U-Boot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Tim Harvey <tharvey@gateworks.com>
To: u-boot@lists.denx.de, Stefano Babic <sbabic@nabladev.com>
Cc: Fabio Estevam <festevam@gmail.com>,
	"NXP i . MX U-Boot Team" <uboot-imx@nxp.com>,
	Tim Harvey <tharvey@gateworks.com>
Subject: [PATCH 01/13] configs: imx8m*_venice: enable several commands useful for scripting
Date: Fri, 23 May 2025 10:20:06 -0700	[thread overview]
Message-ID: <20250523172018.4164647-1-tharvey@gateworks.com> (raw)

enable cat, xxd, and the ability for setexpr to return values in
variables which are all useful for scripting.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
 configs/imx8mm_venice_defconfig | 3 +++
 configs/imx8mn_venice_defconfig | 3 +++
 configs/imx8mp_venice_defconfig | 3 +++
 3 files changed, 9 insertions(+)

diff --git a/configs/imx8mm_venice_defconfig b/configs/imx8mm_venice_defconfig
index 051cd7efa81a..25fc1aa0ce63 100644
--- a/configs/imx8mm_venice_defconfig
+++ b/configs/imx8mm_venice_defconfig
@@ -66,6 +66,9 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_CAT=y
+CONFIG_CMD_SETEXPR_FMT=y
+CONFIG_CMD_XXD=y
 CONFIG_CMD_DHCP6=y
 CONFIG_CMD_TFTPPUT=y
 CONFIG_SYS_DISABLE_AUTOLOAD=y
diff --git a/configs/imx8mn_venice_defconfig b/configs/imx8mn_venice_defconfig
index fd8701e11a43..7a22535e5c9a 100644
--- a/configs/imx8mn_venice_defconfig
+++ b/configs/imx8mn_venice_defconfig
@@ -66,6 +66,9 @@ CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_CAT=y
+CONFIG_CMD_SETEXPR_FMT=y
+CONFIG_CMD_XXD=y
 CONFIG_CMD_DHCP6=y
 CONFIG_CMD_TFTPPUT=y
 CONFIG_SYS_DISABLE_AUTOLOAD=y
diff --git a/configs/imx8mp_venice_defconfig b/configs/imx8mp_venice_defconfig
index b91e69a25e2e..8aa9232cc8df 100644
--- a/configs/imx8mp_venice_defconfig
+++ b/configs/imx8mp_venice_defconfig
@@ -68,6 +68,9 @@ CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_CAT=y
+CONFIG_CMD_SETEXPR_FMT=y
+CONFIG_CMD_XXD=y
 CONFIG_CMD_DHCP6=y
 CONFIG_CMD_TFTPPUT=y
 CONFIG_SYS_DISABLE_AUTOLOAD=y
-- 
2.25.1


             reply	other threads:[~2025-05-23 17:20 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-23 17:20 Tim Harvey [this message]
2025-05-23 17:20 ` [PATCH 02/13] configs: imx8m*_venice: enable GPT support Tim Harvey
2025-05-26  8:21   ` Peng Fan
2025-05-23 17:20 ` [PATCH 03/13] board: venice: move soc-specific dram config into soc-specific files Tim Harvey
2025-05-26  8:21   ` Peng Fan
2025-05-23 17:20 ` [PATCH 04/13] board: venice: fix dram bus config for GW7902/GW7903/GW7904 Tim Harvey
2025-05-26  8:20   ` Peng Fan
2025-05-23 17:20 ` [PATCH 05/13] board: venice: fix dram size for GW7901-SP486 Tim Harvey
2025-05-26  8:20   ` Peng Fan
2025-05-23 17:20 ` [PATCH 06/13] board: venice: use baseboard model for family Tim Harvey
2025-05-26  8:20   ` Peng Fan
2025-05-23 17:20 ` [PATCH 07/13] board: venice: use SOM model for PMIC adjustment on SOM Tim Harvey
2025-05-26  8:19   ` Peng Fan
2025-05-23 17:20 ` [PATCH 08/13] board: venice: flip logic for GSC supervisor enable Tim Harvey
2025-05-26  8:19   ` Peng Fan
2025-05-23 17:20 ` [PATCH 09/13] board: venice: add imx8mp-gw82xx support Tim Harvey
2025-05-26  8:19   ` Peng Fan
2025-05-23 17:20 ` [PATCH 10/13] board: venice: add FSA support Tim Harvey
2025-05-26  8:19   ` Peng Fan
2025-05-23 17:20 ` [PATCH 11/13] board: venice: update model representation for venice-flex Tim Harvey
2025-05-26  8:18   ` Peng Fan
2025-05-23 17:20 ` [PATCH 12/13] board: venice: append configuration string to model Tim Harvey
2025-05-26  8:18   ` Peng Fan
2025-05-23 17:20 ` [PATCH 13/13] imx8mp-venice-gw74xx: add w_disable2 gpio configuration Tim Harvey
2025-05-26  8:17   ` Peng Fan
2025-05-26  8:21 ` [PATCH 01/13] configs: imx8m*_venice: enable several commands useful for scripting Peng Fan
2025-06-01 13:32 ` Fabio Estevam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250523172018.4164647-1-tharvey@gateworks.com \
    --to=tharvey@gateworks.com \
    --cc=festevam@gmail.com \
    --cc=sbabic@nabladev.com \
    --cc=u-boot@lists.denx.de \
    --cc=uboot-imx@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox