All of lore.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@suse.de>
To: linux-kernel@vger.kernel.org
Cc: Alan Cox <alan@linux.intel.com>, Greg Kroah-Hartman <gregkh@suse.de>
Subject: [PATCH 50/79] serial: move the flags into the tty_port field
Date: Sat, 19 Sep 2009 14:36:55 -0700	[thread overview]
Message-ID: <1253396244-7885-50-git-send-email-gregkh@suse.de> (raw)
In-Reply-To: <20090919213345.GB7668@kroah.com>

From: Alan Cox <alan@linux.intel.com>

Fortunately the serial layer was designed to use the same flag values but
with different names. It has its own SUSPENDED flag which is a free slot in
the ASYNC flags so we allocate it in the ASYNC flags instead.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/serial/serial_core.c |  153 +++++++++++++++++++++---------------------
 include/linux/serial.h       |    2 +
 include/linux/serial_core.h  |   48 +++++--------
 3 files changed, 98 insertions(+), 105 deletions(-)

diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 4af3364..744dec9 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -29,10 +29,10 @@
 #include <linux/console.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
-#include <linux/serial_core.h>
 #include <linux/smp_lock.h>
 #include <linux/device.h>
 #include <linux/serial.h> /* for serial_state and serial_icounter_struct */
+#include <linux/serial_core.h>
 #include <linux/delay.h>
 #include <linux/mutex.h>
 
@@ -146,7 +146,7 @@ static int uart_startup(struct uart_state *state, int init_hw)
 	unsigned long page;
 	int retval = 0;
 
-	if (state->flags & UIF_INITIALIZED)
+	if (port->flags & ASYNC_INITIALIZED)
 		return 0;
 
 	/*
@@ -189,14 +189,14 @@ static int uart_startup(struct uart_state *state, int init_hw)
 				uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR);
 		}
 
-		if (state->flags & UIF_CTS_FLOW) {
+		if (port->flags & ASYNC_CTS_FLOW) {
 			spin_lock_irq(&uport->lock);
 			if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS))
 				port->tty->hw_stopped = 1;
 			spin_unlock_irq(&uport->lock);
 		}
 
-		state->flags |= UIF_INITIALIZED;
+		set_bit(ASYNCB_INITIALIZED, &port->flags);
 
 		clear_bit(TTY_IO_ERROR, &port->tty->flags);
 	}
@@ -214,7 +214,7 @@ static int uart_startup(struct uart_state *state, int init_hw)
  */
 static void uart_shutdown(struct uart_state *state)
 {
-	struct uart_port *port = state->uart_port;
+	struct uart_port *uport = state->uart_port;
 	struct tty_struct *tty = state->port.tty;
 
 	/*
@@ -223,14 +223,12 @@ static void uart_shutdown(struct uart_state *state)
 	if (tty)
 		set_bit(TTY_IO_ERROR, &tty->flags);
 
-	if (state->flags & UIF_INITIALIZED) {
-		state->flags &= ~UIF_INITIALIZED;
-
+	if (test_and_clear_bit(ASYNCB_INITIALIZED, &state->port.flags)) {
 		/*
 		 * Turn off DTR and RTS early.
 		 */
 		if (!tty || (tty->termios->c_cflag & HUPCL))
-			uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+			uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS);
 
 		/*
 		 * clear delta_msr_wait queue to avoid mem leaks: we may free
@@ -244,12 +242,12 @@ static void uart_shutdown(struct uart_state *state)
 		/*
 		 * Free the IRQ and disable the port.
 		 */
-		port->ops->shutdown(port);
+		uport->ops->shutdown(uport);
 
 		/*
 		 * Ensure that the IRQ handler isn't running on another CPU.
 		 */
-		synchronize_irq(port->irq);
+		synchronize_irq(uport->irq);
 	}
 
 	/*
@@ -429,15 +427,16 @@ EXPORT_SYMBOL(uart_get_divisor);
 static void
 uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
 {
-	struct tty_struct *tty = state->port.tty;
-	struct uart_port *port = state->uart_port;
+	struct tty_port *port = &state->port;
+	struct tty_struct *tty = port->tty;
+	struct uart_port *uport = state->uart_port;
 	struct ktermios *termios;
 
 	/*
 	 * If we have no tty, termios, or the port does not exist,
 	 * then we can't set the parameters for this port.
 	 */
-	if (!tty || !tty->termios || port->type == PORT_UNKNOWN)
+	if (!tty || !tty->termios || uport->type == PORT_UNKNOWN)
 		return;
 
 	termios = tty->termios;
@@ -446,16 +445,16 @@ uart_change_speed(struct uart_state *state, struct ktermios *old_termios)
 	 * Set flags based on termios cflag
 	 */
 	if (termios->c_cflag & CRTSCTS)
-		state->flags |= UIF_CTS_FLOW;
+		set_bit(ASYNCB_CTS_FLOW, &port->flags);
 	else
-		state->flags &= ~UIF_CTS_FLOW;
+		clear_bit(ASYNCB_CTS_FLOW, &port->flags);
 
 	if (termios->c_cflag & CLOCAL)
-		state->flags &= ~UIF_CHECK_CD;
+		clear_bit(ASYNCB_CHECK_CD, &port->flags);
 	else
-		state->flags |= UIF_CHECK_CD;
+		set_bit(ASYNCB_CHECK_CD, &port->flags);
 
-	port->ops->set_termios(port, termios, old_termios);
+	uport->ops->set_termios(uport, termios, old_termios);
 }
 
 static inline int
@@ -848,7 +847,7 @@ static int uart_set_info(struct uart_state *state,
 	retval = 0;
 	if (uport->type == PORT_UNKNOWN)
 		goto exit;
-	if (state->flags & UIF_INITIALIZED) {
+	if (port->flags & ASYNC_INITIALIZED) {
 		if (((old_flags ^ uport->flags) & UPF_SPD_MASK) ||
 		    old_custom_divisor != uport->custom_divisor) {
 			/*
@@ -1306,7 +1305,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	 * At this point, we stop accepting input.  To do this, we
 	 * disable the receive line status interrupts.
 	 */
-	if (state->flags & UIF_INITIALIZED) {
+	if (port->flags & ASYNC_INITIALIZED) {
 		unsigned long flags;
 		spin_lock_irqsave(&port->lock, flags);
 		uport->ops->stop_rx(uport);
@@ -1337,7 +1336,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
 	/*
 	 * Wake up anyone trying to open this port.
 	 */
-	state->flags &= ~UIF_NORMAL_ACTIVE;
+	clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
 	wake_up_interruptible(&port->open_wait);
 
 done:
@@ -1418,11 +1417,11 @@ static void uart_hangup(struct tty_struct *tty)
 	pr_debug("uart_hangup(%d)\n", state->uart_port->line);
 
 	mutex_lock(&state->mutex);
-	if (state->flags & UIF_NORMAL_ACTIVE) {
+	if (port->flags & ASYNC_NORMAL_ACTIVE) {
 		uart_flush_buffer(tty);
 		uart_shutdown(state);
 		port->count = 0;
-		state->flags &= ~UIF_NORMAL_ACTIVE;
+		clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
 		port->tty = NULL;
 		wake_up_interruptible(&port->open_wait);
 		wake_up_interruptible(&state->delta_msr_wait);
@@ -1493,7 +1492,7 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
 		/*
 		 * If the port has been closed, tell userspace/restart open.
 		 */
-		if (!(state->flags & UIF_INITIALIZED))
+		if (!(port->flags & ASYNC_INITIALIZED))
 			break;
 
 		/*
@@ -1662,8 +1661,8 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
 	/*
 	 * If this is the first open to succeed, adjust things to suit.
 	 */
-	if (retval == 0 && !(state->flags & UIF_NORMAL_ACTIVE)) {
-		state->flags |= UIF_NORMAL_ACTIVE;
+	if (retval == 0 && !(port->flags & ASYNC_NORMAL_ACTIVE)) {
+		set_bit(ASYNCB_NORMAL_ACTIVE, &port->flags);
 
 		uart_update_termios(state);
 	}
@@ -1985,63 +1984,64 @@ static int serial_match_port(struct device *dev, void *data)
 	return dev->devt == devt; /* Actually, only one tty per port */
 }
 
-int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
+int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
 {
-	struct uart_state *state = drv->state + port->line;
+	struct uart_state *state = drv->state + uport->line;
+	struct tty_port *port = &state->port;
 	struct device *tty_dev;
-	struct uart_match match = {port, drv};
+	struct uart_match match = {uport, drv};
 
 	mutex_lock(&state->mutex);
 
-	if (!console_suspend_enabled && uart_console(port)) {
+	if (!console_suspend_enabled && uart_console(uport)) {
 		/* we're going to avoid suspending serial console */
 		mutex_unlock(&state->mutex);
 		return 0;
 	}
 
-	tty_dev = device_find_child(port->dev, &match, serial_match_port);
+	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
 	if (device_may_wakeup(tty_dev)) {
-		enable_irq_wake(port->irq);
+		enable_irq_wake(uport->irq);
 		put_device(tty_dev);
 		mutex_unlock(&state->mutex);
 		return 0;
 	}
-	port->suspended = 1;
+	uport->suspended = 1;
 
-	if (state->flags & UIF_INITIALIZED) {
-		const struct uart_ops *ops = port->ops;
+	if (port->flags & ASYNC_INITIALIZED) {
+		const struct uart_ops *ops = uport->ops;
 		int tries;
 
-		state->flags = (state->flags & ~UIF_INITIALIZED)
-				     | UIF_SUSPENDED;
+		set_bit(ASYNCB_SUSPENDED, &port->flags);
+		clear_bit(ASYNCB_INITIALIZED, &port->flags);
 
-		spin_lock_irq(&port->lock);
-		ops->stop_tx(port);
-		ops->set_mctrl(port, 0);
-		ops->stop_rx(port);
-		spin_unlock_irq(&port->lock);
+		spin_lock_irq(&uport->lock);
+		ops->stop_tx(uport);
+		ops->set_mctrl(uport, 0);
+		ops->stop_rx(uport);
+		spin_unlock_irq(&uport->lock);
 
 		/*
 		 * Wait for the transmitter to empty.
 		 */
-		for (tries = 3; !ops->tx_empty(port) && tries; tries--)
+		for (tries = 3; !ops->tx_empty(uport) && tries; tries--)
 			msleep(10);
 		if (!tries)
 			printk(KERN_ERR "%s%s%s%d: Unable to drain "
 					"transmitter\n",
-			       port->dev ? dev_name(port->dev) : "",
-			       port->dev ? ": " : "",
+			       uport->dev ? dev_name(uport->dev) : "",
+			       uport->dev ? ": " : "",
 			       drv->dev_name,
-			       drv->tty_driver->name_base + port->line);
+			       drv->tty_driver->name_base + uport->line);
 
-		ops->shutdown(port);
+		ops->shutdown(uport);
 	}
 
 	/*
 	 * Disable the console device before suspending.
 	 */
-	if (uart_console(port))
-		console_stop(port->cons);
+	if (uart_console(uport))
+		console_stop(uport->cons);
 
 	uart_change_pm(state, 3);
 
@@ -2050,67 +2050,68 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
 	return 0;
 }
 
-int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
+int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
 {
-	struct uart_state *state = drv->state + port->line;
+	struct uart_state *state = drv->state + uport->line;
+	struct tty_port *port = &state->port;
 	struct device *tty_dev;
-	struct uart_match match = {port, drv};
+	struct uart_match match = {uport, drv};
 
 	mutex_lock(&state->mutex);
 
-	if (!console_suspend_enabled && uart_console(port)) {
+	if (!console_suspend_enabled && uart_console(uport)) {
 		/* no need to resume serial console, it wasn't suspended */
 		mutex_unlock(&state->mutex);
 		return 0;
 	}
 
-	tty_dev = device_find_child(port->dev, &match, serial_match_port);
-	if (!port->suspended && device_may_wakeup(tty_dev)) {
-		disable_irq_wake(port->irq);
+	tty_dev = device_find_child(uport->dev, &match, serial_match_port);
+	if (!uport->suspended && device_may_wakeup(tty_dev)) {
+		disable_irq_wake(uport->irq);
 		mutex_unlock(&state->mutex);
 		return 0;
 	}
-	port->suspended = 0;
+	uport->suspended = 0;
 
 	/*
 	 * Re-enable the console device after suspending.
 	 */
-	if (uart_console(port)) {
+	if (uart_console(uport)) {
 		struct ktermios termios;
 
 		/*
 		 * First try to use the console cflag setting.
 		 */
 		memset(&termios, 0, sizeof(struct ktermios));
-		termios.c_cflag = port->cons->cflag;
+		termios.c_cflag = uport->cons->cflag;
 
 		/*
 		 * If that's unset, use the tty termios setting.
 		 */
-		if (state->port.tty && termios.c_cflag == 0)
-			termios = *state->port.tty->termios;
+		if (port->tty && termios.c_cflag == 0)
+			termios = *port->tty->termios;
 
 		uart_change_pm(state, 0);
-		port->ops->set_termios(port, &termios, NULL);
-		console_start(port->cons);
+		uport->ops->set_termios(uport, &termios, NULL);
+		console_start(uport->cons);
 	}
 
-	if (state->flags & UIF_SUSPENDED) {
-		const struct uart_ops *ops = port->ops;
+	if (port->flags & ASYNC_SUSPENDED) {
+		const struct uart_ops *ops = uport->ops;
 		int ret;
 
 		uart_change_pm(state, 0);
-		spin_lock_irq(&port->lock);
-		ops->set_mctrl(port, 0);
-		spin_unlock_irq(&port->lock);
-		ret = ops->startup(port);
+		spin_lock_irq(&uport->lock);
+		ops->set_mctrl(uport, 0);
+		spin_unlock_irq(&uport->lock);
+		ret = ops->startup(uport);
 		if (ret == 0) {
 			uart_change_speed(state, NULL);
-			spin_lock_irq(&port->lock);
-			ops->set_mctrl(port, port->mctrl);
-			ops->start_tx(port);
-			spin_unlock_irq(&port->lock);
-			state->flags |= UIF_INITIALIZED;
+			spin_lock_irq(&uport->lock);
+			ops->set_mctrl(uport, uport->mctrl);
+			ops->start_tx(uport);
+			spin_unlock_irq(&uport->lock);
+			set_bit(ASYNCB_INITIALIZED, &port->flags);
 		} else {
 			/*
 			 * Failed to resume - maybe hardware went away?
@@ -2120,7 +2121,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
 			uart_shutdown(state);
 		}
 
-		state->flags &= ~UIF_SUSPENDED;
+		clear_bit(ASYNCB_SUSPENDED, &port->flags);
 	}
 
 	mutex_unlock(&state->mutex);
diff --git a/include/linux/serial.h b/include/linux/serial.h
index e5bb75a..c8613c3 100644
--- a/include/linux/serial.h
+++ b/include/linux/serial.h
@@ -122,6 +122,7 @@ struct serial_uart_config {
 
 /* Internal flags used only by kernel */
 #define ASYNCB_INITIALIZED	31 /* Serial port was initialized */
+#define ASYNCB_SUSPENDED	30 /* Serial port is suspended */
 #define ASYNCB_NORMAL_ACTIVE	29 /* Normal device is active */
 #define ASYNCB_BOOT_AUTOCONF	28 /* Autoconfigure port on bootup */
 #define ASYNCB_CLOSING		27 /* Serial port is closing */
@@ -133,6 +134,7 @@ struct serial_uart_config {
 #define ASYNCB_FIRST_KERNEL	22
 
 #define ASYNC_HUP_NOTIFY	(1U << ASYNCB_HUP_NOTIFY)
+#define ASYNC_SUSPENDED		(1U << ASYNCB_SUSPENDED)
 #define ASYNC_FOURPORT		(1U << ASYNCB_FOURPORT)
 #define ASYNC_SAK		(1U << ASYNCB_SAK)
 #define ASYNC_SPLIT_TERMIOS	(1U << ASYNCB_SPLIT_TERMIOS)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 63ad909..284ef7f 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -20,6 +20,8 @@
 #ifndef LINUX_SERIAL_CORE_H
 #define LINUX_SERIAL_CORE_H
 
+#include <linux/serial.h>
+
 /*
  * The type definitions.  These are from Ted Ts'o's serial.h
  */
@@ -356,19 +358,6 @@ struct uart_state {
 
 	int			pm_state;
 	struct circ_buf		xmit;
-	uif_t			flags;
-
-/*
- * Definitions for info->flags.  These are _private_ to serial_core, and
- * are specific to this structure.  They may be queried by low level drivers.
- *
- * FIXME: use the ASY_ definitions
- */
-#define UIF_CHECK_CD		((__force uif_t) (1 << 25))
-#define UIF_CTS_FLOW		((__force uif_t) (1 << 26))
-#define UIF_NORMAL_ACTIVE	((__force uif_t) (1 << 29))
-#define UIF_INITIALIZED		((__force uif_t) (1 << 31))
-#define UIF_SUSPENDED		((__force uif_t) (1 << 30))
 
 	struct tasklet_struct	tlet;
 	wait_queue_head_t	delta_msr_wait;
@@ -509,22 +498,23 @@ static inline int uart_handle_break(struct uart_port *port)
  *	@status: new carrier detect status, nonzero if active
  */
 static inline void
-uart_handle_dcd_change(struct uart_port *port, unsigned int status)
+uart_handle_dcd_change(struct uart_port *uport, unsigned int status)
 {
-	struct uart_state *state = port->state;
+	struct uart_state *state = uport->state;
+	struct tty_port *port = &state->port;
 
-	port->icount.dcd++;
+	uport->icount.dcd++;
 
 #ifdef CONFIG_HARD_PPS
-	if ((port->flags & UPF_HARDPPS_CD) && status)
+	if ((uport->flags & UPF_HARDPPS_CD) && status)
 		hardpps();
 #endif
 
-	if (state->flags & UIF_CHECK_CD) {
+	if (port->flags & ASYNC_CHECK_CD) {
 		if (status)
-			wake_up_interruptible(&state->port.open_wait);
-		else if (state->port.tty)
-			tty_hangup(state->port.tty);
+			wake_up_interruptible(&port->open_wait);
+		else if (port->tty)
+			tty_hangup(port->tty);
 	}
 }
 
@@ -534,24 +524,24 @@ uart_handle_dcd_change(struct uart_port *port, unsigned int status)
  *	@status: new clear to send status, nonzero if active
  */
 static inline void
-uart_handle_cts_change(struct uart_port *port, unsigned int status)
+uart_handle_cts_change(struct uart_port *uport, unsigned int status)
 {
-	struct uart_state *state = port->state;
-	struct tty_struct *tty = state->port.tty;
+	struct tty_port *port = &uport->state->port;
+	struct tty_struct *tty = port->tty;
 
-	port->icount.cts++;
+	uport->icount.cts++;
 
-	if (state->flags & UIF_CTS_FLOW) {
+	if (port->flags & ASYNC_CTS_FLOW) {
 		if (tty->hw_stopped) {
 			if (status) {
 				tty->hw_stopped = 0;
-				port->ops->start_tx(port);
-				uart_write_wakeup(port);
+				uport->ops->start_tx(uport);
+				uart_write_wakeup(uport);
 			}
 		} else {
 			if (!status) {
 				tty->hw_stopped = 1;
-				port->ops->stop_tx(port);
+				uport->ops->stop_tx(uport);
 			}
 		}
 	}
-- 
1.6.4.2


  parent reply	other threads:[~2009-09-19 21:42 UTC|newest]

Thread overview: 86+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-09-19 21:33 [GIT PATCH] TTY patches for 2.6.31-git Greg KH
2009-09-19 21:36 ` [PATCH 01/79] tty: gigaset: really fix chars_in_buffer Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 02/79] serial: bfin_5xx: fix building as module when early printk is enabled Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 03/79] tty: serial/pcmcia: add ID for Advantech card Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 04/79] tty-ldisc: make /proc/tty/ldiscs use ldisc_ops instead of ldiscs Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 05/79] tty-ldisc: get rid of tty_ldisc_try_get() helper function Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 06/79] tty: includecheck fix: drivers/char, vt.c Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 07/79] tty: icom: bit and/or confusion? Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 08/79] cyclades: add tty refcounting Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 09/79] cyclades: remove block_til_ready Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 10/79] cyclades: avoid addresses recomputation Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 11/79] cyclades: switch to tty_port_hangup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 12/79] cyclades: close cleanup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 13/79] cyclades: overall cleanup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 14/79] cyclades: sleep instead busy-wait Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 15/79] cyclades: use dtr_rts helpers Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 16/79] cyclades: merge cy_startup tails Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 17/79] cyclades: ioctls cleanup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 18/79] cyclades: tiocm cleanup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 19/79] cyclades: introduce cyy_readb/writeb Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 20/79] cyclades: remove more duplicated code Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 21/79] slip: Clean up create and destroy Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 22/79] kfifo: Use "const" definitions Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 23/79] MOS7720 has no tiocmget method Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 24/79] tty: usb_serial_mos7720: Fix get_lsr_info Greg Kroah-Hartman
2010-01-26 11:08   ` Kees Schoenmakers
2010-01-26 11:09   ` Kees Schoenmakers
2009-09-19 21:36 ` [PATCH 25/79] tty: Fix a typo noted in passing Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 26/79] mos7840: remove old dead modem logic Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 27/79] serial: 8250: add IRQ trigger support Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 28/79] 8250: Now honours baud rate lower bounds Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 29/79] tty: Add a full port_close function Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 30/79] riscom8: split open and close methods up Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 31/79] mxser: Split close ready for a standard tty_port_close method Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 32/79] isicom: Split the close hardware bits out Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 33/79] tty: riscom8 kref and tty_port_close Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 34/79] cyclades: use the full port_close function Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 35/79] tty: make the kref destructor occur asynchronously Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 36/79] cdc_acm: Fix to use modern speed interfaces Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 37/79] tty: USB hangup is racy Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 38/79] tty: remove dtr/rts use from the driver open methods Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 39/79] tty: USB can now use the shutdown method for kref based freeing of ports Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 40/79] vt: add an event interface Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 41/79] vt: remove power stuff from kernel/power Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 42/79] vt: move kernel stuff out of vt.h Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 43/79] vt: add an activate and lock Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 44/79] tty: USB does not need the filp argument in the drivers Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 45/79] isicom: split the open method for the isicom device Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 46/79] serial: kill off uart_info Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 47/79] serial: Fold closing_* fields into the tty_port ones Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 48/79] serial: use tty_port pointers in the core code Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 49/79] serial: move count into the tty_port version Greg Kroah-Hartman
2009-09-19 21:36 ` Greg Kroah-Hartman [this message]
2009-09-19 21:36 ` [PATCH 51/79] serial: kill off uif_t Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 52/79] serial: replace the state mutex with the tty port mutex Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 53/79] serial: move delta_msr_wait into the tty_port Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 54/79] serial: move port users helper Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 55/79] serial: kill USF_CLOSING_* definitions Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 56/79] serial: introduce tty krefs Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 57/79] Set proper console speed on resume if console suspend is disabled Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 58/79] tty: USB serial termios bits Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 59/79] n_tty: honor opost flag for echoes Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 60/79] n_tty: move echoctl check and clean up logic Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 61/79] tty: handle VT specific compat ioctls in vt driver Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 62/79] tty: vt: use printk_once Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 63/79] tty: Power: fix suspend vt regression Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 64/79] TTY: fix typos Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 65/79] tty: riscom8, fix shutdown declaration Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 66/79] tty: riscom8, fix tty refcnt Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 67/79] tty: USB: serial/mct_u232, " Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 68/79] uartlite: support shared interrupt lines Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 69/79] tty: Char: mxser, add support for CP112UL Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 70/79] tty: Char: mxser, use THRE for ASPP_OQUEUE ioctl Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 71/79] usb-serial: change referencing of port and serial structures Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 72/79] usb-serial: put subroutines in logical order Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 73/79] usb-serial: change logic of serial lookups Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 74/79] usb-serial: acquire references when a new tty is installed Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 75/79] usb-serial: fix termios initialization logic Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 76/79] usb-serial: rename subroutines Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 77/79] usb-serial: add missing tests and debug lines Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 78/79] usb-serial: straighten out serial_open Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 79/79] USB serial: update the console driver Greg Kroah-Hartman
2009-09-30 10:09 ` [origin tree boot crash] Re: [GIT PATCH] TTY patches for 2.6.31-git Ingo Molnar
2009-09-30 10:17   ` Alan Cox
2009-10-01  8:21     ` Ingo Molnar
2009-10-01 10:36       ` Alan Cox

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1253396244-7885-50-git-send-email-gregkh@suse.de \
    --to=gregkh@suse.de \
    --cc=alan@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.