From: Greg Kroah-Hartman <gregkh@suse.de>
To: linux-kernel@vger.kernel.org
Cc: Alan Cox <alan@linux.intel.com>, Greg Kroah-Hartman <gregkh@suse.de>
Subject: [PATCH 58/79] tty: USB serial termios bits
Date: Sat, 19 Sep 2009 14:37:03 -0700 [thread overview]
Message-ID: <1253396244-7885-58-git-send-email-gregkh@suse.de> (raw)
In-Reply-To: <20090919213345.GB7668@kroah.com>
From: Alan Cox <alan@linux.intel.com>
Various drivers have hacks to mangle termios structures. This stems from
the fact there is no nice setup hook for configuring the termios settings
when the port is created
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/char/tty_io.c | 1 +
drivers/usb/serial/ark3116.c | 46 +++++++++----------------------------
drivers/usb/serial/cypress_m8.c | 12 ++-------
drivers/usb/serial/empeg.c | 12 ++-------
drivers/usb/serial/iuu_phoenix.c | 31 +++++++++++--------------
drivers/usb/serial/kobil_sct.c | 22 +++++++++---------
drivers/usb/serial/oti6858.c | 21 ++++++++---------
drivers/usb/serial/spcp8x5.c | 21 ++++++++---------
drivers/usb/serial/usb-serial.c | 38 ++++++++++++++++++++++++++++++-
drivers/usb/serial/whiteheat.c | 6 ++--
include/linux/usb/serial.h | 3 ++
11 files changed, 106 insertions(+), 107 deletions(-)
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 385cca7..05f443c 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1184,6 +1184,7 @@ int tty_init_termios(struct tty_struct *tty)
tty->termios->c_ospeed = tty_termios_baud_rate(tty->termios);
return 0;
}
+EXPORT_SYMBOL_GPL(tty_init_termios);
/**
* tty_driver_install_tty() - install a tty entry in the driver
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 7ddde4d..5d25d3e 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -35,11 +35,6 @@ static struct usb_device_id id_table [] = {
};
MODULE_DEVICE_TABLE(usb, id_table);
-struct ark3116_private {
- spinlock_t lock;
- u8 termios_initialized;
-};
-
static inline void ARK3116_SND(struct usb_serial *serial, int seq,
__u8 request, __u8 requesttype,
__u16 value, __u16 index)
@@ -82,22 +77,11 @@ static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
static int ark3116_attach(struct usb_serial *serial)
{
char *buf;
- struct ark3116_private *priv;
- int i;
-
- for (i = 0; i < serial->num_ports; ++i) {
- priv = kzalloc(sizeof(struct ark3116_private), GFP_KERNEL);
- if (!priv)
- goto cleanup;
- spin_lock_init(&priv->lock);
-
- usb_set_serial_port_data(serial->port[i], priv);
- }
buf = kmalloc(1, GFP_KERNEL);
if (!buf) {
dbg("error kmalloc -> out of mem?");
- goto cleanup;
+ return -ENOMEM;
}
/* 3 */
@@ -149,13 +133,16 @@ static int ark3116_attach(struct usb_serial *serial)
kfree(buf);
return 0;
+}
-cleanup:
- for (--i; i >= 0; --i) {
- kfree(usb_get_serial_port_data(serial->port[i]));
- usb_set_serial_port_data(serial->port[i], NULL);
- }
- return -ENOMEM;
+static void ark3116_init_termios(struct tty_struct *tty)
+{
+ struct ktermios *termios = tty->termios;
+ *termios = tty_std_termios;
+ termios->c_cflag = B9600 | CS8
+ | CREAD | HUPCL | CLOCAL;
+ termios->c_ispeed = 9600;
+ termios->c_ospeed = 9600;
}
static void ark3116_set_termios(struct tty_struct *tty,
@@ -163,10 +150,8 @@ static void ark3116_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
- struct ark3116_private *priv = usb_get_serial_port_data(port);
struct ktermios *termios = tty->termios;
unsigned int cflag = termios->c_cflag;
- unsigned long flags;
int baud;
int ark3116_baud;
char *buf;
@@ -176,16 +161,6 @@ static void ark3116_set_termios(struct tty_struct *tty,
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave(&priv->lock, flags);
- if (!priv->termios_initialized) {
- *termios = tty_std_termios;
- termios->c_cflag = B9600 | CS8
- | CREAD | HUPCL | CLOCAL;
- termios->c_ispeed = 9600;
- termios->c_ospeed = 9600;
- priv->termios_initialized = 1;
- }
- spin_unlock_irqrestore(&priv->lock, flags);
cflag = termios->c_cflag;
termios->c_cflag &= ~(CMSPAR|CRTSCTS);
@@ -454,6 +429,7 @@ static struct usb_serial_driver ark3116_device = {
.num_ports = 1,
.attach = ark3116_attach,
.set_termios = ark3116_set_termios,
+ .init_termios = ark3116_init_termios,
.ioctl = ark3116_ioctl,
.tiocmget = ark3116_tiocmget,
.open = ark3116_open,
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index df1adb9..e0a8b71 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -657,15 +657,7 @@ static int cypress_open(struct tty_struct *tty, struct usb_serial_port *port)
spin_unlock_irqrestore(&priv->lock, flags);
/* Set termios */
- result = cypress_write(tty, port, NULL, 0);
-
- if (result) {
- dev_err(&port->dev,
- "%s - failed setting the control lines - error %d\n",
- __func__, result);
- return result;
- } else
- dbg("%s - success setting the control lines", __func__);
+ cypress_send(port);
if (tty)
cypress_set_termios(tty, port, &priv->tmp_termios);
@@ -1003,6 +995,8 @@ static void cypress_set_termios(struct tty_struct *tty,
dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
+ /* We can't clean this one up as we don't know the device type
+ early enough */
if (!priv->termios_initialized) {
if (priv->chiptype == CT_EARTHMATE) {
*(tty->termios) = tty_std_termios;
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index da559a7..33c9e9c 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -89,8 +89,7 @@ static int empeg_chars_in_buffer(struct tty_struct *tty);
static void empeg_throttle(struct tty_struct *tty);
static void empeg_unthrottle(struct tty_struct *tty);
static int empeg_startup(struct usb_serial *serial);
-static void empeg_set_termios(struct tty_struct *tty,
- struct usb_serial_port *port, struct ktermios *old_termios);
+static void empeg_init_termios(struct tty_struct *tty);
static void empeg_write_bulk_callback(struct urb *urb);
static void empeg_read_bulk_callback(struct urb *urb);
@@ -122,7 +121,7 @@ static struct usb_serial_driver empeg_device = {
.throttle = empeg_throttle,
.unthrottle = empeg_unthrottle,
.attach = empeg_startup,
- .set_termios = empeg_set_termios,
+ .init_termios = empeg_init_termios,
.write = empeg_write,
.write_room = empeg_write_room,
.chars_in_buffer = empeg_chars_in_buffer,
@@ -148,9 +147,6 @@ static int empeg_open(struct tty_struct *tty,struct usb_serial_port *port)
dbg("%s - port %d", __func__, port->number);
- /* Force default termio settings */
- empeg_set_termios(tty, port, NULL);
-
bytes_in = 0;
bytes_out = 0;
@@ -423,11 +419,9 @@ static int empeg_startup(struct usb_serial *serial)
}
-static void empeg_set_termios(struct tty_struct *tty,
- struct usb_serial_port *port, struct ktermios *old_termios)
+static void empeg_init_termios(struct tty_struct *tty)
{
struct ktermios *termios = tty->termios;
- dbg("%s - port %d", __func__, port->number);
/*
* The empeg-car player wants these particular tty settings.
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index f3f9be0..6138c1c 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -71,7 +71,6 @@ struct iuu_private {
spinlock_t lock; /* store irq state */
wait_queue_head_t delta_msr_wait;
u8 line_status;
- u8 termios_initialized;
int tiostatus; /* store IUART SIGNAL for tiocmget call */
u8 reset; /* if 1 reset is needed */
int poll; /* number of poll */
@@ -1018,13 +1017,24 @@ static void iuu_close(struct usb_serial_port *port)
}
}
+static void iuu_init_termios(struct tty_struct *tty)
+{
+ *(tty->termios) = tty_std_termios;
+ tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
+ | TIOCM_CTS | CSTOPB | PARENB;
+ tty->termios->c_ispeed = 9600;
+ tty->termios->c_ospeed = 9600;
+ tty->termios->c_lflag = 0;
+ tty->termios->c_oflag = 0;
+ tty->termios->c_iflag = 0;
+}
+
static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
u8 *buf;
int result;
u32 actual;
- unsigned long flags;
struct iuu_private *priv = usb_get_serial_port_data(port);
dbg("%s - port %d", __func__, port->number);
@@ -1063,21 +1073,7 @@ static int iuu_open(struct tty_struct *tty, struct usb_serial_port *port)
port->bulk_in_buffer, 512,
NULL, NULL);
- /* set the termios structure */
- spin_lock_irqsave(&priv->lock, flags);
- if (tty && !priv->termios_initialized) {
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = CLOCAL | CREAD | CS8 | B9600
- | TIOCM_CTS | CSTOPB | PARENB;
- tty->termios->c_ispeed = 9600;
- tty->termios->c_ospeed = 9600;
- tty->termios->c_lflag = 0;
- tty->termios->c_oflag = 0;
- tty->termios->c_iflag = 0;
- priv->termios_initialized = 1;
- priv->poll = 0;
- }
- spin_unlock_irqrestore(&priv->lock, flags);
+ priv->poll = 0;
/* initialize writebuf */
#define FISH(a, b, c, d) do { \
@@ -1200,6 +1196,7 @@ static struct usb_serial_driver iuu_device = {
.tiocmget = iuu_tiocmget,
.tiocmset = iuu_tiocmset,
.set_termios = iuu_set_termios,
+ .init_termios = iuu_init_termios,
.attach = iuu_startup,
.release = iuu_release,
};
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 9790157..45ea694 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -84,7 +84,7 @@ static void kobil_read_int_callback(struct urb *urb);
static void kobil_write_callback(struct urb *purb);
static void kobil_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
-
+static void kobil_init_termios(struct tty_struct *tty);
static struct usb_device_id id_table [] = {
{ USB_DEVICE(KOBIL_VENDOR_ID, KOBIL_ADAPTER_B_PRODUCT_ID) },
@@ -119,6 +119,7 @@ static struct usb_serial_driver kobil_device = {
.release = kobil_release,
.ioctl = kobil_ioctl,
.set_termios = kobil_set_termios,
+ .init_termios = kobil_init_termios,
.tiocmget = kobil_tiocmget,
.tiocmset = kobil_tiocmset,
.open = kobil_open,
@@ -209,6 +210,15 @@ static void kobil_release(struct usb_serial *serial)
kfree(usb_get_serial_port_data(serial->port[i]));
}
+static void kobil_init_termios(struct tty_struct *tty)
+{
+ /* Default to echo off and other sane device settings */
+ tty->termios->c_lflag = 0;
+ tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN | XCASE);
+ tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
+ /* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */
+ tty->termios->c_oflag &= ~ONLCR;
+}
static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
{
@@ -224,16 +234,6 @@ static int kobil_open(struct tty_struct *tty, struct usb_serial_port *port)
/* someone sets the dev to 0 if the close method has been called */
port->interrupt_in_urb->dev = port->serial->dev;
- if (tty) {
-
- /* Default to echo off and other sane device settings */
- tty->termios->c_lflag = 0;
- tty->termios->c_lflag &= ~(ISIG | ICANON | ECHO | IEXTEN |
- XCASE);
- tty->termios->c_iflag = IGNBRK | IGNPAR | IXOFF;
- /* do NOT translate CR to CR-NL (0x0A -> 0x0A 0x0D) */
- tty->termios->c_oflag &= ~ONLCR;
- }
/* allocate memory for transfer buffer */
transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
if (!transfer_buffer)
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index e90f88a..0f4a70c 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -145,6 +145,7 @@ static int oti6858_open(struct tty_struct *tty, struct usb_serial_port *port);
static void oti6858_close(struct usb_serial_port *port);
static void oti6858_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
+static void oti6858_init_termios(struct tty_struct *tty);
static int oti6858_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
static void oti6858_read_int_callback(struct urb *urb);
@@ -185,6 +186,7 @@ static struct usb_serial_driver oti6858_device = {
.write = oti6858_write,
.ioctl = oti6858_ioctl,
.set_termios = oti6858_set_termios,
+ .init_termios = oti6858_init_termios,
.tiocmget = oti6858_tiocmget,
.tiocmset = oti6858_tiocmset,
.read_bulk_callback = oti6858_read_bulk_callback,
@@ -205,7 +207,6 @@ struct oti6858_private {
struct {
u8 read_urb_in_use;
u8 write_urb_in_use;
- u8 termios_initialized;
} flags;
struct delayed_work delayed_write_work;
@@ -446,6 +447,14 @@ static int oti6858_chars_in_buffer(struct tty_struct *tty)
return chars;
}
+static void oti6858_init_termios(struct tty_struct *tty)
+{
+ *(tty->termios) = tty_std_termios;
+ tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->termios->c_ispeed = 38400;
+ tty->termios->c_ospeed = 38400;
+}
+
static void oti6858_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
@@ -463,16 +472,6 @@ static void oti6858_set_termios(struct tty_struct *tty,
return;
}
- spin_lock_irqsave(&priv->lock, flags);
- if (!priv->flags.termios_initialized) {
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B38400 | CS8 | CREAD | HUPCL | CLOCAL;
- tty->termios->c_ispeed = 38400;
- tty->termios->c_ospeed = 38400;
- priv->flags.termios_initialized = 1;
- }
- spin_unlock_irqrestore(&priv->lock, flags);
-
cflag = tty->termios->c_cflag;
spin_lock_irqsave(&priv->lock, flags);
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 8b312a0..61e7c40 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -299,7 +299,6 @@ struct spcp8x5_private {
wait_queue_head_t delta_msr_wait;
u8 line_control;
u8 line_status;
- u8 termios_initialized;
};
/* desc : when device plug in,this function would be called.
@@ -498,6 +497,15 @@ static void spcp8x5_close(struct usb_serial_port *port)
dev_dbg(&port->dev, "usb_unlink_urb(read_urb) = %d\n", result);
}
+static void spcp8x5_init_termios(struct tty_struct *tty)
+{
+ /* for the 1st time call this function */
+ *(tty->termios) = tty_std_termios;
+ tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->termios->c_ispeed = 115200;
+ tty->termios->c_ospeed = 115200;
+}
+
/* set the serial param for transfer. we should check if we really need to
* transfer. if we set flow control we should do this too. */
static void spcp8x5_set_termios(struct tty_struct *tty,
@@ -514,16 +522,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
int i;
u8 control;
- /* for the 1st time call this function */
- spin_lock_irqsave(&priv->lock, flags);
- if (!priv->termios_initialized) {
- *(tty->termios) = tty_std_termios;
- tty->termios->c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
- tty->termios->c_ispeed = 115200;
- tty->termios->c_ospeed = 115200;
- priv->termios_initialized = 1;
- }
- spin_unlock_irqrestore(&priv->lock, flags);
/* check that they really want us to change something */
if (!tty_termios_hw_change(tty->termios, old_termios))
@@ -1008,6 +1006,7 @@ static struct usb_serial_driver spcp8x5_device = {
.carrier_raised = spcp8x5_carrier_raised,
.write = spcp8x5_write,
.set_termios = spcp8x5_set_termios,
+ .init_termios = spcp8x5_init_termios,
.ioctl = spcp8x5_ioctl,
.tiocmget = spcp8x5_tiocmget,
.tiocmset = spcp8x5_tiocmset,
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 3dda684..80c1f4d 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -721,6 +721,41 @@ static const struct tty_port_operations serial_port_ops = {
.dtr_rts = serial_dtr_rts,
};
+/**
+ * serial_install - install tty
+ * @driver: the driver (USB in our case)
+ * @tty: the tty being created
+ *
+ * Create the termios objects for this tty. We use the default USB
+ * serial ones but permit them to be overriddenby serial->type->termios.
+ * This lets us remove all the ugly hackery
+ */
+
+static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ int idx = tty->index;
+ struct usb_serial *serial;
+ int retval;
+
+ /* If the termios setup has yet to be done */
+ if (tty->driver->termios[idx] == NULL) {
+ /* perform the standard setup */
+ retval = tty_init_termios(tty);
+ if (retval)
+ return retval;
+ /* allow the driver to update it */
+ serial = usb_serial_get_by_index(tty->index);
+ if (serial->type->init_termios)
+ serial->type->init_termios(tty);
+ usb_serial_put(serial);
+ }
+ /* Final install (we use the default method) */
+ tty_driver_kref_get(driver);
+ tty->count++;
+ driver->ttys[idx] = tty;
+ return 0;
+}
+
int usb_serial_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
@@ -1228,7 +1263,8 @@ static const struct tty_operations serial_ops = {
.chars_in_buffer = serial_chars_in_buffer,
.tiocmget = serial_tiocmget,
.tiocmset = serial_tiocmset,
- .shutdown = serial_do_free,
+ .shutdown = serial_do_free,
+ .install = serial_install,
.proc_fops = &serial_proc_fops,
};
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 81f2ae5..62424ee 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -259,7 +259,7 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command,
__u8 *data, __u8 datasize);
static int firm_open(struct usb_serial_port *port);
static int firm_close(struct usb_serial_port *port);
-static int firm_setup_port(struct tty_struct *tty);
+static void firm_setup_port(struct tty_struct *tty);
static int firm_set_rts(struct usb_serial_port *port, __u8 onoff);
static int firm_set_dtr(struct usb_serial_port *port, __u8 onoff);
static int firm_set_break(struct usb_serial_port *port, __u8 onoff);
@@ -1210,7 +1210,7 @@ static int firm_close(struct usb_serial_port *port)
}
-static int firm_setup_port(struct tty_struct *tty)
+static void firm_setup_port(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct whiteheat_port_settings port_settings;
@@ -1285,7 +1285,7 @@ static int firm_setup_port(struct tty_struct *tty)
port_settings.lloop = 0;
/* now send the message to the device */
- return firm_send_command(port, WHITEHEAT_SETUP_PORT,
+ firm_send_command(port, WHITEHEAT_SETUP_PORT,
(__u8 *)&port_settings, sizeof(port_settings));
}
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 1cbaf4a..7b85e32 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -260,6 +260,9 @@ struct usb_serial_driver {
be an attached tty at this point */
void (*dtr_rts)(struct usb_serial_port *port, int on);
int (*carrier_raised)(struct usb_serial_port *port);
+ /* Called by the usb serial hooks to allow the user to rework the
+ termios state */
+ void (*init_termios)(struct tty_struct *tty);
/* USB events */
void (*read_int_callback)(struct urb *urb);
void (*write_int_callback)(struct urb *urb);
--
1.6.4.2
next prev parent reply other threads:[~2009-09-19 21:43 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-19 21:33 [GIT PATCH] TTY patches for 2.6.31-git Greg KH
2009-09-19 21:36 ` [PATCH 01/79] tty: gigaset: really fix chars_in_buffer Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 02/79] serial: bfin_5xx: fix building as module when early printk is enabled Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 03/79] tty: serial/pcmcia: add ID for Advantech card Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 04/79] tty-ldisc: make /proc/tty/ldiscs use ldisc_ops instead of ldiscs Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 05/79] tty-ldisc: get rid of tty_ldisc_try_get() helper function Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 06/79] tty: includecheck fix: drivers/char, vt.c Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 07/79] tty: icom: bit and/or confusion? Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 08/79] cyclades: add tty refcounting Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 09/79] cyclades: remove block_til_ready Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 10/79] cyclades: avoid addresses recomputation Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 11/79] cyclades: switch to tty_port_hangup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 12/79] cyclades: close cleanup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 13/79] cyclades: overall cleanup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 14/79] cyclades: sleep instead busy-wait Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 15/79] cyclades: use dtr_rts helpers Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 16/79] cyclades: merge cy_startup tails Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 17/79] cyclades: ioctls cleanup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 18/79] cyclades: tiocm cleanup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 19/79] cyclades: introduce cyy_readb/writeb Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 20/79] cyclades: remove more duplicated code Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 21/79] slip: Clean up create and destroy Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 22/79] kfifo: Use "const" definitions Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 23/79] MOS7720 has no tiocmget method Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 24/79] tty: usb_serial_mos7720: Fix get_lsr_info Greg Kroah-Hartman
2010-01-26 11:08 ` Kees Schoenmakers
2010-01-26 11:09 ` Kees Schoenmakers
2009-09-19 21:36 ` [PATCH 25/79] tty: Fix a typo noted in passing Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 26/79] mos7840: remove old dead modem logic Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 27/79] serial: 8250: add IRQ trigger support Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 28/79] 8250: Now honours baud rate lower bounds Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 29/79] tty: Add a full port_close function Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 30/79] riscom8: split open and close methods up Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 31/79] mxser: Split close ready for a standard tty_port_close method Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 32/79] isicom: Split the close hardware bits out Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 33/79] tty: riscom8 kref and tty_port_close Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 34/79] cyclades: use the full port_close function Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 35/79] tty: make the kref destructor occur asynchronously Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 36/79] cdc_acm: Fix to use modern speed interfaces Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 37/79] tty: USB hangup is racy Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 38/79] tty: remove dtr/rts use from the driver open methods Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 39/79] tty: USB can now use the shutdown method for kref based freeing of ports Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 40/79] vt: add an event interface Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 41/79] vt: remove power stuff from kernel/power Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 42/79] vt: move kernel stuff out of vt.h Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 43/79] vt: add an activate and lock Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 44/79] tty: USB does not need the filp argument in the drivers Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 45/79] isicom: split the open method for the isicom device Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 46/79] serial: kill off uart_info Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 47/79] serial: Fold closing_* fields into the tty_port ones Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 48/79] serial: use tty_port pointers in the core code Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 49/79] serial: move count into the tty_port version Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 50/79] serial: move the flags into the tty_port field Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 51/79] serial: kill off uif_t Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 52/79] serial: replace the state mutex with the tty port mutex Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 53/79] serial: move delta_msr_wait into the tty_port Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 54/79] serial: move port users helper Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 55/79] serial: kill USF_CLOSING_* definitions Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 56/79] serial: introduce tty krefs Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 57/79] Set proper console speed on resume if console suspend is disabled Greg Kroah-Hartman
2009-09-19 21:37 ` Greg Kroah-Hartman [this message]
2009-09-19 21:37 ` [PATCH 59/79] n_tty: honor opost flag for echoes Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 60/79] n_tty: move echoctl check and clean up logic Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 61/79] tty: handle VT specific compat ioctls in vt driver Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 62/79] tty: vt: use printk_once Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 63/79] tty: Power: fix suspend vt regression Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 64/79] TTY: fix typos Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 65/79] tty: riscom8, fix shutdown declaration Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 66/79] tty: riscom8, fix tty refcnt Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 67/79] tty: USB: serial/mct_u232, " Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 68/79] uartlite: support shared interrupt lines Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 69/79] tty: Char: mxser, add support for CP112UL Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 70/79] tty: Char: mxser, use THRE for ASPP_OQUEUE ioctl Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 71/79] usb-serial: change referencing of port and serial structures Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 72/79] usb-serial: put subroutines in logical order Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 73/79] usb-serial: change logic of serial lookups Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 74/79] usb-serial: acquire references when a new tty is installed Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 75/79] usb-serial: fix termios initialization logic Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 76/79] usb-serial: rename subroutines Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 77/79] usb-serial: add missing tests and debug lines Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 78/79] usb-serial: straighten out serial_open Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 79/79] USB serial: update the console driver Greg Kroah-Hartman
2009-09-30 10:09 ` [origin tree boot crash] Re: [GIT PATCH] TTY patches for 2.6.31-git Ingo Molnar
2009-09-30 10:17 ` Alan Cox
2009-10-01 8:21 ` Ingo Molnar
2009-10-01 10:36 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1253396244-7885-58-git-send-email-gregkh@suse.de \
--to=gregkh@suse.de \
--cc=alan@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.