From: Eric Chung <eric.chung@riscstar.com>
To: u-boot-spacemit@groups.io, u-boot@lists.denx.de
Cc: Tom Rini <trini@konsulko.com>, Peng Fan <peng.fan@nxp.com>,
Huan Zhou <pericycle.cc@gmail.com>,
Raymond Mao <raymond.mao@riscstar.com>,
Jaehoon Chung <jh80.chung@samsung.com>,
Bhimeswararao Matsa <bhimeswararao.matsa@gmail.com>,
Tanmay Kathpalia <tanmay.kathpalia@altera.com>,
Kaustabh Chakraborty <kauschluss@disroot.org>,
Han Xu <han.xu@nxp.com>, Yanir Levin <yanir.levin@tandemg.com>,
Christoph Stoidner <c.stoidner@phytec.de>,
Balsundar Ponnusamy <balsundar.ponnusamy@altera.com>,
Daniel Palmer <daniel@thingy.jp>, Anshul Dalal <anshuld@ti.com>,
Bastien Curutchet <bastien.curutchet@bootlin.com>,
Angelo Dureghello <angelo@kernel-space.org>,
Johan Jonker <jbx6244@gmail.com>, Rick Chen <rick@andestech.com>,
Leo <ycliang@andestech.com>,
Sam Protsenko <semen.protsenko@linaro.org>,
Guodong Xu <guodong.xu@riscstar.com>,
Eric Chung <eric.chung@riscstar.com>
Subject: [PATCH v2 0/8] spacemit mmc driver
Date: Mon, 29 Jun 2026 23:51:14 +0800 [thread overview]
Message-ID: <20260629-m4-v2-0-cbc91c6b83d8@riscstar.com> (raw)
This series adds MMC support for the SpacemiT K1: an SDHCI platform
driver, the SD card device-tree overlay, defconfig options, and SPL
boot-device selection from the SoC strap/config registers. The SDHCI
driver is usable in both SPL and U-Boot proper.
A flashing guide (doc/board/spacemit/k1-flash.rst) describes how to
write images to eMMC.
This series sits on top of three series still under review, and must be
applied after them, in this order:
1. K1 clock/reset/dts migration [1] (8 patches)
2. K1 SPL bring-up v4 [2] (14 patches)
3. K1 pinctrl/GPIO and SPI NOR v2 [3] (9 patches)
Then this series (8 patches)
For each series:
b4 am <cover-msgid>
git am ./*.mbx
Link: https://lore.kernel.org/u-boot/20260526-b4-k1-clk-reset-upstream-dts-v2-0-af815e362b0c@riscstar.com/ [1]
Link: https://lore.kernel.org/u-boot/20260519-b4-k1-spl-bring-up-v4-0-3915a2a904c1@riscstar.com/ [2]
Link: https://lore.kernel.org/u-boot/20260520-b4-k1-spl-pinctrl-spinor-v2-0-8d25db98ac8e@riscstar.com/ [3]
---
Changes in v2:
- EDITME: describe what is new in this series revision.
- EDITME: use bulletpoints and terse descriptions.
- Link to v1: https://patch.msgid.link/20260629-m4-v1-0-a11f8d496e62@riscstar.com
Changes in v2:
- cmd: drop patches on eminfo & tlv_eeprom.
- configs: Enable ADMA and SYSCON support.
- dts: Use vmmc-supply as vqmmc-supply on the SD card node.
- mmc: k1: Enable ADMA mode support, use CMD23 for multi-block
read/write, correct pinctrl state from "fast" to "uhs".
- mmc: sdhci: Add new quirk patch to enable CMD23 for multi-block
transfers.
- pinctrl: k1: Add new IO power domain configuration support for
dual-voltage GPIO banks.
- spacemit: k1: Use FIELD_GET() to parse boot strap mode.
- Link to v1: https://lore.kernel.org/u-boot/20260521-k1-spl-mmc-sdcard-v1-0-1bd14b8c4f9f@riscstar.com/
To: u-boot-spacemit@groups.io
To: u-boot@lists.denx.de
Cc: Huan Zhou <pericycle.cc@gmail.com>
Cc: Guodong Xu <guodong.xu@riscstar.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Raymond Mao <raymond.mao@riscstar.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Bhimeswararao Matsa <bhimeswararao.matsa@gmail.com>
Cc: Tanmay Kathpalia <tanmay.kathpalia@altera.com>
Cc: Kaustabh Chakraborty <kauschluss@disroot.org>
Cc: Han Xu <han.xu@nxp.com>
Cc: Yanir Levin <yanir.levin@tandemg.com>
Cc: Christoph Stoidner <c.stoidner@phytec.de>
Cc: Balsundar Ponnusamy <balsundar.ponnusamy@altera.com>
Cc: Daniel Palmer <daniel@thingy.jp>
Cc: Anshul Dalal <anshuld@ti.com>
Cc: Bastien Curutchet <bastien.curutchet@bootlin.com>
Cc: Angelo Dureghello <angelo@kernel-space.org>
Cc: Johan Jonker <jbx6244@gmail.com>
Cc: Rick Chen <rick@andestech.com>
Cc: Leo <ycliang@andestech.com>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Eric Chung <eric.chung@riscstar.com>
---
Eric Chung (8):
pinctrl: k1: add IO power domain configuration support
mmc: sdhci: add quirk to enable CMD23 for multi-block transfers
mmc: k1: add sdhci platform driver
dts: k1: add SD card support in u-boot overlay
configs: k1: enable SD and eMMC support
doc: spacemit: flash on K1 SoC based boards
config: k1: enable ENV support for eMMC
spacemit: k1: load product name from environment variable
arch/riscv/dts/k1-bananapi-f3-u-boot.dtsi | 87 +++-
arch/riscv/dts/k1-musepi-pro-u-boot.dtsi | 82 +++-
board/spacemit/k1/MAINTAINERS | 3 +-
board/spacemit/k1/spl.c | 50 +--
configs/spacemit_k1_defconfig | 26 +-
doc/board/spacemit/index.rst | 1 +
doc/board/spacemit/k1-flash.rst | 157 +++++++
drivers/mmc/Kconfig | 7 +
drivers/mmc/Makefile | 1 +
drivers/mmc/mmc.c | 22 +-
drivers/mmc/sdhci.c | 3 +
drivers/mmc/spacemit_sdhci.c | 681 ++++++++++++++++++++++++++++++
drivers/pinctrl/spacemit/pinctrl-k1.c | 84 +++-
include/mmc.h | 5 +-
include/sdhci.h | 1 +
15 files changed, 1157 insertions(+), 53 deletions(-)
---
base-commit: e7a6b33b153be98fcca16729e189f90c2d91a98c
change-id: 20260629-m4-98e01659fefb
Best regards,
--
Eric Chung <eric.chung@riscstar.com>
next reply other threads:[~2026-06-29 15:51 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-29 15:51 Eric Chung [this message]
2026-06-29 15:51 ` [PATCH v2 v2 1/8] pinctrl: k1: add IO power domain configuration support Eric Chung
2026-06-30 8:55 ` Yao Zi
2026-06-29 15:51 ` [PATCH v2 v2 2/8] mmc: sdhci: add quirk to enable CMD23 for multi-block transfers Eric Chung
2026-06-30 2:47 ` Peng Fan
2026-06-29 15:51 ` [PATCH v2 v2 3/8] mmc: k1: add sdhci platform driver Eric Chung
2026-06-30 2:52 ` Peng Fan
2026-06-29 15:51 ` [PATCH v2 v2 4/8] dts: k1: add SD card support in u-boot overlay Eric Chung
2026-06-30 2:56 ` Peng Fan
2026-06-29 15:51 ` [PATCH v2 v2 5/8] configs: k1: enable SD and eMMC support Eric Chung
2026-06-29 15:51 ` [PATCH v2 v2 6/8] doc: spacemit: flash on K1 SoC based boards Eric Chung
2026-06-29 15:51 ` [PATCH v2 v2 7/8] config: k1: enable ENV support for eMMC Eric Chung
2026-06-29 15:51 ` [PATCH v2 v2 8/8] spacemit: k1: load product name from environment variable Eric Chung
2026-06-30 2:55 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260629-m4-v2-0-cbc91c6b83d8@riscstar.com \
--to=eric.chung@riscstar.com \
--cc=angelo@kernel-space.org \
--cc=anshuld@ti.com \
--cc=balsundar.ponnusamy@altera.com \
--cc=bastien.curutchet@bootlin.com \
--cc=bhimeswararao.matsa@gmail.com \
--cc=c.stoidner@phytec.de \
--cc=daniel@thingy.jp \
--cc=guodong.xu@riscstar.com \
--cc=han.xu@nxp.com \
--cc=jbx6244@gmail.com \
--cc=jh80.chung@samsung.com \
--cc=kauschluss@disroot.org \
--cc=peng.fan@nxp.com \
--cc=pericycle.cc@gmail.com \
--cc=raymond.mao@riscstar.com \
--cc=rick@andestech.com \
--cc=semen.protsenko@linaro.org \
--cc=tanmay.kathpalia@altera.com \
--cc=trini@konsulko.com \
--cc=u-boot-spacemit@groups.io \
--cc=u-boot@lists.denx.de \
--cc=yanir.levin@tandemg.com \
--cc=ycliang@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox