[PATCH 4/9] beagle: beagley-ai: env: Setup scripts for LED control

[Nishanth Menon <nm@ti.com>]

Most of the users of BeagleY-AI are headless OR do not use serial port.
In such cases, it is very useful for the device to provide some level of
indication to know what state their board is at.

Unfortunately, with a single LED, the options are limited. This is a
precursor patch to actually enabling the LED options that will use the
same in the follow on patches.

Signed-off-by: Nishanth Menon <nm@ti.com>
---
 board/beagle/beagley-ai/beagley-ai.env | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/board/beagle/beagley-ai/beagley-ai.env b/board/beagle/beagley-ai/beagley-ai.env
index db29d13420aa..16a03acfca3c 100644
--- a/board/beagle/beagley-ai/beagley-ai.env
+++ b/board/beagle/beagley-ai/beagley-ai.env
@@ -10,6 +10,8 @@ console=ttyS2,115200n8
 args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02800000
 	${mtdparts}
 run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
+set_led_state_fail_load=led led-0 off
+set_led_state_start_load=led led-0 on
 
 boot_targets=mmc1
 bootmeths=script extlinux efi pxe
-- 
2.47.0