* [PATCH v2 0/4] Broadcom BCMBCA nand updates
@ 2024-11-13 6:27 david regan
2024-11-13 6:27 ` [PATCH v2 1/4] mtd: nand: brcmnand: remove device specific nand driver files david regan
` (4 more replies)
0 siblings, 5 replies; 7+ messages in thread
From: david regan @ 2024-11-13 6:27 UTC (permalink / raw)
To: u-boot, Dario Binacchi, Michael Trimarchi, Anand Gore,
William Zhang, Kursad Oney, Philippe Reynes, Linus Walleij,
Florian Fainelli, Miquel Raynal, Kamal Dasu, Tom Rini,
Jiaxun Yang, dregan, dregan
These are ports of upstream Linux patches to U-Boot.
Remove device specific nand driver files as they are now replaced
by a common driver bcmbca_nand.c
Make use of OF_UPSTREAM which uses Linux dts.
Implement a minimal set of defconfig options to enable basic NAND
functionality. Tested on:
47622
63146
63158
63178
6813
Set parameter_page_big_endian to zero for bcmbca.
Update log level messages so that more critical messages can be logged
to console and help the troubleshooting with field devices.
https://lore.kernel.org/linux-mtd/20240223034758.13753-4-william.zhang@broadcom.com/
---
Changes in v2:
- Set parameter_page_big_endian to zero for bcmbca instead of
using an extra bit of endian translation code.
david regan (4):
mtd: nand: brcmnand: remove device specific nand driver files
arm: dts: Use upstream dts
mtd: rawnand: brcmnand: Default bcmbca parameter_page_big_endian to
zero
mtd: rawnand: brcmnand: update log level messages
arch/arm/dts/bcm47622.dtsi | 126 --------
arch/arm/dts/bcm4912.dtsi | 128 --------
arch/arm/dts/bcm63146.dtsi | 110 -------
arch/arm/dts/bcm63158.dtsi | 278 ------------------
arch/arm/dts/bcm63178.dtsi | 120 --------
arch/arm/dts/bcm6756.dtsi | 130 --------
arch/arm/dts/bcm6813.dtsi | 128 --------
arch/arm/dts/bcm6855.dtsi | 257 ----------------
arch/arm/dts/bcm6856.dtsi | 253 ----------------
arch/arm/dts/bcm6858.dtsi | 272 -----------------
arch/arm/dts/bcm6878.dtsi | 111 -------
arch/arm/dts/bcm947622.dts | 30 --
arch/arm/dts/bcm94912.dts | 30 --
arch/arm/dts/bcm963146.dts | 30 --
arch/arm/dts/bcm963158.dts | 30 --
arch/arm/dts/bcm963178.dts | 30 --
arch/arm/dts/bcm96756.dts | 30 --
arch/arm/dts/bcm96813.dts | 30 --
arch/arm/dts/bcm96855.dts | 30 --
arch/arm/dts/bcm96856.dts | 30 --
arch/arm/dts/bcm96858.dts | 30 --
arch/arm/dts/bcm96878.dts | 30 --
arch/arm/mach-bcmbca/bcm47622/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm4912/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm63146/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm63158/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm63178/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm6756/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm6813/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm6855/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm6856/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm6858/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm6878/Kconfig | 1 +
configs/bcm947622_defconfig | 11 +-
configs/bcm94912_defconfig | 11 +-
configs/bcm963146_defconfig | 11 +-
configs/bcm963158_defconfig | 11 +-
configs/bcm963178_defconfig | 11 +-
configs/bcm96756_defconfig | 11 +-
configs/bcm96813_defconfig | 11 +-
configs/bcm96855_defconfig | 11 +-
configs/bcm96856_defconfig | 11 +-
configs/bcm96858_defconfig | 11 +-
configs/bcm96878_defconfig | 11 +-
drivers/mtd/nand/raw/Kconfig | 24 --
drivers/mtd/nand/raw/brcmnand/Makefile | 4 -
drivers/mtd/nand/raw/brcmnand/bcm63158_nand.c | 125 --------
drivers/mtd/nand/raw/brcmnand/bcm6753_nand.c | 123 --------
drivers/mtd/nand/raw/brcmnand/bcm68360_nand.c | 124 --------
drivers/mtd/nand/raw/brcmnand/bcm6858_nand.c | 125 --------
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 14 +-
51 files changed, 132 insertions(+), 2782 deletions(-)
delete mode 100644 arch/arm/dts/bcm47622.dtsi
delete mode 100644 arch/arm/dts/bcm4912.dtsi
delete mode 100644 arch/arm/dts/bcm63146.dtsi
delete mode 100644 arch/arm/dts/bcm63158.dtsi
delete mode 100644 arch/arm/dts/bcm63178.dtsi
delete mode 100644 arch/arm/dts/bcm6756.dtsi
delete mode 100644 arch/arm/dts/bcm6813.dtsi
delete mode 100644 arch/arm/dts/bcm6855.dtsi
delete mode 100644 arch/arm/dts/bcm6856.dtsi
delete mode 100644 arch/arm/dts/bcm6858.dtsi
delete mode 100644 arch/arm/dts/bcm6878.dtsi
delete mode 100644 arch/arm/dts/bcm947622.dts
delete mode 100644 arch/arm/dts/bcm94912.dts
delete mode 100644 arch/arm/dts/bcm963146.dts
delete mode 100644 arch/arm/dts/bcm963158.dts
delete mode 100644 arch/arm/dts/bcm963178.dts
delete mode 100644 arch/arm/dts/bcm96756.dts
delete mode 100644 arch/arm/dts/bcm96813.dts
delete mode 100644 arch/arm/dts/bcm96855.dts
delete mode 100644 arch/arm/dts/bcm96856.dts
delete mode 100644 arch/arm/dts/bcm96858.dts
delete mode 100644 arch/arm/dts/bcm96878.dts
delete mode 100644 drivers/mtd/nand/raw/brcmnand/bcm63158_nand.c
delete mode 100644 drivers/mtd/nand/raw/brcmnand/bcm6753_nand.c
delete mode 100644 drivers/mtd/nand/raw/brcmnand/bcm68360_nand.c
delete mode 100644 drivers/mtd/nand/raw/brcmnand/bcm6858_nand.c
--
2.37.3
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v2 1/4] mtd: nand: brcmnand: remove device specific nand driver files
2024-11-13 6:27 [PATCH v2 0/4] Broadcom BCMBCA nand updates david regan
@ 2024-11-13 6:27 ` david regan
2024-11-13 6:27 ` [PATCH v2 2/4] arm: dts: Use upstream dts david regan
` (3 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: david regan @ 2024-11-13 6:27 UTC (permalink / raw)
To: u-boot, Dario Binacchi, Michael Trimarchi, Anand Gore,
William Zhang, Kursad Oney, Philippe Reynes, Linus Walleij,
Florian Fainelli, Miquel Raynal, Kamal Dasu, Tom Rini,
Jiaxun Yang, dregan, dregan
These device specific nand driver files can be removed because
they are now replaced by a common driver bcmbca_nand.c
Signed-off-by: david regan <dregan@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Anand Gore <anand.gore@broadcom.com>
---
drivers/mtd/nand/raw/Kconfig | 24 ----
drivers/mtd/nand/raw/brcmnand/Makefile | 4 -
drivers/mtd/nand/raw/brcmnand/bcm63158_nand.c | 125 ------------------
drivers/mtd/nand/raw/brcmnand/bcm6753_nand.c | 123 -----------------
drivers/mtd/nand/raw/brcmnand/bcm68360_nand.c | 124 -----------------
drivers/mtd/nand/raw/brcmnand/bcm6858_nand.c | 125 ------------------
6 files changed, 525 deletions(-)
delete mode 100644 drivers/mtd/nand/raw/brcmnand/bcm63158_nand.c
delete mode 100644 drivers/mtd/nand/raw/brcmnand/bcm6753_nand.c
delete mode 100644 drivers/mtd/nand/raw/brcmnand/bcm68360_nand.c
delete mode 100644 drivers/mtd/nand/raw/brcmnand/bcm6858_nand.c
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index c345fc1f1fba..609bdffbf779 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -133,36 +133,12 @@ config NAND_BRCMNAND_6368
help
Enable support for broadcom nand driver on bcm6368.
-config NAND_BRCMNAND_6753
- bool "Support Broadcom NAND controller on bcm6753"
- depends on NAND_BRCMNAND && BCM6855
- help
- Enable support for broadcom nand driver on bcm6753.
-
-config NAND_BRCMNAND_68360
- bool "Support Broadcom NAND controller on bcm68360"
- depends on NAND_BRCMNAND && BCM6856
- help
- Enable support for broadcom nand driver on bcm68360.
-
config NAND_BRCMNAND_6838
bool "Support Broadcom NAND controller on bcm6838"
depends on NAND_BRCMNAND && ARCH_BMIPS && SOC_BMIPS_BCM6838
help
Enable support for broadcom nand driver on bcm6838.
-config NAND_BRCMNAND_6858
- bool "Support Broadcom NAND controller on bcm6858"
- depends on NAND_BRCMNAND && BCM6858
- help
- Enable support for broadcom nand driver on bcm6858.
-
-config NAND_BRCMNAND_63158
- bool "Support Broadcom NAND controller on bcm63158"
- depends on NAND_BRCMNAND && BCM63158
- help
- Enable support for broadcom nand driver on bcm63158.
-
config NAND_BRCMNAND_IPROC
bool "Support Broadcom NAND controller on the iproc family"
depends on NAND_BRCMNAND
diff --git a/drivers/mtd/nand/raw/brcmnand/Makefile b/drivers/mtd/nand/raw/brcmnand/Makefile
index 24d0d5684490..4fba5c1c7e3d 100644
--- a/drivers/mtd/nand/raw/brcmnand/Makefile
+++ b/drivers/mtd/nand/raw/brcmnand/Makefile
@@ -1,11 +1,7 @@
# SPDX-License-Identifier: GPL-2.0+
obj-$(CONFIG_NAND_BRCMNAND_6368) += bcm6368_nand.o
-obj-$(CONFIG_NAND_BRCMNAND_63158) += bcm63158_nand.o
-obj-$(CONFIG_NAND_BRCMNAND_6753) += bcm6753_nand.o
-obj-$(CONFIG_NAND_BRCMNAND_68360) += bcm68360_nand.o
obj-$(CONFIG_NAND_BRCMNAND_6838) += bcm6838_nand.o
-obj-$(CONFIG_NAND_BRCMNAND_6858) += bcm6858_nand.o
obj-$(CONFIG_NAND_BRCMNAND_BCMBCA) += bcmbca_nand.o
obj-$(CONFIG_NAND_BRCMNAND_IPROC) += iproc_nand.o
obj-$(CONFIG_NAND_BRCMNAND) += brcmnand.o
diff --git a/drivers/mtd/nand/raw/brcmnand/bcm63158_nand.c b/drivers/mtd/nand/raw/brcmnand/bcm63158_nand.c
deleted file mode 100644
index 3f59fbbbb8f1..000000000000
--- a/drivers/mtd/nand/raw/brcmnand/bcm63158_nand.c
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-#include <asm/io.h>
-#include <memalign.h>
-#include <nand.h>
-#include <linux/bitops.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <dm.h>
-#include <linux/printk.h>
-
-#include "brcmnand.h"
-
-struct bcm63158_nand_soc {
- struct brcmnand_soc soc;
- void __iomem *base;
-};
-
-#define BCM63158_NAND_INT 0x00
-#define BCM63158_NAND_STATUS_SHIFT 0
-#define BCM63158_NAND_STATUS_MASK (0xfff << BCM63158_NAND_STATUS_SHIFT)
-
-#define BCM63158_NAND_INT_EN 0x04
-#define BCM63158_NAND_ENABLE_SHIFT 0
-#define BCM63158_NAND_ENABLE_MASK (0xffff << BCM63158_NAND_ENABLE_SHIFT)
-
-enum {
- BCM63158_NP_READ = BIT(0),
- BCM63158_BLOCK_ERASE = BIT(1),
- BCM63158_COPY_BACK = BIT(2),
- BCM63158_PAGE_PGM = BIT(3),
- BCM63158_CTRL_READY = BIT(4),
- BCM63158_DEV_RBPIN = BIT(5),
- BCM63158_ECC_ERR_UNC = BIT(6),
- BCM63158_ECC_ERR_CORR = BIT(7),
-};
-
-static bool bcm63158_nand_intc_ack(struct brcmnand_soc *soc)
-{
- struct bcm63158_nand_soc *priv =
- container_of(soc, struct bcm63158_nand_soc, soc);
- void __iomem *mmio = priv->base + BCM63158_NAND_INT;
- u32 val = brcmnand_readl(mmio);
-
- if (val & (BCM63158_CTRL_READY << BCM63158_NAND_STATUS_SHIFT)) {
- /* Ack interrupt */
- val &= ~BCM63158_NAND_STATUS_MASK;
- val |= BCM63158_CTRL_READY << BCM63158_NAND_STATUS_SHIFT;
- brcmnand_writel(val, mmio);
- return true;
- }
-
- return false;
-}
-
-static void bcm63158_nand_intc_set(struct brcmnand_soc *soc, bool en)
-{
- struct bcm63158_nand_soc *priv =
- container_of(soc, struct bcm63158_nand_soc, soc);
- void __iomem *mmio = priv->base + BCM63158_NAND_INT_EN;
- u32 val = brcmnand_readl(mmio);
-
- /* Don't ack any interrupts */
- val &= ~BCM63158_NAND_STATUS_MASK;
-
- if (en)
- val |= BCM63158_CTRL_READY << BCM63158_NAND_ENABLE_SHIFT;
- else
- val &= ~(BCM63158_CTRL_READY << BCM63158_NAND_ENABLE_SHIFT);
-
- brcmnand_writel(val, mmio);
-}
-
-static int bcm63158_nand_probe(struct udevice *dev)
-{
- struct udevice *pdev = dev;
- struct bcm63158_nand_soc *priv = dev_get_priv(dev);
- struct brcmnand_soc *soc;
- struct resource res;
-
- soc = &priv->soc;
-
- dev_read_resource_byname(pdev, "nand-int-base", &res);
- priv->base = devm_ioremap(dev, res.start, resource_size(&res));
- if (IS_ERR(priv->base))
- return PTR_ERR(priv->base);
-
- soc->ctlrdy_ack = bcm63158_nand_intc_ack;
- soc->ctlrdy_set_enabled = bcm63158_nand_intc_set;
-
- /* Disable and ack all interrupts */
- brcmnand_writel(0, priv->base + BCM63158_NAND_INT_EN);
- brcmnand_writel(0, priv->base + BCM63158_NAND_INT);
-
- return brcmnand_probe(pdev, soc);
-}
-
-static const struct udevice_id bcm63158_nand_dt_ids[] = {
- {
- .compatible = "brcm,nand-bcm63158",
- },
- { /* sentinel */ }
-};
-
-U_BOOT_DRIVER(bcm63158_nand) = {
- .name = "bcm63158-nand",
- .id = UCLASS_MTD,
- .of_match = bcm63158_nand_dt_ids,
- .probe = bcm63158_nand_probe,
- .priv_auto = sizeof(struct bcm63158_nand_soc),
-};
-
-void board_nand_init(void)
-{
- struct udevice *dev;
- int ret;
-
- ret = uclass_get_device_by_driver(UCLASS_MTD,
- DM_DRIVER_GET(bcm63158_nand), &dev);
- if (ret && ret != -ENODEV)
- pr_err("Failed to initialize %s. (error %d)\n", dev->name,
- ret);
-}
diff --git a/drivers/mtd/nand/raw/brcmnand/bcm6753_nand.c b/drivers/mtd/nand/raw/brcmnand/bcm6753_nand.c
deleted file mode 100644
index a101222a28fa..000000000000
--- a/drivers/mtd/nand/raw/brcmnand/bcm6753_nand.c
+++ /dev/null
@@ -1,123 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-#include <asm/io.h>
-#include <memalign.h>
-#include <nand.h>
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <dm.h>
-
-#include "brcmnand.h"
-
-struct bcm6753_nand_soc {
- struct brcmnand_soc soc;
- void __iomem *base;
-};
-
-#define BCM6753_NAND_INT 0x00
-#define BCM6753_NAND_STATUS_SHIFT 0
-#define BCM6753_NAND_STATUS_MASK (0xfff << BCM6753_NAND_STATUS_SHIFT)
-
-#define BCM6753_NAND_INT_EN 0x04
-#define BCM6753_NAND_ENABLE_SHIFT 0
-#define BCM6753_NAND_ENABLE_MASK (0xffff << BCM6753_NAND_ENABLE_SHIFT)
-
-enum {
- BCM6753_NP_READ = BIT(0),
- BCM6753_BLOCK_ERASE = BIT(1),
- BCM6753_COPY_BACK = BIT(2),
- BCM6753_PAGE_PGM = BIT(3),
- BCM6753_CTRL_READY = BIT(4),
- BCM6753_DEV_RBPIN = BIT(5),
- BCM6753_ECC_ERR_UNC = BIT(6),
- BCM6753_ECC_ERR_CORR = BIT(7),
-};
-
-static bool bcm6753_nand_intc_ack(struct brcmnand_soc *soc)
-{
- struct bcm6753_nand_soc *priv =
- container_of(soc, struct bcm6753_nand_soc, soc);
- void __iomem *mmio = priv->base + BCM6753_NAND_INT;
- u32 val = brcmnand_readl(mmio);
-
- if (val & (BCM6753_CTRL_READY << BCM6753_NAND_STATUS_SHIFT)) {
- /* Ack interrupt */
- val &= ~BCM6753_NAND_STATUS_MASK;
- val |= BCM6753_CTRL_READY << BCM6753_NAND_STATUS_SHIFT;
- brcmnand_writel(val, mmio);
- return true;
- }
-
- return false;
-}
-
-static void bcm6753_nand_intc_set(struct brcmnand_soc *soc, bool en)
-{
- struct bcm6753_nand_soc *priv =
- container_of(soc, struct bcm6753_nand_soc, soc);
- void __iomem *mmio = priv->base + BCM6753_NAND_INT_EN;
- u32 val = brcmnand_readl(mmio);
-
- /* Don't ack any interrupts */
- val &= ~BCM6753_NAND_STATUS_MASK;
-
- if (en)
- val |= BCM6753_CTRL_READY << BCM6753_NAND_ENABLE_SHIFT;
- else
- val &= ~(BCM6753_CTRL_READY << BCM6753_NAND_ENABLE_SHIFT);
-
- brcmnand_writel(val, mmio);
-}
-
-static int bcm6753_nand_probe(struct udevice *dev)
-{
- struct udevice *pdev = dev;
- struct bcm6753_nand_soc *priv = dev_get_priv(dev);
- struct brcmnand_soc *soc;
- struct resource res;
-
- soc = &priv->soc;
-
- dev_read_resource_byname(pdev, "nand-int-base", &res);
- priv->base = devm_ioremap(dev, res.start, resource_size(&res));
- if (IS_ERR(priv->base))
- return PTR_ERR(priv->base);
-
- soc->ctlrdy_ack = bcm6753_nand_intc_ack;
- soc->ctlrdy_set_enabled = bcm6753_nand_intc_set;
-
- /* Disable and ack all interrupts */
- brcmnand_writel(0, priv->base + BCM6753_NAND_INT_EN);
- brcmnand_writel(0, priv->base + BCM6753_NAND_INT);
-
- return brcmnand_probe(pdev, soc);
-}
-
-static const struct udevice_id bcm6753_nand_dt_ids[] = {
- {
- .compatible = "brcm,nand-bcm6753",
- },
- { /* sentinel */ }
-};
-
-U_BOOT_DRIVER(bcm6753_nand) = {
- .name = "bcm6753-nand",
- .id = UCLASS_MTD,
- .of_match = bcm6753_nand_dt_ids,
- .probe = bcm6753_nand_probe,
- .priv_auto = sizeof(struct bcm6753_nand_soc),
-};
-
-void board_nand_init(void)
-{
- struct udevice *dev;
- int ret;
-
- ret = uclass_get_device_by_driver(UCLASS_MTD,
- DM_DRIVER_GET(bcm6753_nand), &dev);
- if (ret && ret != -ENODEV)
- pr_err("Failed to initialize %s. (error %d)\n", dev->name,
- ret);
-}
diff --git a/drivers/mtd/nand/raw/brcmnand/bcm68360_nand.c b/drivers/mtd/nand/raw/brcmnand/bcm68360_nand.c
deleted file mode 100644
index 385642d0c091..000000000000
--- a/drivers/mtd/nand/raw/brcmnand/bcm68360_nand.c
+++ /dev/null
@@ -1,124 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-#include <asm/io.h>
-#include <memalign.h>
-#include <nand.h>
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <dm.h>
-#include <linux/printk.h>
-
-#include "brcmnand.h"
-
-struct bcm68360_nand_soc {
- struct brcmnand_soc soc;
- void __iomem *base;
-};
-
-#define BCM68360_NAND_INT 0x00
-#define BCM68360_NAND_STATUS_SHIFT 0
-#define BCM68360_NAND_STATUS_MASK (0xfff << BCM68360_NAND_STATUS_SHIFT)
-
-#define BCM68360_NAND_INT_EN 0x04
-#define BCM68360_NAND_ENABLE_SHIFT 0
-#define BCM68360_NAND_ENABLE_MASK (0xffff << BCM68360_NAND_ENABLE_SHIFT)
-
-enum {
- BCM68360_NP_READ = BIT(0),
- BCM68360_BLOCK_ERASE = BIT(1),
- BCM68360_COPY_BACK = BIT(2),
- BCM68360_PAGE_PGM = BIT(3),
- BCM68360_CTRL_READY = BIT(4),
- BCM68360_DEV_RBPIN = BIT(5),
- BCM68360_ECC_ERR_UNC = BIT(6),
- BCM68360_ECC_ERR_CORR = BIT(7),
-};
-
-static bool bcm68360_nand_intc_ack(struct brcmnand_soc *soc)
-{
- struct bcm68360_nand_soc *priv =
- container_of(soc, struct bcm68360_nand_soc, soc);
- void __iomem *mmio = priv->base + BCM68360_NAND_INT;
- u32 val = brcmnand_readl(mmio);
-
- if (val & (BCM68360_CTRL_READY << BCM68360_NAND_STATUS_SHIFT)) {
- /* Ack interrupt */
- val &= ~BCM68360_NAND_STATUS_MASK;
- val |= BCM68360_CTRL_READY << BCM68360_NAND_STATUS_SHIFT;
- brcmnand_writel(val, mmio);
- return true;
- }
-
- return false;
-}
-
-static void bcm68360_nand_intc_set(struct brcmnand_soc *soc, bool en)
-{
- struct bcm68360_nand_soc *priv =
- container_of(soc, struct bcm68360_nand_soc, soc);
- void __iomem *mmio = priv->base + BCM68360_NAND_INT_EN;
- u32 val = brcmnand_readl(mmio);
-
- /* Don't ack any interrupts */
- val &= ~BCM68360_NAND_STATUS_MASK;
-
- if (en)
- val |= BCM68360_CTRL_READY << BCM68360_NAND_ENABLE_SHIFT;
- else
- val &= ~(BCM68360_CTRL_READY << BCM68360_NAND_ENABLE_SHIFT);
-
- brcmnand_writel(val, mmio);
-}
-
-static int bcm68360_nand_probe(struct udevice *dev)
-{
- struct udevice *pdev = dev;
- struct bcm68360_nand_soc *priv = dev_get_priv(dev);
- struct brcmnand_soc *soc;
- struct resource res;
-
- soc = &priv->soc;
-
- dev_read_resource_byname(pdev, "nand-int-base", &res);
- priv->base = devm_ioremap(dev, res.start, resource_size(&res));
- if (IS_ERR(priv->base))
- return PTR_ERR(priv->base);
-
- soc->ctlrdy_ack = bcm68360_nand_intc_ack;
- soc->ctlrdy_set_enabled = bcm68360_nand_intc_set;
-
- /* Disable and ack all interrupts */
- brcmnand_writel(0, priv->base + BCM68360_NAND_INT_EN);
- brcmnand_writel(0, priv->base + BCM68360_NAND_INT);
-
- return brcmnand_probe(pdev, soc);
-}
-
-static const struct udevice_id bcm68360_nand_dt_ids[] = {
- {
- .compatible = "brcm,nand-bcm68360",
- },
- { /* sentinel */ }
-};
-
-U_BOOT_DRIVER(bcm68360_nand) = {
- .name = "bcm68360-nand",
- .id = UCLASS_MTD,
- .of_match = bcm68360_nand_dt_ids,
- .probe = bcm68360_nand_probe,
- .priv_auto = sizeof(struct bcm68360_nand_soc),
-};
-
-void board_nand_init(void)
-{
- struct udevice *dev;
- int ret;
-
- ret = uclass_get_device_by_driver(UCLASS_MTD,
- DM_DRIVER_GET(bcm68360_nand), &dev);
- if (ret && ret != -ENODEV)
- pr_err("Failed to initialize %s. (error %d)\n", dev->name,
- ret);
-}
diff --git a/drivers/mtd/nand/raw/brcmnand/bcm6858_nand.c b/drivers/mtd/nand/raw/brcmnand/bcm6858_nand.c
deleted file mode 100644
index 564c678c9ef2..000000000000
--- a/drivers/mtd/nand/raw/brcmnand/bcm6858_nand.c
+++ /dev/null
@@ -1,125 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-#include <asm/io.h>
-#include <memalign.h>
-#include <nand.h>
-#include <linux/bitops.h>
-#include <linux/err.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <dm.h>
-#include <linux/printk.h>
-
-#include "brcmnand.h"
-
-struct bcm6858_nand_soc {
- struct brcmnand_soc soc;
- void __iomem *base;
-};
-
-#define BCM6858_NAND_INT 0x00
-#define BCM6858_NAND_STATUS_SHIFT 0
-#define BCM6858_NAND_STATUS_MASK (0xfff << BCM6858_NAND_STATUS_SHIFT)
-
-#define BCM6858_NAND_INT_EN 0x04
-#define BCM6858_NAND_ENABLE_SHIFT 0
-#define BCM6858_NAND_ENABLE_MASK (0xffff << BCM6858_NAND_ENABLE_SHIFT)
-
-enum {
- BCM6858_NP_READ = BIT(0),
- BCM6858_BLOCK_ERASE = BIT(1),
- BCM6858_COPY_BACK = BIT(2),
- BCM6858_PAGE_PGM = BIT(3),
- BCM6858_CTRL_READY = BIT(4),
- BCM6858_DEV_RBPIN = BIT(5),
- BCM6858_ECC_ERR_UNC = BIT(6),
- BCM6858_ECC_ERR_CORR = BIT(7),
-};
-
-static bool bcm6858_nand_intc_ack(struct brcmnand_soc *soc)
-{
- struct bcm6858_nand_soc *priv =
- container_of(soc, struct bcm6858_nand_soc, soc);
- void __iomem *mmio = priv->base + BCM6858_NAND_INT;
- u32 val = brcmnand_readl(mmio);
-
- if (val & (BCM6858_CTRL_READY << BCM6858_NAND_STATUS_SHIFT)) {
- /* Ack interrupt */
- val &= ~BCM6858_NAND_STATUS_MASK;
- val |= BCM6858_CTRL_READY << BCM6858_NAND_STATUS_SHIFT;
- brcmnand_writel(val, mmio);
- return true;
- }
-
- return false;
-}
-
-static void bcm6858_nand_intc_set(struct brcmnand_soc *soc, bool en)
-{
- struct bcm6858_nand_soc *priv =
- container_of(soc, struct bcm6858_nand_soc, soc);
- void __iomem *mmio = priv->base + BCM6858_NAND_INT_EN;
- u32 val = brcmnand_readl(mmio);
-
- /* Don't ack any interrupts */
- val &= ~BCM6858_NAND_STATUS_MASK;
-
- if (en)
- val |= BCM6858_CTRL_READY << BCM6858_NAND_ENABLE_SHIFT;
- else
- val &= ~(BCM6858_CTRL_READY << BCM6858_NAND_ENABLE_SHIFT);
-
- brcmnand_writel(val, mmio);
-}
-
-static int bcm6858_nand_probe(struct udevice *dev)
-{
- struct udevice *pdev = dev;
- struct bcm6858_nand_soc *priv = dev_get_priv(dev);
- struct brcmnand_soc *soc;
- struct resource res;
-
- soc = &priv->soc;
-
- dev_read_resource_byname(pdev, "nand-int-base", &res);
- priv->base = devm_ioremap(dev, res.start, resource_size(&res));
- if (IS_ERR(priv->base))
- return PTR_ERR(priv->base);
-
- soc->ctlrdy_ack = bcm6858_nand_intc_ack;
- soc->ctlrdy_set_enabled = bcm6858_nand_intc_set;
-
- /* Disable and ack all interrupts */
- brcmnand_writel(0, priv->base + BCM6858_NAND_INT_EN);
- brcmnand_writel(0, priv->base + BCM6858_NAND_INT);
-
- return brcmnand_probe(pdev, soc);
-}
-
-static const struct udevice_id bcm6858_nand_dt_ids[] = {
- {
- .compatible = "brcm,nand-bcm6858",
- },
- { /* sentinel */ }
-};
-
-U_BOOT_DRIVER(bcm6858_nand) = {
- .name = "bcm6858-nand",
- .id = UCLASS_MTD,
- .of_match = bcm6858_nand_dt_ids,
- .probe = bcm6858_nand_probe,
- .priv_auto = sizeof(struct bcm6858_nand_soc),
-};
-
-void board_nand_init(void)
-{
- struct udevice *dev;
- int ret;
-
- ret = uclass_get_device_by_driver(UCLASS_MTD,
- DM_DRIVER_GET(bcm6858_nand), &dev);
- if (ret && ret != -ENODEV)
- pr_err("Failed to initialize %s. (error %d)\n", dev->name,
- ret);
-}
--
2.37.3
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2 2/4] arm: dts: Use upstream dts
2024-11-13 6:27 [PATCH v2 0/4] Broadcom BCMBCA nand updates david regan
2024-11-13 6:27 ` [PATCH v2 1/4] mtd: nand: brcmnand: remove device specific nand driver files david regan
@ 2024-11-13 6:27 ` david regan
2024-11-13 6:27 ` [PATCH v2 3/4] mtd: rawnand: brcmnand: Default bcmbca parameter_page_big_endian to zero david regan
` (2 subsequent siblings)
4 siblings, 0 replies; 7+ messages in thread
From: david regan @ 2024-11-13 6:27 UTC (permalink / raw)
To: u-boot, Dario Binacchi, Michael Trimarchi, Anand Gore,
William Zhang, Kursad Oney, Philippe Reynes, Linus Walleij,
Florian Fainelli, Miquel Raynal, Kamal Dasu, Tom Rini,
Jiaxun Yang, dregan, dregan
Make use of OF_UPSTREAM which uses Linux dts.
Signed-off-by: david regan <dregan@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Anand Gore <anand.gore@broadcom.com>
---
arch/arm/dts/bcm47622.dtsi | 126 ------------
arch/arm/dts/bcm4912.dtsi | 128 ------------
arch/arm/dts/bcm63146.dtsi | 110 ----------
arch/arm/dts/bcm63158.dtsi | 278 --------------------------
arch/arm/dts/bcm63178.dtsi | 120 -----------
arch/arm/dts/bcm6756.dtsi | 130 ------------
arch/arm/dts/bcm6813.dtsi | 128 ------------
arch/arm/dts/bcm6855.dtsi | 257 ------------------------
arch/arm/dts/bcm6856.dtsi | 253 -----------------------
arch/arm/dts/bcm6858.dtsi | 272 -------------------------
arch/arm/dts/bcm6878.dtsi | 111 ----------
arch/arm/dts/bcm947622.dts | 30 ---
arch/arm/dts/bcm94912.dts | 30 ---
arch/arm/dts/bcm963146.dts | 30 ---
arch/arm/dts/bcm963158.dts | 30 ---
arch/arm/dts/bcm963178.dts | 30 ---
arch/arm/dts/bcm96756.dts | 30 ---
arch/arm/dts/bcm96813.dts | 30 ---
arch/arm/dts/bcm96855.dts | 30 ---
arch/arm/dts/bcm96856.dts | 30 ---
arch/arm/dts/bcm96858.dts | 30 ---
arch/arm/dts/bcm96878.dts | 30 ---
arch/arm/mach-bcmbca/bcm47622/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm4912/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm63146/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm63158/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm63178/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm6756/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm6813/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm6855/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm6856/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm6858/Kconfig | 1 +
arch/arm/mach-bcmbca/bcm6878/Kconfig | 1 +
configs/bcm947622_defconfig | 11 +-
configs/bcm94912_defconfig | 11 +-
configs/bcm963146_defconfig | 11 +-
configs/bcm963158_defconfig | 11 +-
configs/bcm963178_defconfig | 11 +-
configs/bcm96756_defconfig | 11 +-
configs/bcm96813_defconfig | 11 +-
configs/bcm96855_defconfig | 11 +-
configs/bcm96856_defconfig | 11 +-
configs/bcm96858_defconfig | 11 +-
configs/bcm96878_defconfig | 11 +-
44 files changed, 121 insertions(+), 2254 deletions(-)
delete mode 100644 arch/arm/dts/bcm47622.dtsi
delete mode 100644 arch/arm/dts/bcm4912.dtsi
delete mode 100644 arch/arm/dts/bcm63146.dtsi
delete mode 100644 arch/arm/dts/bcm63158.dtsi
delete mode 100644 arch/arm/dts/bcm63178.dtsi
delete mode 100644 arch/arm/dts/bcm6756.dtsi
delete mode 100644 arch/arm/dts/bcm6813.dtsi
delete mode 100644 arch/arm/dts/bcm6855.dtsi
delete mode 100644 arch/arm/dts/bcm6856.dtsi
delete mode 100644 arch/arm/dts/bcm6858.dtsi
delete mode 100644 arch/arm/dts/bcm6878.dtsi
delete mode 100644 arch/arm/dts/bcm947622.dts
delete mode 100644 arch/arm/dts/bcm94912.dts
delete mode 100644 arch/arm/dts/bcm963146.dts
delete mode 100644 arch/arm/dts/bcm963158.dts
delete mode 100644 arch/arm/dts/bcm963178.dts
delete mode 100644 arch/arm/dts/bcm96756.dts
delete mode 100644 arch/arm/dts/bcm96813.dts
delete mode 100644 arch/arm/dts/bcm96855.dts
delete mode 100644 arch/arm/dts/bcm96856.dts
delete mode 100644 arch/arm/dts/bcm96858.dts
delete mode 100644 arch/arm/dts/bcm96878.dts
diff --git a/arch/arm/dts/bcm47622.dtsi b/arch/arm/dts/bcm47622.dtsi
deleted file mode 100644
index c016e12b7372..000000000000
--- a/arch/arm/dts/bcm47622.dtsi
+++ /dev/null
@@ -1,126 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- compatible = "brcm,bcm47622", "brcm,bcmbca";
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- CA7_0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
- CA7_2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
- CA7_3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- arm,cpu-registers-not-fw-configured;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&CA7_0>, <&CA7_1>,
- <&CA7_2>, <&CA7_3>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- cpu_off = <1>;
- cpu_on = <2>;
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x81000000 0x818000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm4912.dtsi b/arch/arm/dts/bcm4912.dtsi
deleted file mode 100644
index 3d016c2ce675..000000000000
--- a/arch/arm/dts/bcm4912.dtsi
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- compatible = "brcm,bcm4912", "brcm,bcmbca";
- #address-cells = <2>;
- #size-cells = <2>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- B53_0: cpu@0 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_1: cpu@1 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_2: cpu@2 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_3: cpu@3 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&B53_0>, <&B53_1>,
- <&B53_2>, <&B53_3>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm63146.dtsi b/arch/arm/dts/bcm63146.dtsi
deleted file mode 100644
index 04de96bd0a03..000000000000
--- a/arch/arm/dts/bcm63146.dtsi
+++ /dev/null
@@ -1,110 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- compatible = "brcm,bcm63146", "brcm,bcmbca";
- #address-cells = <2>;
- #size-cells = <2>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- B53_0: cpu@0 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_1: cpu@1 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&B53_0>, <&B53_1>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_HIGH)>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm63158.dtsi b/arch/arm/dts/bcm63158.dtsi
deleted file mode 100644
index 4bed1f914a9b..000000000000
--- a/arch/arm/dts/bcm63158.dtsi
+++ /dev/null
@@ -1,278 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2019 Philippe Reynes <philippe.reynes@softathome.com>
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- compatible = "brcm,bcm63158", "brcm,bcmbca";
- #address-cells = <2>;
- #size-cells = <2>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- B53_0: cpu@0 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_1: cpu@1 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_2: cpu@2 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_3: cpu@3 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&B53_0>, <&B53_1>,
- <&B53_2>, <&B53_3>;
- };
-
- clocks {
- bootph-all;
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-
- hsspi_pll: hsspi-pll {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-mult = <2>;
- clock-div = <1>;
- };
-
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
-
- wdt_clk: wdt-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
- bootph-all;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
-
- leds: led-controller@800 {
- compatible = "brcm,bcm6858-leds";
- reg = <0x800 0xe4>;
-
- status = "disabled";
- };
-
- wdt1: watchdog@480 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x480 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt2: watchdog@4c0 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x4c0 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt-reboot {
- compatible = "wdt-reboot";
- wdt = <&wdt1>;
- };
-
- gpio0: gpio-controller@500 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x500 0x4>,
- <0x520 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio1: gpio-controller@504 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x504 0x4>,
- <0x524 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio2: gpio-controller@508 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x508 0x4>,
- <0x528 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio3: gpio-controller@50c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x50c 0x4>,
- <0x52c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio4: gpio-controller@510 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x510 0x4>,
- <0x530 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio5: gpio-controller@514 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x514 0x4>,
- <0x534 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio6: gpio-controller@518 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x518 0x4>,
- <0x538 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio7: gpio-controller@51c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x51c 0x4>,
- <0x53c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- hsspi: spi-controller@1000 {
- compatible = "brcm,bcm6328-hsspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x1000 0x600>;
- clocks = <&hsspi_pll>, <&hsspi_pll>;
- clock-names = "hsspi", "pll";
- spi-max-frequency = <100000000>;
- num-cs = <8>;
-
- status = "disabled";
- };
-
- nand: nand-controller@1800 {
- compatible = "brcm,nand-bcm63158",
- "brcm,brcmnand-v5.0",
- "brcm,brcmnand";
- reg-names = "nand", "nand-int-base", "nand-cache";
- reg = <0x1800 0x180>,
- <0x2000 0x10>,
- <0x1c00 0x200>;
- parameter-page-big-endian = <0>;
-
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm63178.dtsi b/arch/arm/dts/bcm63178.dtsi
deleted file mode 100644
index cbd094dde6d0..000000000000
--- a/arch/arm/dts/bcm63178.dtsi
+++ /dev/null
@@ -1,120 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- compatible = "brcm,bcm63178", "brcm,bcmbca";
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- CA7_0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
- arm,cpu-registers-not-fw-configured;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&CA7_0>, <&CA7_1>,
- <&CA7_2>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm6756.dtsi b/arch/arm/dts/bcm6756.dtsi
deleted file mode 100644
index ce1b59faf800..000000000000
--- a/arch/arm/dts/bcm6756.dtsi
+++ /dev/null
@@ -1,130 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- compatible = "brcm,bcm6756", "brcm,bcmbca";
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- CA7_0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- arm,cpu-registers-not-fw-configured;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&CA7_0>, <&CA7_1>,
- <&CA7_2>, <&CA7_3>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm6813.dtsi b/arch/arm/dts/bcm6813.dtsi
deleted file mode 100644
index c3e6197be808..000000000000
--- a/arch/arm/dts/bcm6813.dtsi
+++ /dev/null
@@ -1,128 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- compatible = "brcm,bcm6813", "brcm,bcmbca";
- #address-cells = <2>;
- #size-cells = <2>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- B53_0: cpu@0 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_1: cpu@1 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_2: cpu@2 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_3: cpu@3 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&B53_0>, <&B53_1>,
- <&B53_2>, <&B53_3>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm6855.dtsi b/arch/arm/dts/bcm6855.dtsi
deleted file mode 100644
index 10c003a57c95..000000000000
--- a/arch/arm/dts/bcm6855.dtsi
+++ /dev/null
@@ -1,257 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2022 Philippe Reynes <philippe.reynes@softathome.com>
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- compatible = "brcm,bcm6855", "brcm,bcmbca";
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- CA7_0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
- arm,cpu-registers-not-fw-configured;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>;
- };
-
- clocks: clocks {
- bootph-all;
-
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
-
- hsspi_pll: hsspi-pll {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-mult = <2>;
- clock-div = <1>;
- };
-
- wdt_clk: wdt-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0xff800000 0x800000>;
- bootph-all;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
-
- wdt1: watchdog@480 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x480 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt2: watchdog@4c0 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x4c0 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt-reboot {
- compatible = "wdt-reboot";
- wdt = <&wdt1>;
- };
-
- gpio0: gpio-controller@500 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x500 0x4>,
- <0x520 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio1: gpio-controller@504 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x504 0x4>,
- <0x524 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio2: gpio-controller@508 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x508 0x4>,
- <0x528 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio3: gpio-controller@50c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x50c 0x4>,
- <0x52c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio4: gpio-controller@510 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x510 0x4>,
- <0x530 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio5: gpio-controller@514 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x514 0x4>,
- <0x534 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio6: gpio-controller@518 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x518 0x4>,
- <0x538 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio7: gpio-controller@51c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x51c 0x4>,
- <0x53c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- nand: nand-controller@1800 {
- compatible = "brcm,nand-bcm6753",
- "brcm,brcmnand-v5.0",
- "brcm,brcmnand";
- reg-names = "nand", "nand-int-base", "nand-cache";
- reg = <0x1800 0x180>,
- <0x2000 0x10>,
- <0x1c00 0x200>;
- parameter-page-big-endian = <0>;
-
- status = "disabled";
- };
-
- leds: led-controller@3000 {
- compatible = "brcm,bcm6753-leds";
- reg = <0x3000 0x3480>;
-
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm6856.dtsi b/arch/arm/dts/bcm6856.dtsi
deleted file mode 100644
index 38c88f8399bb..000000000000
--- a/arch/arm/dts/bcm6856.dtsi
+++ /dev/null
@@ -1,253 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2020 Philippe Reynes <philippe.reynes@softathome.com>
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- compatible = "brcm,bcm6856", "brcm,bcmbca";
- #address-cells = <2>;
- #size-cells = <2>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- B53_0: cpu@0 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_1: cpu@1 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&B53_0>, <&B53_1>;
- };
-
- clocks: clocks {
- bootph-all;
-
- periph_clk:periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-
- hsspi_pll: hsspi-pll {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-mult = <2>;
- clock-div = <1>;
- };
-
- wdt_clk: wdt-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x1000 0x1000>, /* GICD */
- <0x2000 0x2000>, /* GICC */
- <0x4000 0x2000>, /* GICH */
- <0x6000 0x2000>; /* GICV */
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_HIGH)>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
- bootph-all;
-
- uart0: serial@640 {
- compatible = "brcm,bcm6345-uart";
- reg = <0x640 0x18>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&periph_clk>;
- clock-names = "refclk";
- status = "disabled";
- };
-
- wdt1: watchdog@480 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x480 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt2: watchdog@4c0 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x4c0 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt-reboot {
- compatible = "wdt-reboot";
- wdt = <&wdt1>;
- };
-
- leds: led-controller@800 {
- compatible = "brcm,bcm6858-leds";
- reg = <0x800 0xe4>;
-
- status = "disabled";
- };
-
- gpio0: gpio-controller@500 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x500 0x4>,
- <0x520 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio1: gpio-controller@504 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x504 0x4>,
- <0x524 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio2: gpio-controller@508 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x508 0x4>,
- <0x528 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio3: gpio-controller@50c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x50c 0x4>,
- <0x52c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio4: gpio-controller@510 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x510 0x4>,
- <0x530 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio5: gpio-controller@514 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x514 0x4>,
- <0x534 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio6: gpio-controller@518 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x518 0x4>,
- <0x538 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio7: gpio-controller@51c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x51c 0x4>,
- <0x53c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- hsspi: spi-controller@1000 {
- compatible = "brcm,bcm6328-hsspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x1000 0x600>;
- clocks = <&hsspi_pll>, <&hsspi_pll>;
- clock-names = "hsspi", "pll";
- spi-max-frequency = <100000000>;
- num-cs = <8>;
-
- status = "disabled";
- };
-
- nand: nand-controller@1800 {
- compatible = "brcm,nand-bcm68360",
- "brcm,brcmnand-v5.0",
- "brcm,brcmnand";
- reg-names = "nand", "nand-int-base", "nand-cache";
- reg = <0x1800 0x180>,
- <0x2000 0x10>,
- <0x1c00 0x200>;
- parameter-page-big-endian = <0>;
-
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm6858.dtsi b/arch/arm/dts/bcm6858.dtsi
deleted file mode 100644
index dc95047a2659..000000000000
--- a/arch/arm/dts/bcm6858.dtsi
+++ /dev/null
@@ -1,272 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Philippe Reynes <philippe.reynes@softathome.com>
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-/ {
- compatible = "brcm,bcm6858", "brcm,bcmbca";
- #address-cells = <2>;
- #size-cells = <2>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- B53_0: cpu@0 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_1: cpu@1 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_2: cpu@2 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x2>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- B53_3: cpu@3 {
- compatible = "brcm,brahma-b53";
- device_type = "cpu";
- reg = <0x0 0x3>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
- pmu: pmu {
- compatible = "arm,armv8-pmuv3";
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&B53_0>, <&B53_1>,
- <&B53_2>, <&B53_3>;
- };
-
- clocks {
- bootph-all;
-
- periph_clk: periph_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-
- hsspi_pll: hsspi-pll {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-mult = <2>;
- clock-div = <1>;
- };
-
- wdt_clk: wdt-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x1000 0x1000>, /* GICD */
- <0x2000 0x2000>, /* GICC */
- <0x4000 0x2000>, /* GICH */
- <0x6000 0x2000>; /* GICV */
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
- IRQ_TYPE_LEVEL_HIGH)>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
- bootph-all;
-
- uart0: serial@640 {
- compatible = "brcm,bcm6345-uart";
- reg = <0x640 0x18>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&periph_clk>;
- clock-names = "refclk";
- status = "disabled";
- };
-
- leds: led-controller@800 {
- compatible = "brcm,bcm6858-leds";
- reg = <0x800 0xe4>;
-
- status = "disabled";
- };
-
- wdt1: watchdog@2780 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x2780 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt2: watchdog@27c0 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x27c0 0x14>;
- clocks = <&wdt_clk>;
- };
-
- wdt-reboot {
- compatible = "wdt-reboot";
- wdt = <&wdt1>;
- };
-
- gpio0: gpio-controller@500 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x500 0x4>,
- <0x520 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio1: gpio-controller@504 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x504 0x4>,
- <0x524 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio2: gpio-controller@508 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x508 0x4>,
- <0x528 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio3: gpio-controller@50c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x50c 0x4>,
- <0x52c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio4: gpio-controller@510 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x510 0x4>,
- <0x530 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio5: gpio-controller@514 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x514 0x4>,
- <0x534 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio6: gpio-controller@518 {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x518 0x4>,
- <0x538 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- gpio7: gpio-controller@51c {
- compatible = "brcm,bcm6345-gpio";
- reg = <0x51c 0x4>,
- <0x53c 0x4>;
- gpio-controller;
- #gpio-cells = <2>;
-
- status = "disabled";
- };
-
- hsspi: spi-controller@1000 {
- compatible = "brcm,bcm6328-hsspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x1000 0x600>;
- clocks = <&hsspi_pll>, <&hsspi_pll>;
- clock-names = "hsspi", "pll";
- spi-max-frequency = <100000000>;
- num-cs = <8>;
-
- status = "disabled";
- };
-
- nand: nand-controller@1800 {
- compatible = "brcm,nand-bcm6858",
- "brcm,brcmnand-v5.0",
- "brcm,brcmnand";
- reg-names = "nand", "nand-int-base", "nand-cache";
- reg = <0x1800 0x180>,
- <0x2000 0x10>,
- <0x1c00 0x200>;
- parameter-page-big-endian = <0>;
-
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm6878.dtsi b/arch/arm/dts/bcm6878.dtsi
deleted file mode 100644
index 1e8b5fa96c25..000000000000
--- a/arch/arm/dts/bcm6878.dtsi
+++ /dev/null
@@ -1,111 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- compatible = "brcm,bcm6878", "brcm,bcmbca";
- #address-cells = <1>;
- #size-cells = <1>;
-
- interrupt-parent = <&gic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- CA7_0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x0>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- CA7_1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x1>;
- next-level-cache = <&L2_0>;
- enable-method = "psci";
- };
-
- L2_0: l2-cache0 {
- compatible = "cache";
- };
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
- arm,cpu-registers-not-fw-configured;
- };
-
- pmu: pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&CA7_0>, <&CA7_1>;
- };
-
- clocks: clocks {
- periph_clk: periph-clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
- clocks = <&periph_clk>;
- clock-div = <4>;
- clock-mult = <1>;
- };
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- axi@81000000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x81000000 0x8000>;
-
- gic: interrupt-controller@1000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x1000 0x1000>,
- <0x2000 0x2000>,
- <0x4000 0x2000>,
- <0x6000 0x2000>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_HIGH)>;
- };
- };
-
- bus@ff800000 {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0xff800000 0x800000>;
-
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&uart_clk>, <&uart_clk>;
- clock-names = "uartclk", "apb_pclk";
- status = "disabled";
- };
- };
-};
diff --git a/arch/arm/dts/bcm947622.dts b/arch/arm/dts/bcm947622.dts
deleted file mode 100644
index 6f083724ab8e..000000000000
--- a/arch/arm/dts/bcm947622.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm47622.dtsi"
-
-/ {
- model = "Broadcom BCM947622 Reference Board";
- compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm94912.dts b/arch/arm/dts/bcm94912.dts
deleted file mode 100644
index a3623e6f6919..000000000000
--- a/arch/arm/dts/bcm94912.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm4912.dtsi"
-
-/ {
- model = "Broadcom BCM94912 Reference Board";
- compatible = "brcm,bcm94912", "brcm,bcm4912", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm963146.dts b/arch/arm/dts/bcm963146.dts
deleted file mode 100644
index e39f1e6d4774..000000000000
--- a/arch/arm/dts/bcm963146.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm63146.dtsi"
-
-/ {
- model = "Broadcom BCM963146 Reference Board";
- compatible = "brcm,bcm963146", "brcm,bcm63146", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm963158.dts b/arch/arm/dts/bcm963158.dts
deleted file mode 100644
index eba07e0b1ca6..000000000000
--- a/arch/arm/dts/bcm963158.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm63158.dtsi"
-
-/ {
- model = "Broadcom BCM963158 Reference Board";
- compatible = "brcm,bcm963158", "brcm,bcm63158", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm963178.dts b/arch/arm/dts/bcm963178.dts
deleted file mode 100644
index fa096e9cde23..000000000000
--- a/arch/arm/dts/bcm963178.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm63178.dtsi"
-
-/ {
- model = "Broadcom BCM963178 Reference Board";
- compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm96756.dts b/arch/arm/dts/bcm96756.dts
deleted file mode 100644
index 9a4a87ba9c8a..000000000000
--- a/arch/arm/dts/bcm96756.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6756.dtsi"
-
-/ {
- model = "Broadcom BCM96756 Reference Board";
- compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm96813.dts b/arch/arm/dts/bcm96813.dts
deleted file mode 100644
index af17091ae764..000000000000
--- a/arch/arm/dts/bcm96813.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6813.dtsi"
-
-/ {
- model = "Broadcom BCM96813 Reference Board";
- compatible = "brcm,bcm96813", "brcm,bcm6813", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm96855.dts b/arch/arm/dts/bcm96855.dts
deleted file mode 100644
index e4e740c73e97..000000000000
--- a/arch/arm/dts/bcm96855.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6855.dtsi"
-
-/ {
- model = "Broadcom BCM96855 Reference Board";
- compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm96856.dts b/arch/arm/dts/bcm96856.dts
deleted file mode 100644
index 032aeb75c983..000000000000
--- a/arch/arm/dts/bcm96856.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6856.dtsi"
-
-/ {
- model = "Broadcom BCM96856 Reference Board";
- compatible = "brcm,bcm96856", "brcm,bcm6856", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm96858.dts b/arch/arm/dts/bcm96858.dts
deleted file mode 100644
index 0cbf582f5d54..000000000000
--- a/arch/arm/dts/bcm96858.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2022 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6858.dtsi"
-
-/ {
- model = "Broadcom BCM96858 Reference Board";
- compatible = "brcm,bcm96858", "brcm,bcm6858", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/dts/bcm96878.dts b/arch/arm/dts/bcm96878.dts
deleted file mode 100644
index 8fbc175cb452..000000000000
--- a/arch/arm/dts/bcm96878.dts
+++ /dev/null
@@ -1,30 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright 2019 Broadcom Ltd.
- */
-
-/dts-v1/;
-
-#include "bcm6878.dtsi"
-
-/ {
- model = "Broadcom BCM96878 Reference Board";
- compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x08000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-};
diff --git a/arch/arm/mach-bcmbca/bcm47622/Kconfig b/arch/arm/mach-bcmbca/bcm47622/Kconfig
index bce30892e35d..56ce280a1cde 100644
--- a/arch/arm/mach-bcmbca/bcm47622/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm47622/Kconfig
@@ -8,6 +8,7 @@ if BCM47622
config TARGET_BCM947622
bool "Broadcom 47622 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm47622"
diff --git a/arch/arm/mach-bcmbca/bcm4912/Kconfig b/arch/arm/mach-bcmbca/bcm4912/Kconfig
index b8c14d1dc1a1..9844ddeb8b8b 100644
--- a/arch/arm/mach-bcmbca/bcm4912/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm4912/Kconfig
@@ -8,6 +8,7 @@ if BCM4912
config TARGET_BCM94912
bool "Broadcom 4912 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm4912"
diff --git a/arch/arm/mach-bcmbca/bcm63146/Kconfig b/arch/arm/mach-bcmbca/bcm63146/Kconfig
index 690cbf1eb20a..7c26742e4742 100644
--- a/arch/arm/mach-bcmbca/bcm63146/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm63146/Kconfig
@@ -8,6 +8,7 @@ if BCM63146
config TARGET_BCM963146
bool "Broadcom 63146 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm63146"
diff --git a/arch/arm/mach-bcmbca/bcm63158/Kconfig b/arch/arm/mach-bcmbca/bcm63158/Kconfig
index b77444369ec9..6db7b36aa327 100644
--- a/arch/arm/mach-bcmbca/bcm63158/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm63158/Kconfig
@@ -8,6 +8,7 @@ if BCM63158
config TARGET_BCM963158
bool "Broadcom 63158 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm63158"
diff --git a/arch/arm/mach-bcmbca/bcm63178/Kconfig b/arch/arm/mach-bcmbca/bcm63178/Kconfig
index 73ac46284b2c..167acfff2c9d 100644
--- a/arch/arm/mach-bcmbca/bcm63178/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm63178/Kconfig
@@ -8,6 +8,7 @@ if BCM63178
config TARGET_BCM963178
bool "Broadcom 63178 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm63178"
diff --git a/arch/arm/mach-bcmbca/bcm6756/Kconfig b/arch/arm/mach-bcmbca/bcm6756/Kconfig
index c83dcd0f3e2b..bbaa45eaab0a 100644
--- a/arch/arm/mach-bcmbca/bcm6756/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm6756/Kconfig
@@ -8,6 +8,7 @@ if BCM6756
config TARGET_BCM96756
bool "Broadcom 6756 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm6756"
diff --git a/arch/arm/mach-bcmbca/bcm6813/Kconfig b/arch/arm/mach-bcmbca/bcm6813/Kconfig
index 25a4221bef9c..0cda69cb43ee 100644
--- a/arch/arm/mach-bcmbca/bcm6813/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm6813/Kconfig
@@ -8,6 +8,7 @@ if BCM6813
config TARGET_BCM96813
bool "Broadcom 6813 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm6813"
diff --git a/arch/arm/mach-bcmbca/bcm6855/Kconfig b/arch/arm/mach-bcmbca/bcm6855/Kconfig
index 78087c7dd59d..31eaaed7ca24 100644
--- a/arch/arm/mach-bcmbca/bcm6855/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm6855/Kconfig
@@ -8,6 +8,7 @@ if BCM6855
config TARGET_BCM96855
bool "Broadcom 6855 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm6855"
diff --git a/arch/arm/mach-bcmbca/bcm6856/Kconfig b/arch/arm/mach-bcmbca/bcm6856/Kconfig
index 6ac75cb84095..7b09a1577bb1 100644
--- a/arch/arm/mach-bcmbca/bcm6856/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm6856/Kconfig
@@ -8,6 +8,7 @@ if BCM6856
config TARGET_BCM96856
bool "Broadcom 6856 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm6856"
diff --git a/arch/arm/mach-bcmbca/bcm6858/Kconfig b/arch/arm/mach-bcmbca/bcm6858/Kconfig
index a6504bae1f18..d32107a17a89 100644
--- a/arch/arm/mach-bcmbca/bcm6858/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm6858/Kconfig
@@ -8,6 +8,7 @@ if BCM6858
config TARGET_BCM96858
bool "Broadcom 6858 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm6858"
diff --git a/arch/arm/mach-bcmbca/bcm6878/Kconfig b/arch/arm/mach-bcmbca/bcm6878/Kconfig
index 43f8942c9b1d..2365cfde6ec2 100644
--- a/arch/arm/mach-bcmbca/bcm6878/Kconfig
+++ b/arch/arm/mach-bcmbca/bcm6878/Kconfig
@@ -8,6 +8,7 @@ if BCM6878
config TARGET_BCM96878
bool "Broadcom 6878 Reference Board"
depends on ARCH_BCMBCA
+ imply OF_UPSTREAM
config SYS_SOC
default "bcm6878"
diff --git a/configs/bcm947622_defconfig b/configs/bcm947622_defconfig
index 71057f1dc042..cf0651c65023 100644
--- a/configs/bcm947622_defconfig
+++ b/configs/bcm947622_defconfig
@@ -8,7 +8,7 @@ CONFIG_TARGET_BCM947622=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm947622"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcm947622"
CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM47622"
@@ -16,6 +16,15 @@ CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm94912_defconfig b/configs/bcm94912_defconfig
index 5b6de30cd8b5..bce823b90418 100644
--- a/configs/bcm94912_defconfig
+++ b/configs/bcm94912_defconfig
@@ -9,13 +9,22 @@ CONFIG_TARGET_BCM94912=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm94912"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcmbca/bcm94912"
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM4912"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm963146_defconfig b/configs/bcm963146_defconfig
index 5033b069d7d3..691d055e310c 100644
--- a/configs/bcm963146_defconfig
+++ b/configs/bcm963146_defconfig
@@ -9,13 +9,22 @@ CONFIG_TARGET_BCM963146=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm963146"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcmbca/bcm963146"
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM63146"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm963158_defconfig b/configs/bcm963158_defconfig
index c3010d979085..6e4a85ec3a3c 100644
--- a/configs/bcm963158_defconfig
+++ b/configs/bcm963158_defconfig
@@ -9,13 +9,22 @@ CONFIG_TARGET_BCM963158=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm963158"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcmbca/bcm963158"
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM63158"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm963178_defconfig b/configs/bcm963178_defconfig
index 1409febae14f..60a198719a35 100644
--- a/configs/bcm963178_defconfig
+++ b/configs/bcm963178_defconfig
@@ -9,7 +9,7 @@ CONFIG_TARGET_BCM963178=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm963178"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcm963178"
CONFIG_SYS_BOOTM_LEN=0x4000000
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM63178"
@@ -17,6 +17,15 @@ CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm96756_defconfig b/configs/bcm96756_defconfig
index 96a9a311037a..4b1fa991a04d 100644
--- a/configs/bcm96756_defconfig
+++ b/configs/bcm96756_defconfig
@@ -9,7 +9,7 @@ CONFIG_TARGET_BCM96756=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm96756"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcm96756"
CONFIG_SYS_BOOTM_LEN=0x4000000
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM6756"
@@ -17,6 +17,15 @@ CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm96813_defconfig b/configs/bcm96813_defconfig
index eadcb6374c64..553bdc148b28 100644
--- a/configs/bcm96813_defconfig
+++ b/configs/bcm96813_defconfig
@@ -9,13 +9,22 @@ CONFIG_TARGET_BCM96813=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm96813"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcmbca/bcm96813"
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM6813"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm96855_defconfig b/configs/bcm96855_defconfig
index 6ffae45faa2d..ff6dff0fca63 100644
--- a/configs/bcm96855_defconfig
+++ b/configs/bcm96855_defconfig
@@ -9,7 +9,7 @@ CONFIG_TARGET_BCM96855=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm96855"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcm96855"
CONFIG_SYS_BOOTM_LEN=0x4000000
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM6855"
@@ -17,6 +17,15 @@ CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm96856_defconfig b/configs/bcm96856_defconfig
index f926b3770f0c..7c6fba29abf6 100644
--- a/configs/bcm96856_defconfig
+++ b/configs/bcm96856_defconfig
@@ -9,13 +9,22 @@ CONFIG_TARGET_BCM96856=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm96856"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcmbca/bcm96856"
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM6856"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm96858_defconfig b/configs/bcm96858_defconfig
index cc6069fe794f..3e11b4012601 100644
--- a/configs/bcm96858_defconfig
+++ b/configs/bcm96858_defconfig
@@ -9,13 +9,22 @@ CONFIG_TARGET_BCM96858=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm96858"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcmbca/bcm96858"
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM6858"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
diff --git a/configs/bcm96878_defconfig b/configs/bcm96878_defconfig
index 7d1cd6c944f9..52c869aab9b6 100644
--- a/configs/bcm96878_defconfig
+++ b/configs/bcm96878_defconfig
@@ -9,7 +9,7 @@ CONFIG_TARGET_BCM96878=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x2000000
-CONFIG_DEFAULT_DEVICE_TREE="bcm96878"
+CONFIG_DEFAULT_DEVICE_TREE="broadcom/bcm96878"
CONFIG_SYS_BOOTM_LEN=0x4000000
CONFIG_SYS_LOAD_ADDR=0x01000000
CONFIG_IDENT_STRING=" Broadcom BCM6878"
@@ -17,6 +17,15 @@ CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_HUSH_PARSER=y
+CONFIG_CMD_NAND=y
CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
CONFIG_OF_EMBED=y
+CONFIG_DM=y
CONFIG_CLK=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_BRCMNAND=y
+CONFIG_NAND_BRCMNAND_BCMBCA=y
--
2.37.3
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2 3/4] mtd: rawnand: brcmnand: Default bcmbca parameter_page_big_endian to zero
2024-11-13 6:27 [PATCH v2 0/4] Broadcom BCMBCA nand updates david regan
2024-11-13 6:27 ` [PATCH v2 1/4] mtd: nand: brcmnand: remove device specific nand driver files david regan
2024-11-13 6:27 ` [PATCH v2 2/4] arm: dts: Use upstream dts david regan
@ 2024-11-13 6:27 ` david regan
2024-11-13 7:53 ` Linus Walleij
2024-11-13 6:27 ` [PATCH v2 4/4] mtd: rawnand: brcmnand: update log level messages david regan
2024-11-13 8:26 ` [PATCH v2 0/4] Broadcom BCMBCA nand updates Michael Nazzareno Trimarchi
4 siblings, 1 reply; 7+ messages in thread
From: david regan @ 2024-11-13 6:27 UTC (permalink / raw)
To: u-boot, Dario Binacchi, Michael Trimarchi, Anand Gore,
William Zhang, Kursad Oney, Philippe Reynes, Linus Walleij,
Florian Fainelli, Miquel Raynal, Kamal Dasu, Tom Rini,
Jiaxun Yang, dregan, dregan
Set parameter_page_big_endian to zero for bcmbca
Signed-off-by: david regan <dregan@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Anand Gore <anand.gore@broadcom.com>
---
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 749553c9df90..7fd9e1855d1e 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2793,9 +2793,17 @@ int brcmnand_probe(struct udevice *dev, struct brcmnand_soc *soc)
nand_hw_control_init(&ctrl->controller);
INIT_LIST_HEAD(&ctrl->host_list);
+#ifdef CONFIG_NAND_BRCMNAND_BCMBCA
+ /*
+ * BCMBCA platform does not use non-linux parameter-page-big-endian dts property,
+ * param page data is little endian
+ */
+ ctrl->parameter_page_big_endian = 0;
+#else
/* Is parameter page in big endian ? */
ctrl->parameter_page_big_endian =
dev_read_u32_default(dev, "parameter-page-big-endian", 1);
+#endif
/* NAND register range */
#ifndef __UBOOT__
--
2.37.3
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v2 4/4] mtd: rawnand: brcmnand: update log level messages
2024-11-13 6:27 [PATCH v2 0/4] Broadcom BCMBCA nand updates david regan
` (2 preceding siblings ...)
2024-11-13 6:27 ` [PATCH v2 3/4] mtd: rawnand: brcmnand: Default bcmbca parameter_page_big_endian to zero david regan
@ 2024-11-13 6:27 ` david regan
2024-11-13 8:26 ` [PATCH v2 0/4] Broadcom BCMBCA nand updates Michael Nazzareno Trimarchi
4 siblings, 0 replies; 7+ messages in thread
From: david regan @ 2024-11-13 6:27 UTC (permalink / raw)
To: u-boot, Dario Binacchi, Michael Trimarchi, Anand Gore,
William Zhang, Kursad Oney, Philippe Reynes, Linus Walleij,
Florian Fainelli, Miquel Raynal, Kamal Dasu, Tom Rini,
Jiaxun Yang, dregan, dregan
Update log level messages so that more critical messages can be logged
to console and help the troubleshooting with field devices.
This is a port of the upstream Linux patch to U-Boot.
https://lore.kernel.org/linux-mtd/20240223034758.13753-4-william.zhang@broadcom.com/
Signed-off-by: david regan <dregan@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Anand Gore <anand.gore@broadcom.com>
---
drivers/mtd/nand/raw/brcmnand/brcmnand.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index 7fd9e1855d1e..ef492e6db320 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -1071,8 +1071,8 @@ static int bcmnand_ctrl_poll_status(struct brcmnand_controller *ctrl,
if ((val & mask) == expected_val)
return 0;
- dev_warn(ctrl->dev, "timeout on status poll (expected %x got %x)\n",
- expected_val, val & mask);
+ dev_err(ctrl->dev, "timeout on status poll (expected %x got %x)\n",
+ expected_val, val & mask);
return -ETIMEDOUT;
}
@@ -2032,7 +2032,7 @@ try_dmaread:
return err;
}
- dev_dbg(ctrl->dev, "uncorrectable error at 0x%llx\n",
+ dev_err(ctrl->dev, "uncorrectable error at 0x%llx\n",
(unsigned long long)err_addr);
mtd->ecc_stats.failed++;
/* NAND layer expects zero on ECC errors */
--
2.37.3
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v2 3/4] mtd: rawnand: brcmnand: Default bcmbca parameter_page_big_endian to zero
2024-11-13 6:27 ` [PATCH v2 3/4] mtd: rawnand: brcmnand: Default bcmbca parameter_page_big_endian to zero david regan
@ 2024-11-13 7:53 ` Linus Walleij
0 siblings, 0 replies; 7+ messages in thread
From: Linus Walleij @ 2024-11-13 7:53 UTC (permalink / raw)
To: david regan
Cc: u-boot, Dario Binacchi, Michael Trimarchi, Anand Gore,
William Zhang, Kursad Oney, Philippe Reynes, Florian Fainelli,
Miquel Raynal, Kamal Dasu, Tom Rini, Jiaxun Yang, dregan
On Wed, Nov 13, 2024 at 7:27 AM david regan <dregan@broadcom.com> wrote:
> Set parameter_page_big_endian to zero for bcmbca
>
> Signed-off-by: david regan <dregan@broadcom.com>
> Reviewed-by: William Zhang <william.zhang@broadcom.com>
> Reviewed-by: Anand Gore <anand.gore@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v2 0/4] Broadcom BCMBCA nand updates
2024-11-13 6:27 [PATCH v2 0/4] Broadcom BCMBCA nand updates david regan
` (3 preceding siblings ...)
2024-11-13 6:27 ` [PATCH v2 4/4] mtd: rawnand: brcmnand: update log level messages david regan
@ 2024-11-13 8:26 ` Michael Nazzareno Trimarchi
4 siblings, 0 replies; 7+ messages in thread
From: Michael Nazzareno Trimarchi @ 2024-11-13 8:26 UTC (permalink / raw)
To: david regan
Cc: u-boot, Dario Binacchi, Anand Gore, William Zhang, Kursad Oney,
Philippe Reynes, Linus Walleij, Florian Fainelli, Miquel Raynal,
Kamal Dasu, Tom Rini, Jiaxun Yang, dregan
HI
On Wed, Nov 13, 2024 at 7:27 AM david regan <dregan@broadcom.com> wrote:
>
> These are ports of upstream Linux patches to U-Boot.
>
> Remove device specific nand driver files as they are now replaced
> by a common driver bcmbca_nand.c
>
> Make use of OF_UPSTREAM which uses Linux dts.
>
> Implement a minimal set of defconfig options to enable basic NAND
> functionality. Tested on:
> 47622
> 63146
> 63158
> 63178
> 6813
>
> Set parameter_page_big_endian to zero for bcmbca.
>
> Update log level messages so that more critical messages can be logged
> to console and help the troubleshooting with field devices.
>
> https://lore.kernel.org/linux-mtd/20240223034758.13753-4-william.zhang@broadcom.com/
>
I get all the review I need so I will send on CI today and send on
next merge request
Michael
> ---
>
> Changes in v2:
> - Set parameter_page_big_endian to zero for bcmbca instead of
> using an extra bit of endian translation code.
>
> david regan (4):
> mtd: nand: brcmnand: remove device specific nand driver files
> arm: dts: Use upstream dts
> mtd: rawnand: brcmnand: Default bcmbca parameter_page_big_endian to
> zero
> mtd: rawnand: brcmnand: update log level messages
>
> arch/arm/dts/bcm47622.dtsi | 126 --------
> arch/arm/dts/bcm4912.dtsi | 128 --------
> arch/arm/dts/bcm63146.dtsi | 110 -------
> arch/arm/dts/bcm63158.dtsi | 278 ------------------
> arch/arm/dts/bcm63178.dtsi | 120 --------
> arch/arm/dts/bcm6756.dtsi | 130 --------
> arch/arm/dts/bcm6813.dtsi | 128 --------
> arch/arm/dts/bcm6855.dtsi | 257 ----------------
> arch/arm/dts/bcm6856.dtsi | 253 ----------------
> arch/arm/dts/bcm6858.dtsi | 272 -----------------
> arch/arm/dts/bcm6878.dtsi | 111 -------
> arch/arm/dts/bcm947622.dts | 30 --
> arch/arm/dts/bcm94912.dts | 30 --
> arch/arm/dts/bcm963146.dts | 30 --
> arch/arm/dts/bcm963158.dts | 30 --
> arch/arm/dts/bcm963178.dts | 30 --
> arch/arm/dts/bcm96756.dts | 30 --
> arch/arm/dts/bcm96813.dts | 30 --
> arch/arm/dts/bcm96855.dts | 30 --
> arch/arm/dts/bcm96856.dts | 30 --
> arch/arm/dts/bcm96858.dts | 30 --
> arch/arm/dts/bcm96878.dts | 30 --
> arch/arm/mach-bcmbca/bcm47622/Kconfig | 1 +
> arch/arm/mach-bcmbca/bcm4912/Kconfig | 1 +
> arch/arm/mach-bcmbca/bcm63146/Kconfig | 1 +
> arch/arm/mach-bcmbca/bcm63158/Kconfig | 1 +
> arch/arm/mach-bcmbca/bcm63178/Kconfig | 1 +
> arch/arm/mach-bcmbca/bcm6756/Kconfig | 1 +
> arch/arm/mach-bcmbca/bcm6813/Kconfig | 1 +
> arch/arm/mach-bcmbca/bcm6855/Kconfig | 1 +
> arch/arm/mach-bcmbca/bcm6856/Kconfig | 1 +
> arch/arm/mach-bcmbca/bcm6858/Kconfig | 1 +
> arch/arm/mach-bcmbca/bcm6878/Kconfig | 1 +
> configs/bcm947622_defconfig | 11 +-
> configs/bcm94912_defconfig | 11 +-
> configs/bcm963146_defconfig | 11 +-
> configs/bcm963158_defconfig | 11 +-
> configs/bcm963178_defconfig | 11 +-
> configs/bcm96756_defconfig | 11 +-
> configs/bcm96813_defconfig | 11 +-
> configs/bcm96855_defconfig | 11 +-
> configs/bcm96856_defconfig | 11 +-
> configs/bcm96858_defconfig | 11 +-
> configs/bcm96878_defconfig | 11 +-
> drivers/mtd/nand/raw/Kconfig | 24 --
> drivers/mtd/nand/raw/brcmnand/Makefile | 4 -
> drivers/mtd/nand/raw/brcmnand/bcm63158_nand.c | 125 --------
> drivers/mtd/nand/raw/brcmnand/bcm6753_nand.c | 123 --------
> drivers/mtd/nand/raw/brcmnand/bcm68360_nand.c | 124 --------
> drivers/mtd/nand/raw/brcmnand/bcm6858_nand.c | 125 --------
> drivers/mtd/nand/raw/brcmnand/brcmnand.c | 14 +-
> 51 files changed, 132 insertions(+), 2782 deletions(-)
> delete mode 100644 arch/arm/dts/bcm47622.dtsi
> delete mode 100644 arch/arm/dts/bcm4912.dtsi
> delete mode 100644 arch/arm/dts/bcm63146.dtsi
> delete mode 100644 arch/arm/dts/bcm63158.dtsi
> delete mode 100644 arch/arm/dts/bcm63178.dtsi
> delete mode 100644 arch/arm/dts/bcm6756.dtsi
> delete mode 100644 arch/arm/dts/bcm6813.dtsi
> delete mode 100644 arch/arm/dts/bcm6855.dtsi
> delete mode 100644 arch/arm/dts/bcm6856.dtsi
> delete mode 100644 arch/arm/dts/bcm6858.dtsi
> delete mode 100644 arch/arm/dts/bcm6878.dtsi
> delete mode 100644 arch/arm/dts/bcm947622.dts
> delete mode 100644 arch/arm/dts/bcm94912.dts
> delete mode 100644 arch/arm/dts/bcm963146.dts
> delete mode 100644 arch/arm/dts/bcm963158.dts
> delete mode 100644 arch/arm/dts/bcm963178.dts
> delete mode 100644 arch/arm/dts/bcm96756.dts
> delete mode 100644 arch/arm/dts/bcm96813.dts
> delete mode 100644 arch/arm/dts/bcm96855.dts
> delete mode 100644 arch/arm/dts/bcm96856.dts
> delete mode 100644 arch/arm/dts/bcm96858.dts
> delete mode 100644 arch/arm/dts/bcm96878.dts
> delete mode 100644 drivers/mtd/nand/raw/brcmnand/bcm63158_nand.c
> delete mode 100644 drivers/mtd/nand/raw/brcmnand/bcm6753_nand.c
> delete mode 100644 drivers/mtd/nand/raw/brcmnand/bcm68360_nand.c
> delete mode 100644 drivers/mtd/nand/raw/brcmnand/bcm6858_nand.c
>
> --
> 2.37.3
>
--
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
michael@amarulasolutions.com
__________________________________
Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
info@amarulasolutions.com
www.amarulasolutions.com
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2024-11-13 13:01 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-11-13 6:27 [PATCH v2 0/4] Broadcom BCMBCA nand updates david regan
2024-11-13 6:27 ` [PATCH v2 1/4] mtd: nand: brcmnand: remove device specific nand driver files david regan
2024-11-13 6:27 ` [PATCH v2 2/4] arm: dts: Use upstream dts david regan
2024-11-13 6:27 ` [PATCH v2 3/4] mtd: rawnand: brcmnand: Default bcmbca parameter_page_big_endian to zero david regan
2024-11-13 7:53 ` Linus Walleij
2024-11-13 6:27 ` [PATCH v2 4/4] mtd: rawnand: brcmnand: update log level messages david regan
2024-11-13 8:26 ` [PATCH v2 0/4] Broadcom BCMBCA nand updates Michael Nazzareno Trimarchi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox