From: Eric Chung <eric.chung@riscstar.com>
To: u-boot-spacemit@groups.io, u-boot@lists.denx.de
Cc: Tom Rini <trini@konsulko.com>, Peng Fan <peng.fan@nxp.com>,
Huan Zhou <pericycle.cc@gmail.com>,
Raymond Mao <raymond.mao@riscstar.com>,
Jaehoon Chung <jh80.chung@samsung.com>,
Bhimeswararao Matsa <bhimeswararao.matsa@gmail.com>,
Tanmay Kathpalia <tanmay.kathpalia@altera.com>,
Kaustabh Chakraborty <kauschluss@disroot.org>,
Han Xu <han.xu@nxp.com>, Yanir Levin <yanir.levin@tandemg.com>,
Christoph Stoidner <c.stoidner@phytec.de>,
Balsundar Ponnusamy <balsundar.ponnusamy@altera.com>,
Daniel Palmer <daniel@thingy.jp>, Anshul Dalal <anshuld@ti.com>,
Bastien Curutchet <bastien.curutchet@bootlin.com>,
Angelo Dureghello <angelo@kernel-space.org>,
Johan Jonker <jbx6244@gmail.com>, Rick Chen <rick@andestech.com>,
Leo <ycliang@andestech.com>,
Sam Protsenko <semen.protsenko@linaro.org>,
Guodong Xu <guodong.xu@riscstar.com>,
Eric Chung <eric.chung@riscstar.com>
Subject: [PATCH v2 v2 5/8] configs: k1: enable SD and eMMC support
Date: Mon, 29 Jun 2026 23:51:19 +0800 [thread overview]
Message-ID: <20260629-m4-v2-5-cbc91c6b83d8@riscstar.com> (raw)
In-Reply-To: <20260629-m4-v2-0-cbc91c6b83d8@riscstar.com>
Enable high-speed MMC modes.
Signed-off-by: Eric Chung <eric.chung@riscstar.com>
---
v2:
- Enable ADMA support.
- Enable SYSCON support.
---
board/spacemit/k1/MAINTAINERS | 1 +
configs/spacemit_k1_defconfig | 19 +++++++++++++++++++
2 files changed, 20 insertions(+)
diff --git a/board/spacemit/k1/MAINTAINERS b/board/spacemit/k1/MAINTAINERS
index 32d47ecc8f1..ca994e2a1fb 100644
--- a/board/spacemit/k1/MAINTAINERS
+++ b/board/spacemit/k1/MAINTAINERS
@@ -9,6 +9,7 @@ F: configs/spacemit_k1_defconfig
F: doc/board/spacemit/bananapi-f3.rst
F: drivers/gpio/spacemit_gpio.c
F: drivers/i2c/k1_i2c.c
+F: drivers/mmc/spacemit_sdhci.c
F: drivers/pinctrl/spacemit/
F: drivers/power/pmic/pmic_spacemit_p1.c
F: drivers/power/regulator/spacemit_p1_regulator.c
diff --git a/configs/spacemit_k1_defconfig b/configs/spacemit_k1_defconfig
index 81409c844a6..886679367a9 100644
--- a/configs/spacemit_k1_defconfig
+++ b/configs/spacemit_k1_defconfig
@@ -23,6 +23,7 @@ CONFIG_DEBUG_UART_BASE=0xd4017000
CONFIG_DEBUG_UART_CLOCK=14700000
CONFIG_TARGET_SPACEMIT_K1=y
CONFIG_ARCH_RV64I=y
+CONFIG_RISCV_ISA_ZICBOM=y
CONFIG_RISCV_SMODE=y
CONFIG_SPL_RISCV_MMODE=y
# CONFIG_SPL_SMP is not set
@@ -48,6 +49,7 @@ CONFIG_SPL_CMD_TLV_EEPROM=y
CONFIG_OF_UPSTREAM=y
CONFIG_ENV_OVERWRITE=y
CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
CONFIG_SPL_SYSCON=y
CONFIG_CLK=y
CONFIG_CLK_CCF=y
@@ -87,6 +89,21 @@ CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_MEM=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x000a0000
CONFIG_CMD_SPI=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ADMA=y
+CONFIG_MMC_SDHCI_SPACEMIT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_HS200_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x4
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MEMINFO_MAP=y
+CONFIG_EFI_PARTITION=y
CONFIG_SPL_SPI=y
CONFIG_SPL_DM_SPI=y
CONFIG_SPL_DM_SPI_FLASH=y
@@ -94,3 +111,5 @@ CONFIG_SPL_SPI_LOAD=y
CONFIG_SPL_SPI_FLASH_TINY=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
--
2.51.0
next prev parent reply other threads:[~2026-06-29 15:52 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-29 15:51 [PATCH v2 0/8] spacemit mmc driver Eric Chung
2026-06-29 15:51 ` [PATCH v2 v2 1/8] pinctrl: k1: add IO power domain configuration support Eric Chung
2026-06-30 8:55 ` Yao Zi
2026-06-29 15:51 ` [PATCH v2 v2 2/8] mmc: sdhci: add quirk to enable CMD23 for multi-block transfers Eric Chung
2026-06-30 2:47 ` Peng Fan
2026-06-29 15:51 ` [PATCH v2 v2 3/8] mmc: k1: add sdhci platform driver Eric Chung
2026-06-30 2:52 ` Peng Fan
2026-06-29 15:51 ` [PATCH v2 v2 4/8] dts: k1: add SD card support in u-boot overlay Eric Chung
2026-06-30 2:56 ` Peng Fan
2026-06-29 15:51 ` Eric Chung [this message]
2026-06-29 15:51 ` [PATCH v2 v2 6/8] doc: spacemit: flash on K1 SoC based boards Eric Chung
2026-06-29 15:51 ` [PATCH v2 v2 7/8] config: k1: enable ENV support for eMMC Eric Chung
2026-06-29 15:51 ` [PATCH v2 v2 8/8] spacemit: k1: load product name from environment variable Eric Chung
2026-06-30 2:55 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260629-m4-v2-5-cbc91c6b83d8@riscstar.com \
--to=eric.chung@riscstar.com \
--cc=angelo@kernel-space.org \
--cc=anshuld@ti.com \
--cc=balsundar.ponnusamy@altera.com \
--cc=bastien.curutchet@bootlin.com \
--cc=bhimeswararao.matsa@gmail.com \
--cc=c.stoidner@phytec.de \
--cc=daniel@thingy.jp \
--cc=guodong.xu@riscstar.com \
--cc=han.xu@nxp.com \
--cc=jbx6244@gmail.com \
--cc=jh80.chung@samsung.com \
--cc=kauschluss@disroot.org \
--cc=peng.fan@nxp.com \
--cc=pericycle.cc@gmail.com \
--cc=raymond.mao@riscstar.com \
--cc=rick@andestech.com \
--cc=semen.protsenko@linaro.org \
--cc=tanmay.kathpalia@altera.com \
--cc=trini@konsulko.com \
--cc=u-boot-spacemit@groups.io \
--cc=u-boot@lists.denx.de \
--cc=yanir.levin@tandemg.com \
--cc=ycliang@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox