From: Dmitri Katchalov <dmitrik@users.sourceforge.net>
To: Pat LaVarre <p.lavarre@ieee.org>
Cc: "usb-storage@one-eyed-alien.net" <usb-storage@one-eyed-alien.net>,
"linux-scsi@vger.kernel.org" <linux-scsi@vger.kernel.org>,
"mdharm-scsi@one-eyed-alien.net" <mdharm-scsi@one-eyed-alien.net>,
"stern@rowland.harvard.edu" <stern@rowland.harvard.edu>,
"patmans@us.ibm.co" <patmans@us.ibm.co>,
"james.bottomley@steeleye.com" <james.bottomley@steeleye.com>,
"ronald@kuetemeier.com" <ronald@kuetemeier.com>,
"idan@idanso.dyndns.org" <idan@idanso.dyndns.org>
Subject: Re: [usb-storage] mode sense blacklist how
Date: Wed, 19 Nov 2003 23:55:02 +1100 [thread overview]
Message-ID: <1069246502.3fbb6826955dd@webmail.netregistry.net> (raw)
In-Reply-To: <1068838908.2852.34.camel@patrh9>
[-- Attachment #1: Type: text/plain, Size: 1038 bytes --]
Quoting Pat LaVarre <p.lavarre@ieee.org>:
> Step-by-step instructions follow, in case you choose to try them.
I understand that you guys must be sick and tired of those
memory sticks by now. Just in case you're still interested
here is my report:
Long version:
See attached kern.log
Short version:
MODE SENSE (6): device reports STALL condition. Subsequent
auto-REQUEST SENSE reports "Illegal Request in CDB".
As far as I undertand the device tries to tell us that the
command is not supported.
MODE SENSE (10): plscsi hangs and sits there in
usb_stor_bulk_transfer_buf until the device is
physically unplugged. kill -9 has no effect.
Another interesting "feature": the camera does not work
as a USB device without memory stick in its slot. That is
if I plug it in without the stick nothing happens. When I
then insert the stick it goes through the normal port
status change/discovery/enumeration routine. When I
remove the stick from its slot the device pretends it
has been disconnected.
Regards,
Dmitri
[-- Attachment #2: kern.log.usb --]
[-- Type: application/octet-stream, Size: 54802 bytes --]
<turning the camera on>
Nov 20 07:51:40 box kernel: ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
Nov 20 07:51:40 box kernel: hub 5-0:1.0: port 3, status 0, change 1, 12 Mb/s
Nov 20 07:51:40 box kernel: ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
Nov 20 07:51:40 box kernel: hub 5-0:1.0: port 4, status 100, change 1, 12 Mb/s
Nov 20 07:51:44 box kernel: ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
Nov 20 07:51:44 box kernel: hub 5-0:1.0: port 3, status 0, change 1, 12 Mb/s
Nov 20 07:51:44 box kernel: ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT
Nov 20 07:51:44 box kernel: hub 5-0:1.0: port 4, status 501, change 1, 480 Mb/s
Nov 20 07:51:44 box kernel: hub 5-0:1.0: debounce: port 4: delay 100ms stable 4 status 0x501
Nov 20 07:51:44 box kernel: ehci_hcd 0000:00:1d.7: port 4 full speed --> companion
Nov 20 07:51:44 box kernel: ehci_hcd 0000:00:1d.7: GetStatus port 4 status 003801 POWER OWNER sig=j CONNECT
Nov 20 07:51:44 box kernel: hub 2-0:1.0: port 2, status 101, change 1, 12 Mb/s
Nov 20 07:51:44 box kernel: hub 2-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x101
Nov 20 07:51:44 box kernel: hub 2-0:1.0: new USB device on port 2, assigned address 4
Nov 20 07:51:44 box kernel: usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
Nov 20 07:51:44 box kernel: drivers/usb/core/message.c: USB device number 4 default language ID 0x409
Nov 20 07:51:44 box kernel: usb 2-2: Product: Sony Handycam
Nov 20 07:51:44 box kernel: usb 2-2: Manufacturer: Sony
Nov 20 07:51:44 box kernel: drivers/usb/core/usb.c: usb_hotplug
Nov 20 07:51:44 box kernel: usb 2-2: registering 2-2:1.0 (config #1, interface 0)
Nov 20 07:51:44 box kernel: drivers/usb/core/usb.c: usb_hotplug
Nov 20 07:51:44 box kernel: Initializing USB Mass Storage driver...
Nov 20 07:51:44 box kernel: usb-storage 2-2:1.0: usb_probe_interface
Nov 20 07:51:44 box kernel: usb-storage 2-2:1.0: usb_probe_interface - got id
Nov 20 07:51:44 box kernel: usb-storage: USB Mass Storage device detected
Nov 20 07:51:44 box kernel: usb-storage: act_altsetting is 0, id_index is 26
Nov 20 07:51:44 box kernel: usb-storage: -- associate_dev
Nov 20 07:51:44 box kernel: usb-storage: Vendor: Sony
Nov 20 07:51:44 box kernel: usb-storage: Product: Handycam
Nov 20 07:51:44 box kernel: usb-storage: Transport: Control/Bulk
Nov 20 07:51:44 box kernel: usb-storage: Protocol: Transparent SCSI
Nov 20 07:51:44 box kernel: usb-storage: Endpoints: In: 0xe5c6cf58 Out: 0xe5c6cf44 Int: 0xe5c6cf6c (Period 255)
Nov 20 07:51:44 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:51:44 box kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Nov 20 07:51:44 box kernel: usb-storage: queuecommand called
Nov 20 07:51:44 box kernel: usb-storage: *** thread awakened.
Nov 20 07:51:44 box kernel: usb-storage: Command INQUIRY (6 bytes)
Nov 20 07:51:44 box kernel: usb-storage: 12 00 00 00 24 00
Nov 20 07:51:44 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:51:44 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:51:44 box kernel: usb-storage: -- transfer complete
Nov 20 07:51:44 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:51:44 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
Nov 20 07:51:44 box kernel: usb-storage: Status code 0; transferred 36/36
Nov 20 07:51:44 box kernel: usb-storage: -- transfer complete
Nov 20 07:51:44 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 07:51:44 box kernel: usb-storage: -- CB transport device requiring auto-sense
Nov 20 07:51:44 box kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 20 07:51:44 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:51:44 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:51:44 box kernel: usb-storage: -- transfer complete
Nov 20 07:51:44 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:51:44 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Nov 20 07:51:44 box kernel: usb-storage: Status code 0; transferred 18/18
Nov 20 07:51:44 box kernel: usb-storage: -- transfer complete
Nov 20 07:51:44 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 07:51:44 box kernel: usb-storage: -- Result from auto-sense is 0
Nov 20 07:51:44 box kernel: usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0
Nov 20 07:51:44 box kernel: usb-storage: No Sense: No additional sense information
Nov 20 07:51:44 box kernel: usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0
Nov 20 07:51:44 box kernel: usb-storage: scsi cmd done, result=0x0
Nov 20 07:51:44 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:51:44 box kernel: Vendor: Sony Model: Sony DSC Rev: 3.00
Nov 20 07:51:44 box kernel: Type: Direct-Access ANSI SCSI revision: 02
Nov 20 07:51:44 box kernel: usb-storage: queuecommand called
Nov 20 07:51:44 box kernel: usb-storage: *** thread awakened.
Nov 20 07:51:44 box kernel: usb-storage: Bad target number (1:0)
Nov 20 07:51:44 box kernel: usb-storage: scsi cmd done, result=0x40000
Nov 20 07:51:44 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:51:44 box kernel: usb-storage: queuecommand called
Nov 20 07:51:44 box kernel: usb-storage: *** thread awakened.
Nov 20 07:51:44 box kernel: usb-storage: Bad target number (2:0)
Nov 20 07:51:44 box kernel: usb-storage: scsi cmd done, result=0x40000
Nov 20 07:51:44 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:51:44 box kernel: usb-storage: queuecommand called
Nov 20 07:51:44 box kernel: usb-storage: *** thread awakened.
Nov 20 07:51:44 box kernel: usb-storage: Bad target number (3:0)
Nov 20 07:51:44 box kernel: usb-storage: scsi cmd done, result=0x40000
Nov 20 07:51:44 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:51:44 box kernel: usb-storage: queuecommand called
Nov 20 07:51:44 box kernel: usb-storage: *** thread awakened.
Nov 20 07:51:44 box kernel: usb-storage: Bad target number (4:0)
Nov 20 07:51:44 box kernel: usb-storage: scsi cmd done, result=0x40000
Nov 20 07:51:44 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:51:44 box kernel: usb-storage: queuecommand called
Nov 20 07:51:44 box kernel: usb-storage: *** thread awakened.
Nov 20 07:51:44 box kernel: usb-storage: Bad target number (5:0)
Nov 20 07:51:44 box kernel: usb-storage: scsi cmd done, result=0x40000
Nov 20 07:51:44 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:51:44 box kernel: usb-storage: queuecommand called
Nov 20 07:51:44 box kernel: usb-storage: *** thread awakened.
Nov 20 07:51:44 box kernel: usb-storage: Bad target number (6:0)
Nov 20 07:51:44 box kernel: usb-storage: scsi cmd done, result=0x40000
Nov 20 07:51:44 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:51:44 box kernel: usb-storage: queuecommand called
Nov 20 07:51:44 box kernel: usb-storage: *** thread awakened.
Nov 20 07:51:44 box kernel: usb-storage: Bad target number (7:0)
Nov 20 07:51:44 box kernel: usb-storage: scsi cmd done, result=0x40000
Nov 20 07:51:44 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:51:44 box kernel: WARNING: USB Mass Storage data integrity not assured
Nov 20 07:51:44 box kernel: USB Mass Storage device found at 4
Nov 20 07:51:44 box kernel: drivers/usb/core/usb.c: registered new driver usb-storage
Nov 20 07:51:44 box kernel: USB Mass Storage support registered.
Nov 20 07:55:36 box kernel: usb-storage: queuecommand called
Nov 20 07:55:36 box kernel: usb-storage: *** thread awakened.
Nov 20 07:55:36 box kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Nov 20 07:55:36 box kernel: usb-storage: 00 00 00 00 00 00
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:55:36 box kernel: usb-storage: -- CB transport device requiring auto-sense
Nov 20 07:55:36 box kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 18/18
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 07:55:36 box kernel: usb-storage: -- Result from auto-sense is 0
Nov 20 07:55:36 box kernel: usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0
Nov 20 07:55:36 box kernel: usb-storage: No Sense: No additional sense information
Nov 20 07:55:36 box kernel: usb-storage: scsi cmd done, result=0x0
Nov 20 07:55:36 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:55:36 box kernel: usb-storage: queuecommand called
Nov 20 07:55:36 box kernel: usb-storage: *** thread awakened.
Nov 20 07:55:36 box kernel: usb-storage: Command READ_CAPACITY (10 bytes)
Nov 20 07:55:36 box kernel: usb-storage: 25 00 00 00 00 00 00 00 00 00
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=10
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 10/10
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 8/8
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 07:55:36 box kernel: usb-storage: -- CB transport device requiring auto-sense
Nov 20 07:55:36 box kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 18/18
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 07:55:36 box kernel: usb-storage: -- Result from auto-sense is 0
Nov 20 07:55:36 box kernel: usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0
Nov 20 07:55:36 box kernel: usb-storage: No Sense: No additional sense information
Nov 20 07:55:36 box kernel: usb-storage: scsi cmd done, result=0x0
Nov 20 07:55:36 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:55:36 box kernel: SCSI device sda: 7904 512-byte hdwr sectors (4 MB)
Nov 20 07:55:36 box kernel: usb-storage: queuecommand called
Nov 20 07:55:36 box kernel: usb-storage: *** thread awakened.
Nov 20 07:55:36 box kernel: usb-storage: Command MODE_SENSE (6 bytes)
Nov 20 07:55:36 box kernel: usb-storage: 1a 00 3f 00 04 00
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:55:36 box kernel: usb-storage: Status code -32; transferred 6/6
Nov 20 07:55:36 box kernel: usb-storage: -- stall on control pipe
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 2
Nov 20 07:55:36 box kernel: usb-storage: -- CB transport device requiring auto-sense
Nov 20 07:55:36 box kernel: usb-storage: -- transport indicates command failure
Nov 20 07:55:36 box kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 18/18
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 07:55:36 box kernel: usb-storage: -- Result from auto-sense is 0
Nov 20 07:55:36 box kernel: usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
Nov 20 07:55:36 box kernel: usb-storage: Illegal Request: Invalid field in cdb
Nov 20 07:55:36 box kernel: usb-storage: scsi cmd done, result=0x2
Nov 20 07:55:36 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:55:36 box kernel: usb-storage: queuecommand called
Nov 20 07:55:36 box kernel: usb-storage: *** thread awakened.
