[U-Boot] [PATCH v2] arm: omap: Unify get_device_type() function

[Lokesh Vutla <lokeshvutla@ti.com>]

On Monday 05 June 2017 07:16 PM, Tom Rini wrote:
> On Mon, Jun 05, 2017 at 04:00:35PM +0530, Lokesh Vutla wrote:
>>
>>
>> On Friday 02 June 2017 08:30 PM, Sam Protsenko wrote:
>>> Refactor OMAP3/4/5 code so that we have only one get_device_type()
>>> function for all platforms.
>>>
>>> Details:
>>>  - Add ctrl variable for AM33xx and OMAP3 platforms (like it's done for
>>>    OMAP4/5), so we can obtain status register in common way
>>>  - For now ctrl structure for AM33xx/OMAP3 contains only status register
>>>    address
>>>  - Run hw_data_init() in order to assign ctrl to proper structure
>>>  - Remove DEVICE_MASK and DEVICE_GP definitions as they are not used
>>>    (DEVICE_TYPE_MASK and GP_DEVICE are used instead)
>>>  - Guard structs in omap_common.h with #ifndefs, because otherwise
>>>    including omap_common.h in am33xx board files breaks compilation
>>>
>>> Buildman script was run for all OMAP boards. Result output:
>>>     arm: (for 38/616 boards)
>>>         all +352.5
>>>         bss -1.4
>>>         data +3.5
>>>         rodata +300.0
>>>         spl/u-boot-spl:all +284.7
>>>         spl/u-boot-spl:data +2.2
>>>         spl/u-boot-spl:rodata +252.0
>>>         spl/u-boot-spl:text +30.5
>>>         text +50.4
>>>     (no errors to report)
>>>
>>> Tested on AM57x EVM and BeagleBoard xM.
>>>
>>> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
>>
>> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
>>
>> Will you be able to test on BeagleBoneBlack as well?
> 
> I tested v1 of this on am335x-gp-evm.  I don't have BBB in my automatic

This is fine. I just want to make sure am335x is not broken :)

Thanks and regards,
Lokesh

> lab due to how it's powered, and that I only have 1 of those USB hubs I
> can control power on each port on. :(
>