From: Nishanth Menon <nm@ti.com>
To: Heinrich Schuchardt <xypron.glpk@gmx.de>,
Andrew Davis <afd@ti.com>, Neha Malcom Francis <n-francis@ti.com>,
Robert Nelson <robertcnelson@gmail.com>,
Tom Rini <trini@konsulko.com>
Cc: Beleswar Padhi <b-padhi@ti.com>, Udit Kumar <u-kumar1@ti.com>,
Jonathan Humphreys <j-humphreys@ti.com>,
Nishanth Menon <nm@ti.com>, <u-boot@lists.denx.de>
Subject: [PATCH 2/9] arch: arm: dts: k3-am67a-beagley-ai-u-boot: Mark main_gpio1 as bootph-all
Date: Fri, 11 Apr 2025 17:57:10 -0500 [thread overview]
Message-ID: <20250411225717.3117370-3-nm@ti.com> (raw)
In-Reply-To: <20250411225717.3117370-1-nm@ti.com>
main_gpio1 controls the voltage for the SDcard from 3.3v to 1.8v.
This is required for proper operation of SDcard through various boot
stages.
Fixes the following seen in the boot log:
failed to set vqmmc-voltage to 3.3V
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/dts/k3-am67a-beagley-ai-u-boot.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/dts/k3-am67a-beagley-ai-u-boot.dtsi b/arch/arm/dts/k3-am67a-beagley-ai-u-boot.dtsi
index 6c52038cdcaf..6330ca93fc74 100644
--- a/arch/arm/dts/k3-am67a-beagley-ai-u-boot.dtsi
+++ b/arch/arm/dts/k3-am67a-beagley-ai-u-boot.dtsi
@@ -53,6 +53,10 @@
status = "disabled";
};
+&main_gpio1 {
+ bootph-all;
+};
+
#if IS_ENABLED(CONFIG_TARGET_J722S_R5_BEAGLEY_AI)
&binman {
--
2.47.0
next prev parent reply other threads:[~2025-04-11 22:57 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-11 22:57 [PATCH 0/9] board: beagle: beagley-ai: Cleanups and Nishanth Menon
2025-04-11 22:57 ` [PATCH 1/9] board: beagle: beagley-ai: Add pattern match for MAINTAINERS Nishanth Menon
2025-04-11 22:57 ` Nishanth Menon [this message]
2025-04-11 22:59 ` [PATCH 2/9] arch: arm: dts: k3-am67a-beagley-ai-u-boot: Mark main_gpio1 as bootph-all Nishanth Menon
2025-04-11 22:57 ` [PATCH 3/9] beagle: beagley-ai: env: Set up the boot devices and boot methods Nishanth Menon
2025-04-11 22:57 ` [PATCH 4/9] beagle: beagley-ai: env: Setup scripts for LED control Nishanth Menon
2025-04-11 22:57 ` [PATCH 5/9] beagle: beagley-ai: env: Enable DFU env options Nishanth Menon
2025-04-11 22:57 ` [PATCH 6/9] configs: am67a_beagley_ai*: Use saveddefconfig Nishanth Menon
2025-04-14 13:49 ` Andrew Davis
2025-04-11 22:57 ` [PATCH 7/9] configs:am67a_beagley_ai*: Drop un-necessary config options Nishanth Menon
2025-04-11 22:57 ` [PATCH 8/9] configs: am67a_beagley_ai_a53: Enable additional features Nishanth Menon
2025-04-14 13:51 ` Andrew Davis
2025-04-17 23:03 ` Jon Humphreys
2025-04-18 19:06 ` Nishanth Menon
2025-04-11 22:57 ` [PATCH 9/9] doc: beagle: Add BeagleY-AI documentation Nishanth Menon
2025-04-14 14:02 ` Andrew Davis
2025-04-17 23:05 ` [PATCH 0/9] board: beagle: beagley-ai: Cleanups and Jon Humphreys
2025-04-18 19:07 ` Nishanth Menon
-- strict thread matches above, loose matches on Subject: below --
2025-04-25 17:31 [PATCH 0/9] board: beagle: beagley-ai: Cleanups and stdboot Nishanth Menon
2025-04-25 17:31 ` [PATCH 2/9] arch: arm: dts: k3-am67a-beagley-ai-u-boot: Mark main_gpio1 as bootph-all Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250411225717.3117370-3-nm@ti.com \
--to=nm@ti.com \
--cc=afd@ti.com \
--cc=b-padhi@ti.com \
--cc=j-humphreys@ti.com \
--cc=n-francis@ti.com \
--cc=robertcnelson@gmail.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
--cc=u-kumar1@ti.com \
--cc=xypron.glpk@gmx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox