From: Bradley Morgan <brads@mainlining.org>
To: Tom Rini <trini@konsulko.com>, u-boot@lists.u-boot-project.org
Cc: "Bradley Morgan" <brads@mainlining.org>,
"Marek Behún" <kabel@kernel.org>,
"Peng Fan" <peng.fan@oss.nxp.com>
Subject: [PATCH v3 13/26] powerpc: mpc85xx: Remove P1011 support
Date: Wed, 21 Oct 2026 16:01:09 +0000 [thread overview]
Message-ID: <20261021160145.10430-14-brads@mainlining.org> (raw)
In-Reply-To: <20261021160145.10430-1-brads@mainlining.org>
No board in the tree selects ARCH_P1011, and the SoC lacks active
community maintenance. Remove the unused SoC configuration, CPU
identification, and stale boot documentation entry.
Signed-off-by: Bradley Morgan <brads@mainlining.org>
---
arch/Kconfig | 2 +-
arch/powerpc/cpu/mpc85xx/Kconfig | 20 +-------------------
arch/powerpc/cpu/mpc85xx/Makefile | 1 -
arch/powerpc/cpu/mpc8xxx/cpu.c | 1 -
arch/powerpc/include/asm/processor.h | 1 -
doc/README.mpc85xx-sd-spi-boot | 1 -
6 files changed, 2 insertions(+), 24 deletions(-)
diff --git a/arch/Kconfig b/arch/Kconfig
index 8d63afeb138..07214f2af7c 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -470,7 +470,7 @@ config SYS_IMMR
default 0xF0000000 if ARCH_MPC8313
default 0xE0000000 if MPC83xx && !ARCH_MPC8313
default 0x01000000 if ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3
- default 0xFFE00000 if ARCH_P1010 || ARCH_P1011 || ARCH_P1020 || \
+ default 0xFFE00000 if ARCH_P1010 || ARCH_P1020 || \
ARCH_P1021 || ARCH_P1024 || ARCH_P1025 || \
ARCH_P2020
default SYS_CCSRBAR_DEFAULT
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index b1b134ca990..ab66ffadebd 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -399,21 +399,6 @@ config ARCH_P1010
imply FSL_SATA
imply TIMESTAMP
-config ARCH_P1011
- bool
- select FSL_LAW
- select SYS_FSL_ERRATUM_A004508
- select SYS_FSL_ERRATUM_A005125
- select SYS_FSL_ERRATUM_ELBC_A001
- select SYS_FSL_ERRATUM_ESDHC111
- select FSL_PCIE_DISABLE_ASPM
- select SYS_FSL_HAS_DDR3
- select SYS_FSL_HAS_SEC
- select SYS_FSL_SEC_BE
- select SYS_FSL_SEC_COMPAT_2
- select SYS_PPC_E500_USE_DEBUG_TLB
- select FSL_ELBC
-
config ARCH_P1020
bool
select BTB
@@ -831,7 +816,6 @@ config SYS_CCSRBAR_DEFAULT
ARCH_MPC8544 || \
ARCH_MPC8560 || \
ARCH_P1010 || \
- ARCH_P1011 || \
ARCH_P1020 || \
ARCH_P1021 || \
ARCH_P1024 || \
@@ -1041,7 +1025,6 @@ config SYS_FSL_NUM_LAWS
ARCH_BSC9132 || \
ARCH_MPC8536 || \
ARCH_P1010 || \
- ARCH_P1011 || \
ARCH_P1020 || \
ARCH_P1021 || \
ARCH_P1023 || \
@@ -1156,8 +1139,7 @@ config SYS_PPC_E500_DEBUG_TLB
depends on SYS_PPC_E500_USE_DEBUG_TLB
default 0 if ARCH_MPC8544
default 1 if ARCH_MPC8536
- default 2 if ARCH_P1011 || \
- ARCH_P1020 || \
+ default 2 if ARCH_P1020 || \
ARCH_P1021 || \
ARCH_P1024 || \
ARCH_P1025 || \
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 93b0c28ca03..f78131dd61a 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -54,7 +54,6 @@ obj-$(CONFIG_SYS_FSL_QORIQ_CHASSIS2) += fsl_corenet2_serdes.o
obj-$(CONFIG_ARCH_MPC8536) += mpc8536_serdes.o
obj-$(CONFIG_ARCH_MPC8544) += mpc8544_serdes.o
obj-$(CONFIG_ARCH_P1010) += p1010_serdes.o
-obj-$(CONFIG_ARCH_P1011) += p1021_serdes.o
obj-$(CONFIG_ARCH_P1020) += p1021_serdes.o
obj-$(CONFIG_ARCH_P1021) += p1021_serdes.o
obj-$(CONFIG_ARCH_P1023) += p1023_serdes.o
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 2ee7348391a..efbbbced132 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -41,7 +41,6 @@ static struct cpu_type cpu_type_list[] = {
CPU_TYPE_ENTRY(8569, 8569, 1),
CPU_TYPE_ENTRY(8572, 8572, 2),
CPU_TYPE_ENTRY(P1010, P1010, 1),
- CPU_TYPE_ENTRY(P1011, P1011, 1),
CPU_TYPE_ENTRY(P1012, P1012, 1),
CPU_TYPE_ENTRY(P1013, P1013, 1),
CPU_TYPE_ENTRY(P1014, P1014, 1),
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 1d6f960be94..36d8660cddc 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1033,7 +1033,6 @@
#define SVR_8569 0x808000
#define SVR_8572 0x80E000
#define SVR_P1010 0x80F100