Nov 20 07:55:36 box kernel: usb-storage: Command MODE_SENSE (6 bytes)
Nov 20 07:55:36 box kernel: usb-storage: 1a 00 00 00 04 00
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:55:36 box kernel: usb-storage: Status code -32; transferred 6/6
Nov 20 07:55:36 box kernel: usb-storage: -- stall on control pipe
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 2
Nov 20 07:55:36 box kernel: usb-storage: -- CB transport device requiring auto-sense
Nov 20 07:55:36 box kernel: usb-storage: -- transport indicates command failure
Nov 20 07:55:36 box kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 18/18
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 07:55:36 box kernel: usb-storage: -- Result from auto-sense is 0
Nov 20 07:55:36 box kernel: usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
Nov 20 07:55:36 box kernel: usb-storage: Illegal Request: Invalid field in cdb
Nov 20 07:55:36 box kernel: usb-storage: scsi cmd done, result=0x2
Nov 20 07:55:36 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:55:36 box kernel: usb-storage: queuecommand called
Nov 20 07:55:36 box kernel: usb-storage: *** thread awakened.
Nov 20 07:55:36 box kernel: usb-storage: Command MODE_SENSE (6 bytes)
Nov 20 07:55:36 box kernel: usb-storage: 1a 00 3f 00 ff 00
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:55:36 box kernel: usb-storage: Status code -32; transferred 6/6
Nov 20 07:55:36 box kernel: usb-storage: -- stall on control pipe
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 2
Nov 20 07:55:36 box kernel: usb-storage: -- CB transport device requiring auto-sense
Nov 20 07:55:36 box kernel: usb-storage: -- transport indicates command failure
Nov 20 07:55:36 box kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 18/18
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 07:55:36 box kernel: usb-storage: -- Result from auto-sense is 0
Nov 20 07:55:36 box kernel: usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
Nov 20 07:55:36 box kernel: usb-storage: Illegal Request: Invalid field in cdb
Nov 20 07:55:36 box kernel: usb-storage: scsi cmd done, result=0x2
Nov 20 07:55:36 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:55:36 box kernel: sda: test WP failed, assume Write Enabled
Nov 20 07:55:36 box kernel: usb-storage: queuecommand called
Nov 20 07:55:36 box kernel: usb-storage: *** thread awakened.
Nov 20 07:55:36 box kernel: usb-storage: Command MODE_SENSE (6 bytes)
Nov 20 07:55:36 box kernel: usb-storage: 1a 00 08 00 04 00
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:55:36 box kernel: usb-storage: Status code -32; transferred 6/6
Nov 20 07:55:36 box kernel: usb-storage: -- stall on control pipe
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 2
Nov 20 07:55:36 box kernel: usb-storage: -- CB transport device requiring auto-sense
Nov 20 07:55:36 box kernel: usb-storage: -- transport indicates command failure
Nov 20 07:55:36 box kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 18/18
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 07:55:36 box kernel: usb-storage: -- Result from auto-sense is 0
Nov 20 07:55:36 box kernel: usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
Nov 20 07:55:36 box kernel: usb-storage: Illegal Request: Invalid field in cdb
Nov 20 07:55:36 box kernel: usb-storage: scsi cmd done, result=0x2
Nov 20 07:55:36 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:55:36 box kernel: sda: cache data unavailable
Nov 20 07:55:36 box kernel: sda: assuming drive cache: write through
Nov 20 07:55:36 box kernel: usb-storage: queuecommand called
Nov 20 07:55:36 box kernel: usb-storage: *** thread awakened.
Nov 20 07:55:36 box kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Nov 20 07:55:36 box kernel: usb-storage: 00 00 00 00 00 00
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:55:36 box kernel: usb-storage: -- CB transport device requiring auto-sense
Nov 20 07:55:36 box kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 18/18
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 07:55:36 box kernel: usb-storage: -- Result from auto-sense is 0
Nov 20 07:55:36 box kernel: usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0
Nov 20 07:55:36 box kernel: usb-storage: No Sense: No additional sense information
Nov 20 07:55:36 box kernel: usb-storage: scsi cmd done, result=0x0
Nov 20 07:55:36 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:55:36 box kernel: usb-storage: queuecommand called
Nov 20 07:55:36 box kernel: usb-storage: *** thread awakened.
Nov 20 07:55:36 box kernel: usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
Nov 20 07:55:36 box kernel: usb-storage: 1e 00 00 00 01 00
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:55:36 box kernel: usb-storage: Status code -32; transferred 6/6
Nov 20 07:55:36 box kernel: usb-storage: -- stall on control pipe
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 2
Nov 20 07:55:36 box kernel: usb-storage: -- CB transport device requiring auto-sense
Nov 20 07:55:36 box kernel: usb-storage: -- transport indicates command failure
Nov 20 07:55:36 box kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 18/18
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 07:55:36 box kernel: usb-storage: -- Result from auto-sense is 0
Nov 20 07:55:36 box kernel: usb-storage: -- code: 0x70, key: 0x5, ASC: 0x20, ASCQ: 0x0
Nov 20 07:55:36 box kernel: usb-storage: Illegal Request: Invalid command operation code
Nov 20 07:55:36 box kernel: usb-storage: scsi cmd done, result=0x2
Nov 20 07:55:36 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:55:36 box kernel: sda:<7>usb-storage: queuecommand called
Nov 20 07:55:36 box kernel: usb-storage: *** thread awakened.
Nov 20 07:55:36 box kernel: usb-storage: Command READ_10 (10 bytes)
Nov 20 07:55:36 box kernel: usb-storage: 28 00 00 00 00 00 00 00 08 00
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=10
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 10/10
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 4096/4096
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 07:55:36 box kernel: usb-storage: -- CB transport device requiring auto-sense
Nov 20 07:55:36 box kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 18/18
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 07:55:36 box kernel: usb-storage: -- Result from auto-sense is 0
Nov 20 07:55:36 box kernel: usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0
Nov 20 07:55:36 box kernel: usb-storage: No Sense: No additional sense information
Nov 20 07:55:36 box kernel: usb-storage: scsi cmd done, result=0x0
Nov 20 07:55:36 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:55:36 box kernel: sda1
Nov 20 07:55:36 box kernel: Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
Nov 20 07:55:36 box kernel: usb-storage: queuecommand called
Nov 20 07:55:36 box kernel: usb-storage: *** thread awakened.
Nov 20 07:55:36 box kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Nov 20 07:55:36 box kernel: usb-storage: 00 00 00 00 00 00
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:55:36 box kernel: usb-storage: -- CB transport device requiring auto-sense
Nov 20 07:55:36 box kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 18/18
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 07:55:36 box kernel: usb-storage: -- Result from auto-sense is 0
Nov 20 07:55:36 box kernel: usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0
Nov 20 07:55:36 box kernel: usb-storage: No Sense: No additional sense information
Nov 20 07:55:36 box kernel: usb-storage: scsi cmd done, result=0x0
Nov 20 07:55:36 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:55:36 box kernel: usb-storage: queuecommand called
Nov 20 07:55:36 box kernel: usb-storage: *** thread awakened.
Nov 20 07:55:36 box kernel: usb-storage: Command MODE_SENSE (6 bytes)
Nov 20 07:55:36 box kernel: usb-storage: 1a 00 1c 00 c0 00
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:55:36 box kernel: usb-storage: Status code -32; transferred 6/6
Nov 20 07:55:36 box kernel: usb-storage: -- stall on control pipe
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 2
Nov 20 07:55:36 box kernel: usb-storage: -- CB transport device requiring auto-sense
Nov 20 07:55:36 box kernel: usb-storage: -- transport indicates command failure
Nov 20 07:55:36 box kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:55:36 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Nov 20 07:55:36 box kernel: usb-storage: Status code 0; transferred 18/18
Nov 20 07:55:36 box kernel: usb-storage: -- transfer complete
Nov 20 07:55:36 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 07:55:36 box kernel: usb-storage: -- Result from auto-sense is 0
Nov 20 07:55:36 box kernel: usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
Nov 20 07:55:36 box kernel: usb-storage: Illegal Request: Invalid field in cdb
Nov 20 07:55:36 box kernel: usb-storage: scsi cmd done, result=0x2
Nov 20 07:55:36 box kernel: usb-storage: *** thread sleeping.
// x 5 24 sense // xC0 (192) residue
// -x0102 = -258 = plscsi,main exit int
./plscsi -i xC0 -x "1A 00:3F:00 C0 00"
Nov 20 07:58:09 box kernel: usb-storage: queuecommand called
Nov 20 07:58:09 box kernel: usb-storage: *** thread awakened.
Nov 20 07:58:09 box kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Nov 20 07:58:09 box kernel: usb-storage: 00 00 00 00 00 00
Nov 20 07:58:09 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:58:09 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:58:09 box kernel: usb-storage: -- transfer complete
Nov 20 07:58:09 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:58:09 box kernel: usb-storage: -- CB transport device requiring auto-sense
Nov 20 07:58:09 box kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 20 07:58:09 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:58:09 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:58:09 box kernel: usb-storage: -- transfer complete
Nov 20 07:58:09 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:58:09 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Nov 20 07:58:09 box kernel: usb-storage: Status code 0; transferred 18/18
Nov 20 07:58:09 box kernel: usb-storage: -- transfer complete
Nov 20 07:58:09 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 07:58:09 box kernel: usb-storage: -- Result from auto-sense is 0
Nov 20 07:58:09 box kernel: usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0
Nov 20 07:58:09 box kernel: usb-storage: No Sense: No additional sense information
Nov 20 07:58:09 box kernel: usb-storage: scsi cmd done, result=0x0
Nov 20 07:58:09 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:58:09 box kernel: usb-storage: queuecommand called
Nov 20 07:58:09 box kernel: usb-storage: *** thread awakened.
Nov 20 07:58:09 box kernel: usb-storage: Command MODE_SENSE (6 bytes)
Nov 20 07:58:09 box kernel: usb-storage: 1a 00 3f 00 c0 00
Nov 20 07:58:09 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:58:09 box kernel: usb-storage: Status code -32; transferred 6/6
Nov 20 07:58:09 box kernel: usb-storage: -- stall on control pipe
Nov 20 07:58:09 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 2
Nov 20 07:58:09 box kernel: usb-storage: -- CB transport device requiring auto-sense
Nov 20 07:58:09 box kernel: usb-storage: -- transport indicates command failure
Nov 20 07:58:09 box kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 20 07:58:09 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:58:09 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:58:09 box kernel: usb-storage: -- transfer complete
Nov 20 07:58:09 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:58:09 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Nov 20 07:58:09 box kernel: usb-storage: Status code 0; transferred 18/18
Nov 20 07:58:09 box kernel: usb-storage: -- transfer complete
Nov 20 07:58:09 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 07:58:09 box kernel: usb-storage: -- Result from auto-sense is 0
Nov 20 07:58:09 box kernel: usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
Nov 20 07:58:09 box kernel: usb-storage: Illegal Request: Invalid field in cdb
Nov 20 07:58:09 box kernel: usb-storage: scsi cmd done, result=0x2
Nov 20 07:58:09 box kernel: usb-storage: *** thread sleeping.
// x 5 24 sense // xC0 (192) residue
// -x0102 = -258 = plscsi,main exit int
./plscsi -i x0C -x "1A 00:00:00 0C 00"
Nov 20 07:59:27 box kernel: usb-storage: queuecommand called
Nov 20 07:59:27 box kernel: usb-storage: *** thread awakened.
Nov 20 07:59:27 box kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Nov 20 07:59:27 box kernel: usb-storage: 00 00 00 00 00 00
Nov 20 07:59:27 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:59:27 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:59:27 box kernel: usb-storage: -- transfer complete
Nov 20 07:59:27 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:59:27 box kernel: usb-storage: -- CB transport device requiring auto-sense
Nov 20 07:59:27 box kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 20 07:59:27 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:59:27 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:59:27 box kernel: usb-storage: -- transfer complete
Nov 20 07:59:27 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:59:27 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Nov 20 07:59:27 box kernel: usb-storage: Status code 0; transferred 18/18
Nov 20 07:59:27 box kernel: usb-storage: -- transfer complete
Nov 20 07:59:27 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 07:59:27 box kernel: usb-storage: -- Result from auto-sense is 0
Nov 20 07:59:27 box kernel: usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0
Nov 20 07:59:27 box kernel: usb-storage: No Sense: No additional sense information
Nov 20 07:59:27 box kernel: usb-storage: scsi cmd done, result=0x0
Nov 20 07:59:27 box kernel: usb-storage: *** thread sleeping.
Nov 20 07:59:27 box kernel: usb-storage: queuecommand called
Nov 20 07:59:27 box kernel: usb-storage: *** thread awakened.
Nov 20 07:59:27 box kernel: usb-storage: Command MODE_SENSE (6 bytes)
Nov 20 07:59:27 box kernel: usb-storage: 1a 00 00 00 0c 00
Nov 20 07:59:27 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:59:27 box kernel: usb-storage: Status code -32; transferred 6/6
Nov 20 07:59:27 box kernel: usb-storage: -- stall on control pipe
Nov 20 07:59:27 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 2
Nov 20 07:59:27 box kernel: usb-storage: -- CB transport device requiring auto-sense
Nov 20 07:59:27 box kernel: usb-storage: -- transport indicates command failure
Nov 20 07:59:27 box kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 20 07:59:27 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 07:59:27 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 07:59:27 box kernel: usb-storage: -- transfer complete
Nov 20 07:59:27 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 07:59:27 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Nov 20 07:59:27 box kernel: usb-storage: Status code 0; transferred 18/18
Nov 20 07:59:27 box kernel: usb-storage: -- transfer complete
Nov 20 07:59:27 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 07:59:27 box kernel: usb-storage: -- Result from auto-sense is 0
Nov 20 07:59:27 box kernel: usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
Nov 20 07:59:27 box kernel: usb-storage: Illegal Request: Invalid field in cdb
Nov 20 07:59:27 box kernel: usb-storage: scsi cmd done, result=0x2
Nov 20 07:59:27 box kernel: usb-storage: *** thread sleeping.
// x 5 24 sense // xC (12) residue
// -x0102 = -258 = plscsi,main exit int
./plscsi -i x0C -x "1A 00:3F:00 0C 00"
Nov 20 08:00:25 box kernel: usb-storage: queuecommand called
Nov 20 08:00:25 box kernel: usb-storage: *** thread awakened.
Nov 20 08:00:25 box kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Nov 20 08:00:25 box kernel: usb-storage: 00 00 00 00 00 00
Nov 20 08:00:25 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 08:00:25 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 08:00:25 box kernel: usb-storage: -- transfer complete
Nov 20 08:00:25 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 08:00:25 box kernel: usb-storage: -- CB transport device requiring auto-sense
Nov 20 08:00:25 box kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 20 08:00:25 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 08:00:25 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 08:00:25 box kernel: usb-storage: -- transfer complete
Nov 20 08:00:25 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 08:00:25 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Nov 20 08:00:25 box kernel: usb-storage: Status code 0; transferred 18/18
Nov 20 08:00:25 box kernel: usb-storage: -- transfer complete
Nov 20 08:00:25 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 08:00:25 box kernel: usb-storage: -- Result from auto-sense is 0
Nov 20 08:00:25 box kernel: usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0
Nov 20 08:00:25 box kernel: usb-storage: No Sense: No additional sense information
Nov 20 08:00:25 box kernel: usb-storage: scsi cmd done, result=0x0
Nov 20 08:00:25 box kernel: usb-storage: *** thread sleeping.
Nov 20 08:00:25 box kernel: usb-storage: queuecommand called
Nov 20 08:00:25 box kernel: usb-storage: *** thread awakened.
Nov 20 08:00:25 box kernel: usb-storage: Command MODE_SENSE (6 bytes)
Nov 20 08:00:25 box kernel: usb-storage: 1a 00 3f 00 0c 00
Nov 20 08:00:25 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 08:00:25 box kernel: usb-storage: Status code -32; transferred 6/6
Nov 20 08:00:25 box kernel: usb-storage: -- stall on control pipe
Nov 20 08:00:25 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 2
Nov 20 08:00:25 box kernel: usb-storage: -- CB transport device requiring auto-sense
Nov 20 08:00:25 box kernel: usb-storage: -- transport indicates command failure
Nov 20 08:00:25 box kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 20 08:00:25 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 08:00:25 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 08:00:25 box kernel: usb-storage: -- transfer complete
Nov 20 08:00:25 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 08:00:25 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Nov 20 08:00:25 box kernel: usb-storage: Status code 0; transferred 18/18
Nov 20 08:00:25 box kernel: usb-storage: -- transfer complete
Nov 20 08:00:25 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 08:00:25 box kernel: usb-storage: -- Result from auto-sense is 0
Nov 20 08:00:25 box kernel: usb-storage: -- code: 0x70, key: 0x5, ASC: 0x24, ASCQ: 0x0
Nov 20 08:00:25 box kernel: usb-storage: Illegal Request: Invalid field in cdb
Nov 20 08:00:25 box kernel: usb-storage: scsi cmd done, result=0x2
Nov 20 08:00:25 box kernel: usb-storage: *** thread sleeping.
// x 5 24 sense // xC (12) residue
// -x0102 = -258 = plscsi,main exit int
./plscsi -p -i xC0 -x "5A 00 1C:00:00:00 00 00:C0 00 00:00"
Nov 20 08:03:08 box kernel: usb-storage: queuecommand called
Nov 20 08:03:08 box kernel: usb-storage: *** thread awakened.
Nov 20 08:03:08 box kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Nov 20 08:03:08 box kernel: usb-storage: 00 00 00 00 00 00
Nov 20 08:03:08 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 08:03:08 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 08:03:08 box kernel: usb-storage: -- transfer complete
Nov 20 08:03:08 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 08:03:08 box kernel: usb-storage: -- CB transport device requiring auto-sense
Nov 20 08:03:08 box kernel: usb-storage: Issuing auto-REQUEST_SENSE
Nov 20 08:03:08 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=6
Nov 20 08:03:08 box kernel: usb-storage: Status code 0; transferred 6/6
Nov 20 08:03:08 box kernel: usb-storage: -- transfer complete
Nov 20 08:03:08 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 08:03:08 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
Nov 20 08:03:08 box kernel: usb-storage: Status code 0; transferred 18/18
Nov 20 08:03:08 box kernel: usb-storage: -- transfer complete
Nov 20 08:03:08 box kernel: usb-storage: CB data stage result is 0x0
Nov 20 08:03:08 box kernel: usb-storage: -- Result from auto-sense is 0
Nov 20 08:03:08 box kernel: usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0
Nov 20 08:03:08 box kernel: usb-storage: No Sense: No additional sense information
Nov 20 08:03:08 box kernel: usb-storage: scsi cmd done, result=0x0
Nov 20 08:03:08 box kernel: usb-storage: *** thread sleeping.
Nov 20 08:03:08 box kernel: usb-storage: queuecommand called
Nov 20 08:03:08 box kernel: usb-storage: *** thread awakened.
Nov 20 08:03:08 box kernel: usb-storage: Command MODE_SENSE_10 (10 bytes)
Nov 20 08:03:08 box kernel: usb-storage: 5a 00 1c 00 00 00 00 00 c0 00
Nov 20 08:03:08 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=10
Nov 20 08:03:08 box kernel: usb-storage: Status code 0; transferred 10/10
Nov 20 08:03:08 box kernel: usb-storage: -- transfer complete
Nov 20 08:03:08 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 0
Nov 20 08:03:08 box kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 192 bytes
<plscsi hangs at this point. kill -9 does not work. pulling thew plug now>
Nov 20 08:05:19 box kernel: usb-storage: Status code -71; transferred 0/192
Nov 20 08:05:19 box kernel: usb-storage: -- unknown error
Nov 20 08:05:19 box kernel: usb-storage: CB data stage result is 0x4
Nov 20 08:05:19 box kernel: usb-storage: -- transport indicates error, resetting
Nov 20 08:05:19 box kernel: usb-storage: usb_stor_CB_reset called
Nov 20 08:05:19 box kernel: usb-storage: usb_stor_control_msg: rq=00 rqtype=21 value=0000 index=00 len=12
Nov 20 08:05:19 box kernel: drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000
Nov 20 08:05:19 box kernel: [e5f4b270] link (25f4b1e2) element (25aef540)
Nov 20 08:05:19 box kernel: 0: [e5aef540] link (25aef580) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=37c29020)
Nov 20 08:05:19 box kernel: 1: [e5aef580] link (25aefa00) e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=2522b000)
Nov 20 08:05:19 box kernel: 2: [e5aefa00] link (25aefa40) e3 SPD Active Length=0 MaxLen=3 DT0 EndPt=0 Dev=4, PID=e1(OUT) (buf=2522b008)
Nov 20 08:05:19 box kernel: 3: [e5aefa40] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=69(IN) (buf=00000000)
Nov 20 08:05:19 box kernel:
Nov 20 08:05:19 box kernel: usb-storage: Soft reset failed: -110
Nov 20 08:05:19 box kernel: usb-storage: scsi cmd done, result=0x70000
Nov 20 08:05:19 box kernel: usb-storage: *** thread sleeping.
Nov 20 08:05:19 box kernel: usb-storage: queuecommand called
Nov 20 08:05:19 box kernel: usb-storage: *** thread awakened.
Nov 20 08:05:19 box kernel: usb-storage: Command MODE_SENSE_10 (10 bytes)
Nov 20 08:05:19 box kernel: usb-storage: 5a 00 1c 00 00 00 00 00 c0 00
Nov 20 08:05:19 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=10
Nov 20 08:05:19 box kernel: drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000
Nov 20 08:05:19 box kernel: [e5f4b240] link (25f4b1e2) element (25aef000)
Nov 20 08:05:19 box kernel: 0: [e5aef000] link (25aef140) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=37c29020)
Nov 20 08:05:19 box kernel: 1: [e5aef140] link (25aef180) e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=26152224)
Nov 20 08:05:19 box kernel: 2: [e5aef180] link (25aefa80) e3 SPD Active Length=0 MaxLen=1 DT0 EndPt=0 Dev=4, PID=e1(OUT) (buf=2615222c)
Nov 20 08:05:19 box kernel: 3: [e5aefa80] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=69(IN) (buf=00000000)
Nov 20 08:05:19 box kernel:
Nov 20 08:05:19 box kernel: usb-storage: Status code -110; transferred 0/10
Nov 20 08:05:19 box kernel: usb-storage: -- timeout or NAK
Nov 20 08:05:19 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 4
Nov 20 08:05:19 box kernel: usb-storage: -- transport indicates error, resetting
Nov 20 08:05:19 box kernel: usb-storage: usb_stor_CB_reset called
Nov 20 08:05:19 box kernel: usb-storage: usb_stor_control_msg: rq=00 rqtype=21 value=0000 index=00 len=12
Nov 20 08:05:19 box kernel: drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000
Nov 20 08:05:19 box kernel: [e5f4b270] link (25f4b1e2) element (25aef540)
Nov 20 08:05:19 box kernel: 0: [e5aef540] link (25aef580) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=37c29020)
Nov 20 08:05:19 box kernel: 1: [e5aef580] link (25aefa00) e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=2522b000)
Nov 20 08:05:19 box kernel: 2: [e5aefa00] link (25aefa40) e3 SPD Active Length=0 MaxLen=3 DT0 EndPt=0 Dev=4, PID=e1(OUT) (buf=2522b008)
Nov 20 08:05:19 box kernel: 3: [e5aefa40] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=69(IN) (buf=00000000)
Nov 20 08:05:19 box kernel:
Nov 20 08:05:19 box kernel: usb-storage: Soft reset failed: -110
Nov 20 08:05:19 box kernel: usb-storage: scsi cmd done, result=0x70000
Nov 20 08:05:19 box kernel: usb-storage: *** thread sleeping.
Nov 20 08:05:19 box kernel: usb-storage: queuecommand called
Nov 20 08:05:19 box kernel: usb-storage: *** thread awakened.
Nov 20 08:05:19 box kernel: usb-storage: Command MODE_SENSE_10 (10 bytes)
Nov 20 08:05:19 box kernel: usb-storage: 5a 00 1c 00 00 00 00 00 c0 00
Nov 20 08:05:19 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=10
Nov 20 08:05:19 box kernel: drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000
Nov 20 08:05:19 box kernel: [e5f4b240] link (25f4b1e2) element (25aef000)
Nov 20 08:05:19 box kernel: 0: [e5aef000] link (25aef140) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=37c29020)
Nov 20 08:05:19 box kernel: 1: [e5aef140] link (25aef180) e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=26152224)
Nov 20 08:05:19 box kernel: 2: [e5aef180] link (25aefa80) e3 SPD Active Length=0 MaxLen=1 DT0 EndPt=0 Dev=4, PID=e1(OUT) (buf=2615222c)
Nov 20 08:05:19 box kernel: 3: [e5aefa80] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=69(IN) (buf=00000000)
Nov 20 08:05:19 box kernel:
Nov 20 08:05:19 box kernel: usb-storage: Status code -110; transferred 0/10
Nov 20 08:05:19 box kernel: usb-storage: -- timeout or NAK
Nov 20 08:05:19 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 4
Nov 20 08:05:19 box kernel: usb-storage: -- transport indicates error, resetting
Nov 20 08:05:19 box kernel: usb-storage: usb_stor_CB_reset called
Nov 20 08:05:19 box kernel: usb-storage: usb_stor_control_msg: rq=00 rqtype=21 value=0000 index=00 len=12
Nov 20 08:05:19 box kernel: drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000
Nov 20 08:05:19 box kernel: [e5f4b270] link (25f4b1e2) element (25aef540)
Nov 20 08:05:19 box kernel: 0: [e5aef540] link (25aef580) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=37c29020)
Nov 20 08:05:19 box kernel: 1: [e5aef580] link (25aefa00) e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=2522b000)
Nov 20 08:05:19 box kernel: 2: [e5aefa00] link (25aefa40) e3 SPD Active Length=0 MaxLen=3 DT0 EndPt=0 Dev=4, PID=e1(OUT) (buf=2522b008)
Nov 20 08:05:19 box kernel: 3: [e5aefa40] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=69(IN) (buf=00000000)
Nov 20 08:05:19 box kernel:
Nov 20 08:05:19 box kernel: usb-storage: Soft reset failed: -110
Nov 20 08:05:19 box kernel: usb-storage: scsi cmd done, result=0x70000
Nov 20 08:05:19 box kernel: usb-storage: *** thread sleeping.
Nov 20 08:05:19 box kernel: usb-storage: queuecommand called
Nov 20 08:05:19 box kernel: usb-storage: *** thread awakened.
Nov 20 08:05:19 box kernel: usb-storage: Command MODE_SENSE_10 (10 bytes)
Nov 20 08:05:19 box kernel: usb-storage: 5a 00 1c 00 00 00 00 00 c0 00
Nov 20 08:05:19 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=10
Nov 20 08:05:19 box kernel: drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000
Nov 20 08:05:19 box kernel: [e5f4b240] link (25f4b1e2) element (25aef000)
Nov 20 08:05:19 box kernel: 0: [e5aef000] link (25aef140) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=37c29020)
Nov 20 08:05:19 box kernel: 1: [e5aef140] link (25aef180) e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=26152224)
Nov 20 08:05:19 box kernel: 2: [e5aef180] link (25aefa80) e3 SPD Active Length=0 MaxLen=1 DT0 EndPt=0 Dev=4, PID=e1(OUT) (buf=2615222c)
Nov 20 08:05:19 box kernel: 3: [e5aefa80] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=69(IN) (buf=00000000)
Nov 20 08:05:19 box kernel:
Nov 20 08:05:19 box kernel: usb-storage: Status code -110; transferred 0/10
Nov 20 08:05:19 box kernel: usb-storage: -- timeout or NAK
Nov 20 08:05:19 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 4
Nov 20 08:05:19 box kernel: usb-storage: -- transport indicates error, resetting
Nov 20 08:05:19 box kernel: usb-storage: usb_stor_CB_reset called
Nov 20 08:05:19 box kernel: usb-storage: usb_stor_control_msg: rq=00 rqtype=21 value=0000 index=00 len=12
Nov 20 08:05:19 box kernel: drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000
Nov 20 08:05:19 box kernel: [e5f4b270] link (25f4b1e2) element (25aef540)
Nov 20 08:05:19 box kernel: 0: [e5aef540] link (25aef580) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=37c29020)
Nov 20 08:05:19 box kernel: 1: [e5aef580] link (25aefa00) e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=2522b000)
Nov 20 08:05:19 box kernel: 2: [e5aefa00] link (25aefa40) e3 SPD Active Length=0 MaxLen=3 DT0 EndPt=0 Dev=4, PID=e1(OUT) (buf=2522b008)
Nov 20 08:05:19 box kernel: 3: [e5aefa40] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=69(IN) (buf=00000000)
Nov 20 08:05:19 box kernel:
Nov 20 08:05:19 box kernel: usb-storage: Soft reset failed: -110
Nov 20 08:05:19 box kernel: usb-storage: scsi cmd done, result=0x70000
Nov 20 08:05:19 box kernel: usb-storage: *** thread sleeping.
Nov 20 08:05:19 box kernel: usb-storage: queuecommand called
Nov 20 08:05:19 box kernel: usb-storage: *** thread awakened.
Nov 20 08:05:19 box kernel: usb-storage: Command MODE_SENSE_10 (10 bytes)
Nov 20 08:05:19 box kernel: usb-storage: 5a 00 1c 00 00 00 00 00 c0 00
Nov 20 08:05:19 box kernel: usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=10
Nov 20 08:05:19 box kernel: drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000
Nov 20 08:05:19 box kernel: [e5f4b240] link (25f4b1e2) element (25aef000)
Nov 20 08:05:19 box kernel: 0: [e5aef000] link (25aef140) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=37c29020)
Nov 20 08:05:19 box kernel: 1: [e5aef140] link (25aef180) e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=26152224)
Nov 20 08:05:19 box kernel: 2: [e5aef180] link (25aefa80) e3 SPD Active Length=0 MaxLen=1 DT0 EndPt=0 Dev=4, PID=e1(OUT) (buf=2615222c)
Nov 20 08:05:19 box kernel: 3: [e5aefa80] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=69(IN) (buf=00000000)
Nov 20 08:05:19 box kernel:
Nov 20 08:05:19 box kernel: usb-storage: Status code -110; transferred 0/10
Nov 20 08:05:19 box kernel: usb-storage: -- timeout or NAK
Nov 20 08:05:19 box kernel: usb-storage: Call to usb_stor_ctrl_transfer() returned 4
Nov 20 08:05:19 box kernel: usb-storage: -- transport indicates error, resetting
Nov 20 08:05:19 box kernel: usb-storage: usb_stor_CB_reset called
Nov 20 08:05:19 box kernel: usb-storage: usb_stor_control_msg: rq=00 rqtype=21 value=0000 index=00 len=12
Nov 20 08:05:19 box kernel: drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 440000
Nov 20 08:05:19 box kernel: [e5f4b270] link (25f4b1e2) element (25aef540)
Nov 20 08:05:19 box kernel: 0: [e5aef540] link (25aef580) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=4, PID=2d(SETUP) (buf=37c29020)
Nov 20 08:05:19 box kernel: 1: [e5aef580] link (25aefa00) e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=4, PID=e1(OUT) (buf=2522b000)
Nov 20 08:05:19 box kernel: 2: [e5aefa00] link (25aefa40) e3 SPD Active Length=0 MaxLen=3 DT0 EndPt=0 Dev=4, PID=e1(OUT) (buf=2522b008)
Nov 20 08:05:19 box kernel: 3: [e5aefa40] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=4, PID=69(IN) (buf=00000000)
Nov 20 08:05:19 box kernel:
Nov 20 08:05:19 box kernel: usb-storage: Soft reset failed: -110
Nov 20 08:05:19 box kernel: usb-storage: scsi cmd done, result=0x70000
Nov 20 08:05:19 box kernel: usb-storage: *** thread sleeping.
Nov 20 08:05:19 box kernel: hub 2-0:1.0: port 2, status 100, change 3, 12 Mb/s
Nov 20 08:05:19 box kernel: usb 2-2: USB disconnect, address 4
Nov 20 08:05:19 box kernel: usb 2-2: usb_disable_device nuking all URBs
Nov 20 08:05:19 box kernel: usb 2-2: unregistering interface 2-2:1.0
Nov 20 08:05:19 box kernel: usb-storage: storage_disconnect() called
Nov 20 08:05:19 box kernel: usb-storage: usb_stor_stop_transport called
Nov 20 08:05:19 box kernel: usb-storage: -- dissociate_dev
Nov 20 08:05:19 box kernel: usb-storage: -- sending exit command to thread
Nov 20 08:05:20 box kernel: usb-storage: *** thread awakened.
Nov 20 08:05:20 box kernel: usb-storage: -- exit command received
Nov 20 08:05:20 box kernel: usb-storage: -- usb_stor_release_resources finished
Nov 20 08:05:20 box kernel: drivers/usb/core/usb.c: usb_hotplug
Nov 20 08:05:20 box kernel: usb 2-2: unregistering device
Nov 20 08:05:20 box kernel: drivers/usb/core/usb.c: usb_hotplug
Nov 20 08:05:20 box kernel: ehci_hcd 0000:00:1d.7: GetStatus port 3 status 003002 POWER OWNER sig=se0 CSC
Nov 20 08:05:20 box kernel: hub 5-0:1.0: port 3, status 0, change 1, 12 Mb/s
Nov 20 08:05:20 box kernel: ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC
Nov 20 08:05:20 box kernel: hub 5-0:1.0: port 4, status 100, change 1, 12 Mb/s
Nov 20 08:05:20 box kernel: hub 2-0:1.0: port 2 enable change, status 100
// 192 = xC0 = plscsi.main exit int
< similar results with other MODE SENSE (10) commands >
next prev parent reply other threads:[~2003-11-19 12:55 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-12 23:50 [PATCH] fix Sony USB mass storage - pass larger receive buffer Patrick Mansfield
2003-11-13 0:09 ` Matthew Dharm
2003-11-13 0:13 ` Patrick Mansfield
2003-11-13 0:44 ` Patrick Mansfield
2003-11-13 1:56 ` Matthew Dharm
2003-11-13 14:54 ` [usb-storage] " Alan Stern
2003-11-13 16:21 ` Pat LaVarre
2003-11-13 17:09 ` Alan Stern
2003-11-13 17:24 ` Pat LaVarre
2003-11-13 18:04 ` Patrick Mansfield
2003-11-13 18:15 ` Pat LaVarre
2003-11-13 18:22 ` Pat LaVarre
2003-11-13 18:26 ` Pat LaVarre
2003-11-13 18:37 ` Pat LaVarre
2003-11-13 19:13 ` Matthew Dharm
2003-11-13 19:30 ` Pat LaVarre
2003-11-13 22:03 ` Alan Stern
2003-11-13 23:40 ` Pat LaVarre
2003-11-13 23:51 ` Dmitri Katchalov
2003-11-14 0:16 ` Pat LaVarre
2003-11-14 1:04 ` Matthew Dharm
2003-11-14 1:10 ` Pat LaVarre
2003-11-14 1:13 ` Matthew Dharm
2003-11-13 22:01 ` Alan Stern
2003-11-13 23:37 ` Pat LaVarre
2003-11-14 0:24 ` Patrick Mansfield
2003-11-14 1:54 ` Pat LaVarre
2003-11-14 2:08 ` Matthew Dharm
2003-11-14 2:24 ` Pat LaVarre
2003-11-17 21:38 ` Pat LaVarre
2003-11-17 22:00 ` Patrick Mansfield
2003-11-17 23:36 ` Pat LaVarre
2003-11-14 1:03 ` Matthew Dharm
2003-11-13 23:44 ` Pat LaVarre
2003-11-14 0:13 ` Dmitri Katchalov
2003-11-14 0:55 ` Pat LaVarre
2003-11-14 1:13 ` Matthew Dharm
2003-11-14 2:02 ` Pat LaVarre
2003-11-14 2:10 ` Pat LaVarre
2003-11-14 2:19 ` Matthew Dharm
2003-11-14 2:38 ` [usb-storage] mode sense blacklist how Pat LaVarre
2003-11-14 2:44 ` Matthew Dharm
2003-11-14 17:27 ` Pat LaVarre
2003-11-14 17:57 ` Pat LaVarre
2003-11-14 3:11 ` Dmitri Katchalov
2003-11-14 19:41 ` Pat LaVarre
[not found] ` <20031114153607.A7207@beaverton.ibm.com>
[not found] ` <20031116121039.A13224@beaverton.ibm.com>
2003-11-17 20:14 ` Pat LaVarre
2003-11-19 12:55 ` Dmitri Katchalov [this message]
2003-11-19 16:34 ` Pat LaVarre
2003-11-19 17:02 ` Pat LaVarre
2003-11-19 23:34 ` Douglas Gilbert
2003-11-20 16:32 ` Pat LaVarre
2003-11-21 1:17 ` SG_IO ioctl (was: mode sense blacklist how) Douglas Gilbert
2003-11-21 3:18 ` Willem Riede
2003-11-21 20:51 ` Pat LaVarre
2003-11-28 17:07 ` Pat LaVarre
2003-11-28 17:14 ` Pat LaVarre
2003-11-28 17:31 ` Pat LaVarre
2003-11-28 17:09 ` Pat LaVarre
2003-11-21 21:29 ` Pat LaVarre
2003-11-20 14:06 ` [usb-storage] mode sense blacklist how Dmitri Katchalov
2003-11-20 15:57 ` Pat LaVarre
2003-11-14 1:06 ` [usb-storage] Re: [PATCH] fix Sony USB mass storage - pass larger receive buffer Matthew Dharm
2003-11-14 16:14 ` Alan Stern
2003-11-14 17:29 ` Matthew Dharm
2003-11-14 17:50 ` Pat LaVarre
2003-11-14 2:02 ` Douglas Gilbert
2003-11-14 21:45 ` [usb-storage] " Pat LaVarre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1069246502.3fbb6826955dd@webmail.netregistry.net \
--to=dmitrik@users.sourceforge.net \
--cc=idan@idanso.dyndns.org \
--cc=james.bottomley@steeleye.com \
--cc=linux-scsi@vger.kernel.org \
--cc=mdharm-scsi@one-eyed-alien.net \
--cc=p.lavarre@ieee.org \
--cc=patmans@us.ibm.co \
--cc=ronald@kuetemeier.com \
--cc=stern@rowland.harvard.edu \
--cc=usb-storage@one-eyed-alien.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.