIG_LED_STATUS_OFF or CONFIG_LED_STATUS_ON.
-
-CONFIG_STATUS_LED_FREQ determines the LED blink frequency.
-Values range from 2 to 10.
-
-Some other LED macros
----------------------
-
-CONFIG_STATUS_LED_BOOT is the LED to light when the board is booting.
-This must be a valid LED number (0-5).
-
-CONFIG_STATUS_LED_RED is the red LED. It is used to signal errors. This must be
-a valid LED number (0-5). Other similar color LED's macros are
-CONFIG_STATUS_LED_GREEN, CONFIG_STATUS_LED_YELLOW and CONFIG_STATUS_LED_BLUE.
-
-General LED functions
----------------------
-The following functions should be defined:
-
-__led_init is called once to initialize the LED to CONFIG_STATUS_LED_STATE.
-One time start up code should be placed here.
-
-__led_set is called to change the state of the LED.
-
-__led_toggle is called to toggle the current state of the LED.
-
-Colour LED
-========================================
-
-Colour LED's are at present only used by ARM.
-
-The functions names explain their purpose.
-
-coloured_LED_init
-red_LED_on
-red_LED_off
-green_LED_on
-green_LED_off
-yellow_LED_on
-yellow_LED_off
-blue_LED_on
-blue_LED_off
-
-These are weakly defined in arch/arm/lib/board.c to noops. Where applicable, define
-these functions in the board specific source.
-
-TBD : Describe older board dependent macros similar to what is done for
-
-TBD : Describe general support via asm/status_led.h
-- 
2.43.0