-#define SVR_P1011 0x80E500
#define SVR_P1012 0x80E501
#define SVR_P1013 0x80E700
#define SVR_P1014 0x80F101
diff --git a/doc/README.mpc85xx-sd-spi-boot b/doc/README.mpc85xx-sd-spi-boot
index 8e98fc9f659..086c8f9e49b 100644
--- a/doc/README.mpc85xx-sd-spi-boot
+++ b/doc/README.mpc85xx-sd-spi-boot
@@ -60,7 +60,6 @@ P2020DS config_sram_p2020ds.dat
P1020RDB config_ddr2_1g_p1020rdb_533M.dat
P1020RDB config_ddr2_1g_p1020rdb_667M.dat
P1020RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
-P1011RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
P1010RDB config_ddr3_1gb_p1010rdb_800M.dat
P1021RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
P1022DS config_ddr3_2gb_p1022ds.dat
--
2.47.3
next prev parent reply other threads:[~2026-10-21 16:16 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-21 16:00 [PATCH v3 00/26] powerpc: drop unmaintained boards and SoCs, take over maintenance Bradley Morgan
2026-10-21 16:00 ` [PATCH v3 01/26] board: powerpc: Remove MPC8548CDS support Bradley Morgan
2026-10-21 16:00 ` [PATCH v3 02/26] board: powerpc: Remove MPC837XERDB support Bradley Morgan
2026-10-21 18:09 ` Tom Rini
2026-10-22 1:25 ` Sinan Akman
2026-10-22 1:45 ` Tom Rini
2026-10-21 16:00 ` [PATCH v3 03/26] board: powerpc: Remove P2020RDB-PC support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 04/26] board: powerpc: Remove P3041DS support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 05/26] board: powerpc: Remove P4080DS support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 06/26] board: powerpc: Remove P5040DS support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 07/26] board: powerpc: Remove T1042D4RDB support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 08/26] powerpc: mpc85xx: Remove P3041 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 09/26] powerpc: mpc85xx: Remove P4080 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 10/26] powerpc: mpc85xx: Remove P5040 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 11/26] powerpc: mpc83xx: Remove MPC837x support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 12/26] powerpc: mpc85xx: Remove C29x support Bradley Morgan
2026-10-21 16:01 ` Bradley Morgan [this message]
2026-10-21 16:01 ` [PATCH v3 14/26] powerpc: mpc85xx: Remove P1023 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 15/26] powerpc: mpc85xx: Remove P1025 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 16/26] powerpc: mpc85xx: Remove MPC8536 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 17/26] powerpc: mpc85xx: Remove MPC8540 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 18/26] powerpc: mpc85xx: Remove MPC8560 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 19/26] powerpc: mpc85xx: Remove BSC9132 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 20/26] powerpc: mpc83xx: Remove MPC831x support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 21/26] powerpc: mpc83xx: Remove MPC834x support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 22/26] powerpc: mpc85xx: Remove P1024 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 23/26] powerpc: mpc85xx: Remove BSC9131 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 24/26] powerpc: mpc83xx: Remove MPC8309 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 25/26] powerpc: Remove MPC86xx support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 26/26] MAINTAINERS: powerpc: Add me as PowerPC maintainer Bradley Morgan
2026-10-26 23:47 ` [PATCH v3 00/26] powerpc: drop unmaintained boards and SoCs, take over maintenance Bradley Morgan
2026-10-26 23:50 ` Bradley Morgan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261021160145.10430-14-brads@mainlining.org \
--to=brads@mainlining.org \
--cc=kabel@kernel.org \
--cc=peng.fan@oss.nxp.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.u-boot-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox