From: Bradley Morgan <brads@mainlining.org>
To: Tom Rini <trini@konsulko.com>, u-boot@lists.u-boot-project.org
Cc: "Bradley Morgan" <brads@mainlining.org>,
"Marek Behún" <kabel@kernel.org>,
"Peng Fan" <peng.fan@oss.nxp.com>,
"Priyanka Jain" <priyanka.jain@nxp.com>
Subject: [PATCH v3 04/26] board: powerpc: Remove P3041DS support
Date: Wed, 21 Oct 2026 16:01:00 +0000 [thread overview]
Message-ID: <20261021160145.10430-5-brads@mainlining.org> (raw)
In-Reply-To: <20261021160145.10430-1-brads@mainlining.org>
The P3041DS development system is unmaintained and lacks active
community testing. Drop its target and device tree.
Signed-off-by: Bradley Morgan <brads@mainlining.org>
---
arch/powerpc/cpu/mpc85xx/Kconfig | 9 --
arch/powerpc/dts/Makefile | 1 -
arch/powerpc/dts/p3041.dtsi | 149 ---------------------------
arch/powerpc/dts/p3041ds.dts | 158 -----------------------------
arch/powerpc/dts/p3041si-post.dtsi | 43 --------
board/nxp/common/Makefile | 2 -
6 files changed, 362 deletions(-)
delete mode 100644 arch/powerpc/dts/p3041.dtsi
delete mode 100644 arch/powerpc/dts/p3041ds.dts
delete mode 100644 arch/powerpc/dts/p3041si-post.dtsi
diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 7e885014ebe..65081b5bd63 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -87,15 +87,6 @@ config TARGET_SOCRATES
select ARCH_MPC8544
select BINMAN
-config TARGET_P3041DS
- bool "Support P3041DS"
- select PHYS_64BIT
- select ARCH_P3041
- select BOARD_LATE_INIT if CHAIN_OF_TRUST
- select FSL_NGPIXIS
- imply SATA
- imply PANIC_HANG
-
config TARGET_P4080DS
bool "Support P4080DS"
select PHYS_64BIT
diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile
index e44d49cabdf..c603369e7cc 100644
--- a/arch/powerpc/dts/Makefile
+++ b/arch/powerpc/dts/Makefile
@@ -11,7 +11,6 @@ dtb-$(CONFIG_TARGET_P1010RDB_PA) += p1010rdb-pa.dtb p1010rdb-pa_36b.dtb
dtb-$(CONFIG_TARGET_P1010RDB_PB) += p1010rdb-pb.dtb p1010rdb-pb_36b.dtb
dtb-$(CONFIG_TARGET_P1020RDB_PC) += p1020rdb-pc.dtb p1020rdb-pc_36b.dtb
dtb-$(CONFIG_TARGET_P1020RDB_PD) += p1020rdb-pd.dtb
-dtb-$(CONFIG_TARGET_P3041DS) += p3041ds.dtb
dtb-$(CONFIG_TARGET_P4080DS) += p4080ds.dtb
dtb-$(CONFIG_TARGET_P5040DS) += p5040ds.dtb
dtb-$(CONFIG_TARGET_SOCRATES) += socrates.dtb
diff --git a/arch/powerpc/dts/p3041.dtsi b/arch/powerpc/dts/p3041.dtsi
deleted file mode 100644
index e34117b65a0..00000000000
--- a/arch/powerpc/dts/p3041.dtsi
+++ /dev/null
@@ -1,149 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
-/*
- * P3041 Silicon/SoC Device Tree Source (pre include)
- *
- * Copyright 2010 - 2015 Freescale Semiconductor Inc.
- * Copyright 2019-2020 NXP
- */
-
-/dts-v1/;
-
-/include/ "e500mc_power_isa.dtsi"
-
-/ {
- compatible = "fsl,P3041";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: PowerPC,e500mc@0 {
- device_type = "cpu";
- reg = <0>;
- fsl,portid-mapping = <0x80000000>;
- };
- cpu1: PowerPC,e500mc@1 {
- device_type = "cpu";
- reg = <1>;
- fsl,portid-mapping = <0x40000000>;
- };
- cpu2: PowerPC,e500mc@2 {
- device_type = "cpu";
- reg = <2>;
- fsl,portid-mapping = <0x20000000>;
- };
- cpu3: PowerPC,e500mc@3 {
- device_type = "cpu";
- reg = <3>;
- fsl,portid-mapping = <0x10000000>;
- };
- };
-
- soc: soc@ffe000000 {
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <4>;
- reg = <0x40000 0x40000>;
- compatible = "fsl,mpic", "chrp,open-pic";
- device_type = "open-pic";
- clock-frequency = <0x0>;
- };
-
- espi0: spi@110000 {
- compatible = "fsl,mpc8536-espi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x110000 0x1000>;
- fsl,espi-num-chipselects = <4>;
- status = "disabled";
- };
-
- usb0: usb@fe210000 {
- compatible = "fsl-usb2-mph";
- reg = <0x210000 0x1000>;
- phy_type = "utmi";
- };
-
- usb1: usb@fe211000 {
- compatible = "fsl-usb2-dr";
- reg = <0x211000 0x1000>;
- phy_type = "utmi";
- };
-
- sata: sata@220000 {
- compatible = "fsl,pq-sata-v2";
- reg = <0x220000 0x1000>;
- interrupts = <68 0x2 0 0>;
- sata-offset = <0x1000>;
- sata-number = <2>;
- sata-fpdma = <0>;
- };
-
- esdhc: esdhc@114000 {
- compatible = "fsl,esdhc";
- reg = <0x114000 0x1000>;
- clock-frequency = <0>;
- };
- /include/ "qoriq-i2c-0.dtsi"
- /include/ "qoriq-i2c-1.dtsi"
- };
-
- pcie@ffe200000 {
- compatible = "fsl,pcie-p3041", "fsl,pcie-fsl-qoriq";
- reg = <0xf 0xfe200000 0x0 0x1000>; /* registers */
- law_trgt_if = <0>;
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- bus-range = <0x0 0xff>;
- ranges = <0x01000000 0x0 0x00000000 0xf 0xf8000000 0x0 0x00010000 /* downstream I/O */
- 0x02000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000>; /* non-prefetchable memory */
- };
-
- pcie@ffe201000 {
- compatible = "fsl,pcie-p3041", "fsl,pcie-fsl-qoriq";
- reg = <0xf 0xfe201000 0x0 0x1000>; /* registers */
- law_trgt_if = <1>;
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- bus-range = <0x0 0xff>;
- ranges = <0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000 /* downstream I/O */
- 0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000>; /* non-prefetchable memory */
- };
-
- pcie@ffe202000 {
- compatible = "fsl,pcie-p3041", "fsl,pcie-fsl-qoriq";
- reg = <0xf 0xfe202000 0x0 0x1000>; /* registers */
- law_trgt_if = <2>;
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- bus-range = <0x0 0xff>;
- ranges = <0x01000000 0x0 0x00000000 0xf 0xf8020000 0x0 0x00010000 /* downstream I/O */
- 0x02000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000>; /* non-prefetchable memory */
- };
-
- pcie@ffe203000 {
- compatible = "fsl,pcie-p3041", "fsl,pcie-fsl-qoriq";
- reg = <0xf 0xfe203000 0x0 0x1000>; /* registers */
- law_trgt_if = <3>;
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- bus-range = <0x0 0xff>;
- ranges = <0x01000000 0x0 0x00000000 0xf 0xf8030000 0x0 0x00010000 /* downstream I/O */
- 0x02000000 0x0 0xe0000000 0xc 0x60000000 0x0 0x20000000>; /* non-prefetchable memory */
- };
-};
diff --git a/arch/powerpc/dts/p3041ds.dts b/arch/powerpc/dts/p3041ds.dts
deleted file mode 100644
index 069dae3b85b..00000000000
--- a/arch/powerpc/dts/p3041ds.dts
+++ /dev/null
@@ -1,158 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
-/*
- * P3041DS Device Tree Source
- *
- * Copyright 2010 - 2015 Freescale Semiconductor Inc.
- * Copyright 2019-2020 NXP
- */
-
-/include/ "p3041.dtsi"
-
-/ {
- model = "fsl,P3041DS";
- compatible = "fsl,P3041DS";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- aliases{
- phy_rgmii_0 = &phy_rgmii_0;
- phy_rgmii_1 = &phy_rgmii_1;
- phy_sgmii_1c = &phy_sgmii_1c;
- phy_sgmii_1d = &phy_sgmii_1d;
- phy_sgmii_1e = &phy_sgmii_1e;
- phy_sgmii_1f = &phy_sgmii_1f;
- phy_xgmii_1 = &phy_xgmii_1;
- phy_xgmii_2 = &phy_xgmii_2;
- emi1_rgmii = &hydra_mdio_rgmii;
- emi1_sgmii = &hydra_mdio_sgmii;
- emi2_xgmii = &hydra_mdio_xgmii;
- spi0 = &espi0;
- };
-
- soc: soc@ffe000000 {
- ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
- reg = <0xf 0xfe000000 0 0x00001000>;
- fman@400000{
- ethernet@e0000 {
- phy-handle = <&phy_sgmii_1c>;
- phy-connection-type = "sgmii";
- };
-
- ethernet@e2000 {
- phy-handle = <&phy_sgmii_1d>;
- phy-connection-type = "sgmii";
- };
-
- ethernet@e4000 {
- phy-handle = <&phy_sgmii_1e>;
- phy-connection-type = "sgmii";
- };
-
- ethernet@e6000 {
- phy-handle = <&phy_sgmii_1f>;
- phy-connection-type = "sgmii";
- };
-
- ethernet@e8000 {
- phy-handle = <&phy_rgmii_1>;
- phy-connection-type = "rgmii";
- };
-
- ethernet@f0000 {
- phy-handle = <&phy_xgmii_1>;
- phy-connection-type = "xgmii";
- };
-
- hydra_mdio_xgmii: mdio@f1000 {
- status = "disabled";
-
- phy_xgmii_1: ethernet-phy@4 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <0x4>;
- };
-
- phy_xgmii_2: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c45";
- reg = <0x0>;
- };
- };
- };
- };
-
- lbc: localbus@ffe124000 {
- reg = <0xf 0xfe124000 0 0x1000>;
- ranges = <0 0 0xf 0xe8000000 0x08000000
- 2 0 0xf 0xffa00000 0x00040000
- 3 0 0xf 0xffdf0000 0x00008000>;
-
- board-control@3,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
- reg = <3 0 0x30>;
- ranges = <0 3 0 0x30>;
-
- mdio-mux-emi1 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "mdio-mux-mmioreg", "mdio-mux";
- mdio-parent-bus = <&mdio0>;
- reg = <9 1>;
- mux-mask = <0x78>;
-
- hydra_mdio_rgmii: rgmii-mdio@8 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <8>;
- status = "disabled";
-
- phy_rgmii_0: ethernet-phy@0 {
- reg = <0x0>;
- };
-
- phy_rgmii_1: ethernet-phy@1 {
- reg = <0x1>;
- };
- };
-
- hydra_mdio_sgmii: sgmii-mdio@28 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x28>;
- status = "disabled";
-
- phy_sgmii_1c: ethernet-phy@1c {
- reg = <0x1c>;
- };
-
- phy_sgmii_1d: ethernet-phy@1d {
- reg = <0x1d>;
- };
-
- phy_sgmii_1e: ethernet-phy@1e {
- reg = <0x1e>;
- };
-
- phy_sgmii_1f: ethernet-phy@1f {
- reg = <0x1f>;
- };
- };
- };
- };
- };
-};
-
-&espi0 {
- status = "okay";
- flash@0 {
- compatible = "jedec,spi-nor";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- /* input clock */
- spi-max-frequency = <10000000>;
- };
-};
-
-/include/ "p3041si-post.dtsi"
diff --git a/arch/powerpc/dts/p3041si-post.dtsi b/arch/powerpc/dts/p3041si-post.dtsi
deleted file mode 100644
index a3e8088d25b..00000000000
--- a/arch/powerpc/dts/p3041si-post.dtsi
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * P3041 Silicon/SoC Device Tree Source (post include)
- *
- * Copyright 2011 - 2015 Freescale Semiconductor Inc.
- * Copyright 2020 NXP
- *
- */
-
-&soc {
-
-/include/ "qoriq-clockgen1.dtsi"
-/include/ "qoriq-gpio-0.dtsi"
-/include/ "qoriq-sec4.2-0.dtsi"
-
-/* include used FMan blocks */
-/include/ "qoriq-fman-0.dtsi"
-/include/ "qoriq-fman-0-1g-0.dtsi"
-/include/ "qoriq-fman-0-1g-1.dtsi"
-/include/ "qoriq-fman-0-1g-2.dtsi"
-/include/ "qoriq-fman-0-1g-3.dtsi"
-/include/ "qoriq-fman-0-1g-4.dtsi"
-/include/ "qoriq-fman-0-10g-0.dtsi"
- fman@400000 {
- enet0: ethernet@e0000 {
- };
-
- enet1: ethernet@e2000 {
- };
-
- enet2: ethernet@e4000 {
- };
-
- enet3: ethernet@e6000 {
- };
-
- enet4: ethernet@e8000 {
- };
-
- enet5: ethernet@f0000 {
- };
- };
-};
diff --git a/board/nxp/common/Makefile b/board/nxp/common/Makefile
index 46e43a4e45a..ba1aa084aa4 100644
--- a/board/nxp/common/Makefile
+++ b/board/nxp/common/Makefile
@@ -49,7 +49,6 @@ obj-$(CONFIG_DEEP_SLEEP) += mpc85xx_sleep.o
endif
-obj-$(CONFIG_TARGET_P3041DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P4080DS) += ics307_clk.o
obj-$(CONFIG_TARGET_P5040DS) += ics307_clk.o
ifeq ($(CONFIG_$(PHASE_)POWER_LEGACY),y)
@@ -67,7 +66,6 @@ obj-$(CONFIG_EMC2305) += emc2305.o
# deal with common files for P-series corenet based devices
obj-$(CONFIG_TARGET_P2041RDB) += p_corenet/
-obj-$(CONFIG_TARGET_P3041DS) += p_corenet/
obj-$(CONFIG_TARGET_P4080DS) += p_corenet/
obj-$(CONFIG_TARGET_P5040DS) += p_corenet/
--
2.47.3
next prev parent reply other threads:[~2026-10-21 16:16 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-21 16:00 [PATCH v3 00/26] powerpc: drop unmaintained boards and SoCs, take over maintenance Bradley Morgan
2026-10-21 16:00 ` [PATCH v3 01/26] board: powerpc: Remove MPC8548CDS support Bradley Morgan
2026-10-21 16:00 ` [PATCH v3 02/26] board: powerpc: Remove MPC837XERDB support Bradley Morgan
2026-10-21 18:09 ` Tom Rini
2026-10-22 1:25 ` Sinan Akman
2026-10-22 1:45 ` Tom Rini
2026-10-21 16:00 ` [PATCH v3 03/26] board: powerpc: Remove P2020RDB-PC support Bradley Morgan
2026-10-21 16:01 ` Bradley Morgan [this message]
2026-10-21 16:01 ` [PATCH v3 05/26] board: powerpc: Remove P4080DS support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 06/26] board: powerpc: Remove P5040DS support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 07/26] board: powerpc: Remove T1042D4RDB support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 08/26] powerpc: mpc85xx: Remove P3041 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 09/26] powerpc: mpc85xx: Remove P4080 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 10/26] powerpc: mpc85xx: Remove P5040 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 11/26] powerpc: mpc83xx: Remove MPC837x support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 12/26] powerpc: mpc85xx: Remove C29x support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 13/26] powerpc: mpc85xx: Remove P1011 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 14/26] powerpc: mpc85xx: Remove P1023 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 15/26] powerpc: mpc85xx: Remove P1025 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 16/26] powerpc: mpc85xx: Remove MPC8536 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 17/26] powerpc: mpc85xx: Remove MPC8540 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 18/26] powerpc: mpc85xx: Remove MPC8560 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 19/26] powerpc: mpc85xx: Remove BSC9132 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 20/26] powerpc: mpc83xx: Remove MPC831x support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 21/26] powerpc: mpc83xx: Remove MPC834x support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 22/26] powerpc: mpc85xx: Remove P1024 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 23/26] powerpc: mpc85xx: Remove BSC9131 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 24/26] powerpc: mpc83xx: Remove MPC8309 support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 25/26] powerpc: Remove MPC86xx support Bradley Morgan
2026-10-21 16:01 ` [PATCH v3 26/26] MAINTAINERS: powerpc: Add me as PowerPC maintainer Bradley Morgan
2026-10-26 23:47 ` [PATCH v3 00/26] powerpc: drop unmaintained boards and SoCs, take over maintenance Bradley Morgan
2026-10-26 23:50 ` Bradley Morgan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261021160145.10430-5-brads@mainlining.org \
--to=brads@mainlining.org \
--cc=kabel@kernel.org \
--cc=peng.fan@oss.nxp.com \
--cc=priyanka.jain@nxp.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.u-boot-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox