* scsi on ultra 1 problem
@ 2000-11-28 16:02 Christophe Jauffret
0 siblings, 0 replies; only message in thread
From: Christophe Jauffret @ 2000-11-28 16:02 UTC (permalink / raw)
To: ultralinux
i have a sun ultra1/170E where i want install Linux and all the Kernel
that i boot
cause problem with scsi
i test with 2.2.14-5 (from redhat 6.2), 2.2.17 custom (compiled with
Linux on Ultra5), 2.4-pre11 custom (compiled with the same Ultra5)
scsi controller seems be NCR53C9XF aka espfast
my hard drive was Quantum ATLAS II
and all my kernel say (this log is from 2.2.17):
esp0: IRQ 3,7e0 SCSI ID 7 Clk 40MHz CCF=8 TOut 167 NCR53C9XF(espfast)
ESP: Total of 1 ESP hosts found, 1 actually in use.
scsi0 : Sparc ESP366-HME
scsi : 1 host.
esp0: target 1 [period 100ns offset 15 20.00MHz FAST-WIDE SCSI-II]
esp0: data bad parity detected.
esp0: yieee, bytes_sent < 0!
esp0: csz=0 fifocount=0 ecounte520
esp0: use_sg=0 ptr\000000013006b88 this_residual=0
esp0: Forcing async for target 1
scsi0 : channel 0 target 1 lun 0 request sense failed, performing reset.
SCSI bus is being reset for host 0 channel 0.
esp0: Resetting scsi bus
esp0: SCSI bus reset interrupt
esp0: target 1 [period 100ns offset 15 20.00MHz FAST-WIDE SCSI-II]
esp0: data bad parity detected.
esp0: data bad parity detected.
esp0: yieee, bytes_sent < 0!
esp0: csz=0 fifocount=0 ecounte520
esp0: use_sg=0 ptr\000000013006b88 this_residual=0
esp0: Forcing async for target 1
scsi0 : channel 0 target 1 lun 0 request sense failed, performing reset.
SCSI bus is being reset for host 0 channel 0.
esp0: Resetting scsi bus
esp0: SCSI bus reset interrupt
esp0: target 1 [period 100ns offset 15 20.00MHz FAST-WIDE SCSI-II]
esp0: data bad parity detected.
esp0: data bad parity detected.
esp0: data bad parity detected.
scsi : aborting command due to timeout : pid 7, scsi0, channel 0, id 6,
lun 0 R
esp0: Aborting command
esp0: dumping state
esp0: dma -- cond_reg<b2bf8b14> addr<13006b78>
esp0: SW [sreg<11> sstep<04> ireg<18>]
----------------------------------------------------------
end of log
----------------------------------------------------------
we see the "data bad parity detected" like some other people on this
mailinglist
but no response found
all idea are welcome
-
To unsubscribe from this list: send the line "unsubscribe ultralinux" in
the body of a message to majordomo@vger.kernel.org
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2000-11-28 16:02 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2000-11-28 16:02 scsi on ultra 1 problem Christophe Jauffret
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox