From: Tejun Heo <tj@kernel.org>
To: mingo@elte.hu, linux-kernel@vger.kernel.org, brgerst@gmail.com
Cc: Tejun Heo <tj@kernel.org>
Subject: [PATCH 07/12] x86-64: Move kernelstack from PDA to per-cpu.
Date: Mon, 19 Jan 2009 01:39:14 +0900 [thread overview]
Message-ID: <1232296759-2253-8-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1232296759-2253-1-git-send-email-tj@kernel.org>
From: Brian Gerst <brgerst@gmail.com>
Also clean up PER_CPU_VAR usage in xen-asm_64.S
tj: * remove now unused stack_thread_info()
* s/kernelstack/kernel_stack/
* added FIXME comment in xen-asm_64.S
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
arch/x86/ia32/ia32entry.S | 8 ++++----
arch/x86/include/asm/pda.h | 4 +---
arch/x86/include/asm/thread_info.h | 20 ++++++++------------
arch/x86/kernel/asm-offsets_64.c | 1 -
arch/x86/kernel/cpu/common.c | 6 ++++--
arch/x86/kernel/entry_64.S | 4 ++--
arch/x86/kernel/process_64.c | 4 ++--
arch/x86/kernel/smpboot.c | 3 +++
arch/x86/xen/xen-asm_64.S | 23 +++++++++++------------
9 files changed, 35 insertions(+), 38 deletions(-)
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 256b00b..9c79b24 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -112,8 +112,8 @@ ENTRY(ia32_sysenter_target)
CFI_DEF_CFA rsp,0
CFI_REGISTER rsp,rbp
SWAPGS_UNSAFE_STACK
- movq %gs:pda_kernelstack, %rsp
- addq $(PDA_STACKOFFSET),%rsp
+ movq PER_CPU_VAR(kernel_stack), %rsp
+ addq $(KERNEL_STACK_OFFSET),%rsp
/*
* No need to follow this irqs on/off section: the syscall
* disabled irqs, here we enable it straight after entry:
@@ -273,13 +273,13 @@ ENDPROC(ia32_sysenter_target)
ENTRY(ia32_cstar_target)
CFI_STARTPROC32 simple
CFI_SIGNAL_FRAME
- CFI_DEF_CFA rsp,PDA_STACKOFFSET
+ CFI_DEF_CFA rsp,KERNEL_STACK_OFFSET
CFI_REGISTER rip,rcx
/*CFI_REGISTER rflags,r11*/
SWAPGS_UNSAFE_STACK
movl %esp,%r8d
CFI_REGISTER rsp,r8
- movq %gs:pda_kernelstack,%rsp
+ movq PER_CPU_VAR(kernel_stack),%rsp
/*
* No need to follow this irqs on/off section: the syscall
* disabled irqs and here we enable it straight after entry:
diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h
index 7209302..4d28ffb 100644
--- a/arch/x86/include/asm/pda.h
+++ b/arch/x86/include/asm/pda.h
@@ -13,7 +13,7 @@
struct x8664_pda {
unsigned long unused1;
unsigned long unused2;
- unsigned long kernelstack; /* 16 top of kernel stack for current */
+ unsigned long unused3;
unsigned long oldrsp; /* 24 user rsp for system call */
int irqcount; /* 32 Irq nesting counter. Starts -1 */
unsigned int unused6; /* 36 was cpunumber */
@@ -44,6 +44,4 @@ extern void pda_init(int);
#endif
-#define PDA_STACKOFFSET (5*8)
-
#endif /* _ASM_X86_PDA_H */
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index 9878964..b46f8ca 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -194,25 +194,21 @@ static inline struct thread_info *current_thread_info(void)
#else /* X86_32 */
-#include <asm/pda.h>
+#include <asm/percpu.h>
+#define KERNEL_STACK_OFFSET (5*8)
/*
* macros/functions for gaining access to the thread information structure
* preempt_count needs to be 1 initially, until the scheduler is functional.
*/
#ifndef __ASSEMBLY__
-static inline struct thread_info *current_thread_info(void)
-{
- struct thread_info *ti;
- ti = (void *)(read_pda(kernelstack) + PDA_STACKOFFSET - THREAD_SIZE);
- return ti;
-}
+DECLARE_PER_CPU(unsigned long, kernel_stack);
-/* do not use in interrupt context */
-static inline struct thread_info *stack_thread_info(void)
+static inline struct thread_info *current_thread_info(void)
{
struct thread_info *ti;
- asm("andq %%rsp,%0; " : "=r" (ti) : "0" (~(THREAD_SIZE - 1)));
+ ti = (void *)(percpu_read(kernel_stack) +
+ KERNEL_STACK_OFFSET - THREAD_SIZE);
return ti;
}
@@ -220,8 +216,8 @@ static inline struct thread_info *stack_thread_info(void)
/* how to get the thread information struct from ASM */
#define GET_THREAD_INFO(reg) \
- movq %gs:pda_kernelstack,reg ; \
- subq $(THREAD_SIZE-PDA_STACKOFFSET),reg
+ movq PER_CPU_VAR(kernel_stack),reg ; \
+ subq $(THREAD_SIZE-KERNEL_STACK_OFFSET),reg
#endif
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index 4f7a210..cafff5f 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -49,7 +49,6 @@ int main(void)
BLANK();
#undef ENTRY
#define ENTRY(entry) DEFINE(pda_ ## entry, offsetof(struct x8664_pda, entry))
- ENTRY(kernelstack);
ENTRY(oldrsp);
ENTRY(irqcount);
DEFINE(pda_size, sizeof(struct x8664_pda));
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index b50e38d..06b6290 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -889,6 +889,10 @@ DEFINE_PER_CPU(char *, irq_stack_ptr) =
per_cpu_var(irq_stack) + IRQ_STACK_SIZE - 64;
#endif
+DEFINE_PER_CPU(unsigned long, kernel_stack) =
+ (unsigned long)&init_thread_union - KERNEL_STACK_OFFSET + THREAD_SIZE;
+EXPORT_PER_CPU_SYMBOL(kernel_stack);
+
void __cpuinit pda_init(int cpu)
{
struct x8664_pda *pda = cpu_pda(cpu);
@@ -900,8 +904,6 @@ void __cpuinit pda_init(int cpu)
load_pda_offset(cpu);
pda->irqcount = -1;
- pda->kernelstack = (unsigned long)stack_thread_info() -
- PDA_STACKOFFSET + THREAD_SIZE;
if (cpu != 0) {
if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index d22677a..0dd4585 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -468,7 +468,7 @@ END(ret_from_fork)
ENTRY(system_call)
CFI_STARTPROC simple
CFI_SIGNAL_FRAME
- CFI_DEF_CFA rsp,PDA_STACKOFFSET
+ CFI_DEF_CFA rsp,KERNEL_STACK_OFFSET
CFI_REGISTER rip,rcx
/*CFI_REGISTER rflags,r11*/
SWAPGS_UNSAFE_STACK
@@ -480,7 +480,7 @@ ENTRY(system_call)
ENTRY(system_call_after_swapgs)
movq %rsp,%gs:pda_oldrsp
- movq %gs:pda_kernelstack,%rsp
+ movq PER_CPU_VAR(kernel_stack),%rsp
/*
* No need to follow this irqs off/on section - it's straight
* and short:
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index e00c31a..6c5f576 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -620,9 +620,9 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
write_pda(oldrsp, next->usersp);
percpu_write(current_task, next_p);
- write_pda(kernelstack,
+ percpu_write(kernel_stack,
(unsigned long)task_stack_page(next_p) +
- THREAD_SIZE - PDA_STACKOFFSET);
+ THREAD_SIZE - KERNEL_STACK_OFFSET);
#ifdef CONFIG_CC_STACKPROTECTOR
write_pda(stack_canary, next_p->stack_canary);
/*
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 5854be0..869b988 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -798,6 +798,9 @@ do_rest:
#else
clear_tsk_thread_flag(c_idle.idle, TIF_FORK);
initial_gs = per_cpu_offset(cpu);
+ per_cpu(kernel_stack, cpu) =
+ (unsigned long)task_stack_page(c_idle.idle) -
+ KERNEL_STACK_OFFSET + THREAD_SIZE;
#endif
early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
initial_code = (unsigned long)start_secondary;
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
index 05794c5..5a23e89 100644
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -17,6 +17,7 @@
#include <asm/processor-flags.h>
#include <asm/errno.h>
#include <asm/segment.h>
+#include <asm/percpu.h>
#include <xen/interface/xen.h>
@@ -28,12 +29,10 @@
#if 1
/*
- x86-64 does not yet support direct access to percpu variables
- via a segment override, so we just need to make sure this code
- never gets used
+ FIXME: x86_64 now can support direct access to percpu variables
+ via a segment override. Update xen accordingly.
*/
#define BUG ud2a
-#define PER_CPU_VAR(var, off) 0xdeadbeef
#endif
/*
@@ -45,14 +44,14 @@ ENTRY(xen_irq_enable_direct)
BUG
/* Unmask events */
- movb $0, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+ movb $0, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
/* Preempt here doesn't matter because that will deal with
any pending interrupts. The pending check may end up being
run on the wrong CPU, but that doesn't hurt. */
/* Test for pending */
- testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_pending)
+ testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
jz 1f
2: call check_events
@@ -69,7 +68,7 @@ ENDPATCH(xen_irq_enable_direct)
ENTRY(xen_irq_disable_direct)
BUG
- movb $1, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+ movb $1, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
ENDPATCH(xen_irq_disable_direct)
ret
ENDPROC(xen_irq_disable_direct)
@@ -87,7 +86,7 @@ ENDPATCH(xen_irq_disable_direct)
ENTRY(xen_save_fl_direct)
BUG
- testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+ testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
setz %ah
addb %ah,%ah
ENDPATCH(xen_save_fl_direct)
@@ -107,13 +106,13 @@ ENTRY(xen_restore_fl_direct)
BUG
testb $X86_EFLAGS_IF>>8, %ah
- setz PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+ setz PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask
/* Preempt here doesn't matter because that will deal with
any pending interrupts. The pending check may end up being
run on the wrong CPU, but that doesn't hurt. */
/* check for unmasked and pending */
- cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_pending)
+ cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending
jz 1f
2: call check_events
1:
@@ -196,7 +195,7 @@ ENTRY(xen_sysret64)
/* We're already on the usermode stack at this point, but still
with the kernel gs, so we can easily switch back */
movq %rsp, %gs:pda_oldrsp
- movq %gs:pda_kernelstack,%rsp
+ movq PER_CPU_VAR(kernel_stack),%rsp
pushq $__USER_DS
pushq %gs:pda_oldrsp
@@ -213,7 +212,7 @@ ENTRY(xen_sysret32)
/* We're already on the usermode stack at this point, but still
with the kernel gs, so we can easily switch back */
movq %rsp, %gs:pda_oldrsp
- movq %gs:pda_kernelstack, %rsp
+ movq PER_CPU_VAR(kernel_stack), %rsp
pushq $__USER32_DS
pushq %gs:pda_oldrsp
--
1.6.0.2
next prev parent reply other threads:[~2009-01-18 16:44 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-18 16:39 [PATCHSET x86:core/percpu] percpu: move PDA fields to percpu Tejun Heo
2009-01-18 16:39 ` [PATCH 01/12] x86-64: Move irq stats from PDA to per-cpu and consolidate with 32-bit Tejun Heo
2009-01-18 16:39 ` [PATCH 02/12] x86-64: Move TLB state " Tejun Heo
2009-01-18 16:39 ` [PATCH 03/12] x86-64: Convert irqstacks to per-cpu Tejun Heo
2009-01-18 18:16 ` Brian Gerst
2009-01-18 23:38 ` Tejun Heo
2009-01-18 23:43 ` Ingo Molnar
2009-01-19 0:52 ` Tejun Heo
2009-01-18 16:39 ` [PATCH 04/12] x86-64: Convert exception stacks " Tejun Heo
2009-01-18 16:39 ` [PATCH 05/12] x86-64: Move cpu number from PDA to per-cpu and consolidate with 32-bit Tejun Heo
2009-01-18 16:39 ` [PATCH 06/12] x86-64: Move current task " Tejun Heo
2009-01-18 16:39 ` Tejun Heo [this message]
2009-01-18 16:39 ` [PATCH 08/12] x86-64: Move oldrsp from PDA to per-cpu Tejun Heo
2009-01-18 16:39 ` [PATCH 09/12] x86-64: Move irqcount " Tejun Heo
2009-01-18 16:39 ` [PATCH 10/12] x86-64: Move nodenumber " Tejun Heo
2009-01-18 16:39 ` [PATCH 11/12] x86-64: Move isidle " Tejun Heo
2009-01-18 16:39 ` [PATCH 12/12] x86-64: Use absolute displacements for per-cpu accesses Tejun Heo
2009-01-18 16:49 ` [PATCHSET x86:core/percpu] percpu: move PDA fields to percpu Ingo Molnar
2009-01-19 0:51 ` Brian Gerst
2009-01-19 0:52 ` [PATCH 1/5] x86-64: Remove pda_init() Brian Gerst
2009-01-19 0:52 ` [PATCH 2/5] percpu: Refactor percpu.h Brian Gerst
2009-01-19 0:52 ` [PATCH 3/5] x86-64: Rework __per_cpu_load adjustments Brian Gerst
2009-01-19 0:52 ` [PATCH 4/5] x86-64: Remove the PDA Brian Gerst
2009-01-19 0:52 ` [PATCH 5/5] x86-64: Remove pda.h Brian Gerst
2009-01-19 2:46 ` [PATCH 6/6] linker script: kill PERCPU_VADDR_PREALLOC() Tejun Heo
2009-01-19 2:18 ` [PATCH 4/5] x86-64: Remove the PDA Tejun Heo
2009-01-19 2:52 ` Brian Gerst
2009-01-19 3:05 ` Tejun Heo
2009-01-19 2:46 ` [PATCH UPDATED 4/5] x86-64: Move stack_canary into irq_stack Tejun Heo
2009-02-05 22:30 ` [PATCH 2/5] percpu: Refactor percpu.h Tony Luck
2009-02-06 11:11 ` Brian Gerst
2009-02-06 19:06 ` Luck, Tony
2009-01-19 9:53 ` [PATCH 1/5] x86-64: Remove pda_init() Peter Zijlstra
2009-01-19 2:45 ` [PATCHSET x86:core/percpu] percpu: move PDA fields to percpu Tejun Heo
2009-01-19 11:19 ` Ingo Molnar
2009-01-19 11:35 ` Ingo Molnar
2009-01-19 13:43 ` Tejun Heo
2009-01-20 3:34 ` Tejun Heo
2009-01-20 7:24 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1232296759-2253-8-git-send-email-tj@kernel.org \
--to=tj@kernel.org \
--cc=brgerst@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.