* [RESEND PATCH v2] clk: update clk_clean_rate_cache to use private clk struct
@ 2022-07-12 12:24 Patrick Delaunay
2022-08-13 4:11 ` Sean Anderson
0 siblings, 1 reply; 2+ messages in thread
From: Patrick Delaunay @ 2022-07-12 12:24 UTC (permalink / raw)
To: u-boot
Cc: Tero Kristo, Sean Anderson, Tero Kristo, Patrick Delaunay,
Lukasz Majewski, Sean Anderson, U-Boot STM32
In clk_clean_rate_cache, clk->rate should update the private clock
struct, in particular when CCF is activated, to save the cached
rate value.
When clk_get_parent_rate is called, the cached information
is read from pclk->rate, with pclk = clk_get_parent(clk).
As the cached is read from private clk data, the update should
be done also on it.
Fixes: 6b7fd3128f7 ("clk: fix set_rate to clean up cached rates for the hierarchy")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---
Changes in v2:
- set *clkp = clk when CCF is not activated and when the clock is not found
drivers/clk/clk-uclass.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c
index b89c77bf794..5cfa022a6dc 100644
--- a/drivers/clk/clk-uclass.c
+++ b/drivers/clk/clk-uclass.c
@@ -544,6 +544,19 @@ ulong clk_round_rate(struct clk *clk, ulong rate)
return ops->round_rate(clk, rate);
}
+static void clk_get_priv(struct clk *clk, struct clk **clkp)
+{
+ *clkp = clk;
+
+ /* get private clock struct associated to the provided clock */
+ if (CONFIG_IS_ENABLED(CLK_CCF)) {
+ /* Take id 0 as a non-valid clk, such as dummy */
+ if (clk->id)
+ clk_get_by_id(clk->id, clkp);
+ }
+}
+
+/* clean cache, called with private clock struct */
static void clk_clean_rate_cache(struct clk *clk)
{
struct udevice *child_dev;
@@ -563,6 +576,7 @@ static void clk_clean_rate_cache(struct clk *clk)
ulong clk_set_rate(struct clk *clk, ulong rate)
{
const struct clk_ops *ops;
+ struct clk *clkp;
debug("%s(clk=%p, rate=%lu)\n", __func__, clk, rate);
if (!clk_valid(clk))
@@ -572,8 +586,10 @@ ulong clk_set_rate(struct clk *clk, ulong rate)
if (!ops->set_rate)
return -ENOSYS;
+ /* get private clock struct used for cache */
+ clk_get_priv(clk, &clkp);
/* Clean up cached rates for us and all child clocks */
- clk_clean_rate_cache(clk);
+ clk_clean_rate_cache(clkp);
return ops->set_rate(clk, rate);
}
--
2.25.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [RESEND PATCH v2] clk: update clk_clean_rate_cache to use private clk struct
2022-07-12 12:24 [RESEND PATCH v2] clk: update clk_clean_rate_cache to use private clk struct Patrick Delaunay
@ 2022-08-13 4:11 ` Sean Anderson
0 siblings, 0 replies; 2+ messages in thread
From: Sean Anderson @ 2022-08-13 4:11 UTC (permalink / raw)
To: Patrick Delaunay, u-boot
Cc: Tero Kristo, Sean Anderson, Tero Kristo, Lukasz Majewski,
U-Boot STM32
Hi Patrick,
Sorry for the (very late) response.
On 7/12/22 8:24 AM, Patrick Delaunay wrote:
> In clk_clean_rate_cache, clk->rate should update the private clock
> struct, in particular when CCF is activated, to save the cached
> rate value.
>
> When clk_get_parent_rate is called, the cached information
> is read from pclk->rate, with pclk = clk_get_parent(clk).
>
> As the cached is read from private clk data, the update should
> be done also on it.
>
> Fixes: 6b7fd3128f7 ("clk: fix set_rate to clean up cached rates for the hierarchy")
> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
>
> Changes in v2:
> - set *clkp = clk when CCF is not activated and when the clock is not found
>
> drivers/clk/clk-uclass.c | 18 +++++++++++++++++-
> 1 file changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c
> index b89c77bf794..5cfa022a6dc 100644
> --- a/drivers/clk/clk-uclass.c
> +++ b/drivers/clk/clk-uclass.c
> @@ -544,6 +544,19 @@ ulong clk_round_rate(struct clk *clk, ulong rate)
> return ops->round_rate(clk, rate);
> }
>
> +static void clk_get_priv(struct clk *clk, struct clk **clkp)
> +{
> + *clkp = clk;
> +
> + /* get private clock struct associated to the provided clock */
> + if (CONFIG_IS_ENABLED(CLK_CCF)) {
> + /* Take id 0 as a non-valid clk, such as dummy */
> + if (clk->id)
> + clk_get_by_id(clk->id, clkp);
> + }
> +}
> +
> +/* clean cache, called with private clock struct */
> static void clk_clean_rate_cache(struct clk *clk)
> {
> struct udevice *child_dev;
> @@ -563,6 +576,7 @@ static void clk_clean_rate_cache(struct clk *clk)
> ulong clk_set_rate(struct clk *clk, ulong rate)
> {
> const struct clk_ops *ops;
> + struct clk *clkp;
>
> debug("%s(clk=%p, rate=%lu)\n", __func__, clk, rate);
> if (!clk_valid(clk))
> @@ -572,8 +586,10 @@ ulong clk_set_rate(struct clk *clk, ulong rate)
> if (!ops->set_rate)
> return -ENOSYS;
>
> + /* get private clock struct used for cache */
> + clk_get_priv(clk, &clkp);
> /* Clean up cached rates for us and all child clocks */
> - clk_clean_rate_cache(clk);
> + clk_clean_rate_cache(clkp);
>
> return ops->set_rate(clk, rate);
> }
>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2022-08-13 4:11 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-07-12 12:24 [RESEND PATCH v2] clk: update clk_clean_rate_cache to use private clk struct Patrick Delaunay
2022-08-13 4:11 ` Sean Anderson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox