From: Greg Kroah-Hartman <gregkh@suse.de>
To: linux-kernel@vger.kernel.org
Cc: Alan Cox <alan@linux.intel.com>, Greg Kroah-Hartman <gregkh@suse.de>
Subject: [PATCH 52/79] serial: replace the state mutex with the tty port mutex
Date: Sat, 19 Sep 2009 14:36:57 -0700 [thread overview]
Message-ID: <1253396244-7885-52-git-send-email-gregkh@suse.de> (raw)
In-Reply-To: <20090919213345.GB7668@kroah.com>
From: Alan Cox <alan@linux.intel.com>
They cover essentially the same stuff and we can therefore fold it into the
tty_port one.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/serial/pmac_zilog.c | 8 +-
drivers/serial/serial_core.c | 227 ++++++++++++++++++++++--------------------
include/linux/serial_core.h | 2 -
3 files changed, 123 insertions(+), 114 deletions(-)
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index ab4c85b..0dc7868 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -1645,7 +1645,7 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
state = pmz_uart_reg.state + uap->port.line;
mutex_lock(&pmz_irq_mutex);
- mutex_lock(&state->mutex);
+ mutex_lock(&state->port.mutex);
spin_lock_irqsave(&uap->port.lock, flags);
@@ -1676,7 +1676,7 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
/* Shut the chip down */
pmz_set_scc_power(uap, 0);
- mutex_unlock(&state->mutex);
+ mutex_unlock(&state->port.mutex);
mutex_unlock(&pmz_irq_mutex);
pmz_debug("suspend, switching complete\n");
@@ -1705,7 +1705,7 @@ static int pmz_resume(struct macio_dev *mdev)
state = pmz_uart_reg.state + uap->port.line;
mutex_lock(&pmz_irq_mutex);
- mutex_lock(&state->mutex);
+ mutex_lock(&state->port.mutex);
spin_lock_irqsave(&uap->port.lock, flags);
if (!ZS_IS_OPEN(uap) && !ZS_IS_CONS(uap)) {
@@ -1737,7 +1737,7 @@ static int pmz_resume(struct macio_dev *mdev)
}
bail:
- mutex_unlock(&state->mutex);
+ mutex_unlock(&state->port.mutex);
mutex_unlock(&pmz_irq_mutex);
/* Right now, we deal with delay by blocking here, I'll be
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 744dec9..9d42e57 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -633,35 +633,36 @@ static void uart_unthrottle(struct tty_struct *tty)
static int uart_get_info(struct uart_state *state,
struct serial_struct __user *retinfo)
{
- struct uart_port *port = state->uart_port;
+ struct uart_port *uport = state->uart_port;
+ struct tty_port *port = &state->port;
struct serial_struct tmp;
memset(&tmp, 0, sizeof(tmp));
/* Ensure the state we copy is consistent and no hardware changes
occur as we go */
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
- tmp.type = port->type;
- tmp.line = port->line;
- tmp.port = port->iobase;
+ tmp.type = uport->type;
+ tmp.line = uport->line;
+ tmp.port = uport->iobase;
if (HIGH_BITS_OFFSET)
- tmp.port_high = (long) port->iobase >> HIGH_BITS_OFFSET;
- tmp.irq = port->irq;
- tmp.flags = port->flags;
- tmp.xmit_fifo_size = port->fifosize;
- tmp.baud_base = port->uartclk / 16;
- tmp.close_delay = state->port.close_delay / 10;
- tmp.closing_wait = state->port.closing_wait == USF_CLOSING_WAIT_NONE ?
+ tmp.port_high = (long) uport->iobase >> HIGH_BITS_OFFSET;
+ tmp.irq = uport->irq;
+ tmp.flags = uport->flags;
+ tmp.xmit_fifo_size = uport->fifosize;
+ tmp.baud_base = uport->uartclk / 16;
+ tmp.close_delay = port->close_delay / 10;
+ tmp.closing_wait = port->closing_wait == USF_CLOSING_WAIT_NONE ?
ASYNC_CLOSING_WAIT_NONE :
- state->port.closing_wait / 10;
- tmp.custom_divisor = port->custom_divisor;
- tmp.hub6 = port->hub6;
- tmp.io_type = port->iotype;
- tmp.iomem_reg_shift = port->regshift;
- tmp.iomem_base = (void *)(unsigned long)port->mapbase;
+ port->closing_wait / 10;
+ tmp.custom_divisor = uport->custom_divisor;
+ tmp.hub6 = uport->hub6;
+ tmp.io_type = uport->iotype;
+ tmp.iomem_reg_shift = uport->regshift;
+ tmp.iomem_base = (void *)(unsigned long)uport->mapbase;
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
return -EFAULT;
@@ -699,7 +700,7 @@ static int uart_set_info(struct uart_state *state,
* module insertion/removal doesn't change anything
* under us.
*/
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
change_irq = !(uport->flags & UPF_FIXED_PORT)
&& new_serial.irq != uport->irq;
@@ -867,7 +868,7 @@ static int uart_set_info(struct uart_state *state,
} else
retval = uart_startup(state, 1);
exit:
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
return retval;
}
@@ -902,10 +903,11 @@ static int uart_get_lsr_info(struct uart_state *state,
static int uart_tiocmget(struct tty_struct *tty, struct file *file)
{
struct uart_state *state = tty->driver_data;
+ struct tty_port *port = &state->port;
struct uart_port *uport = state->uart_port;
int result = -EIO;
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
if ((!file || !tty_hung_up_p(file)) &&
!(tty->flags & (1 << TTY_IO_ERROR))) {
result = uport->mctrl;
@@ -914,7 +916,7 @@ static int uart_tiocmget(struct tty_struct *tty, struct file *file)
result |= uport->ops->get_mctrl(uport);
spin_unlock_irq(&uport->lock);
}
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
return result;
}
@@ -925,35 +927,38 @@ uart_tiocmset(struct tty_struct *tty, struct file *file,
{
struct uart_state *state = tty->driver_data;
struct uart_port *uport = state->uart_port;
+ struct tty_port *port = &state->port;
int ret = -EIO;
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
if ((!file || !tty_hung_up_p(file)) &&
!(tty->flags & (1 << TTY_IO_ERROR))) {
uart_update_mctrl(uport, set, clear);
ret = 0;
}
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
return ret;
}
static int uart_break_ctl(struct tty_struct *tty, int break_state)
{
struct uart_state *state = tty->driver_data;
+ struct tty_port *port = &state->port;
struct uart_port *uport = state->uart_port;
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
if (uport->type != PORT_UNKNOWN)
uport->ops->break_ctl(uport, break_state);
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
return 0;
}
static int uart_do_autoconfig(struct uart_state *state)
{
struct uart_port *uport = state->uart_port;
+ struct tty_port *port = &state->port;
int flags, ret;
if (!capable(CAP_SYS_ADMIN))
@@ -964,7 +969,7 @@ static int uart_do_autoconfig(struct uart_state *state)
* changing, and hence any extra opens of the port while
* we're auto-configuring.
*/
- if (mutex_lock_interruptible(&state->mutex))
+ if (mutex_lock_interruptible(&port->mutex))
return -ERESTARTSYS;
ret = -EBUSY;
@@ -990,7 +995,7 @@ static int uart_do_autoconfig(struct uart_state *state)
ret = uart_startup(state, 1);
}
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
return ret;
}
@@ -1093,6 +1098,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
unsigned long arg)
{
struct uart_state *state = tty->driver_data;
+ struct tty_port *port = &state->port;
void __user *uarg = (void __user *)arg;
int ret = -ENOIOCTLCMD;
@@ -1143,7 +1149,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
if (ret != -ENOIOCTLCMD)
goto out;
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
if (tty_hung_up_p(filp)) {
ret = -EIO;
@@ -1167,7 +1173,7 @@ uart_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd,
}
}
out_up:
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
out:
return ret;
}
@@ -1266,7 +1272,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
pr_debug("uart_close(%d) called\n", uport->line);
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
if (tty_hung_up_p(filp))
goto done;
@@ -1340,7 +1346,7 @@ static void uart_close(struct tty_struct *tty, struct file *filp)
wake_up_interruptible(&port->open_wait);
done:
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
}
static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
@@ -1416,7 +1422,7 @@ static void uart_hangup(struct tty_struct *tty)
BUG_ON(!kernel_locked());
pr_debug("uart_hangup(%d)\n", state->uart_port->line);
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
if (port->flags & ASYNC_NORMAL_ACTIVE) {
uart_flush_buffer(tty);
uart_shutdown(state);
@@ -1426,7 +1432,7 @@ static void uart_hangup(struct tty_struct *tty)
wake_up_interruptible(&port->open_wait);
wake_up_interruptible(&state->delta_msr_wait);
}
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
}
/*
@@ -1528,9 +1534,9 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
if (mctrl & TIOCM_CAR)
break;
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
schedule();
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
if (signal_pending(current))
break;
@@ -1553,15 +1559,17 @@ uart_block_til_ready(struct file *filp, struct uart_state *state)
static struct uart_state *uart_get(struct uart_driver *drv, int line)
{
struct uart_state *state;
+ struct tty_port *port;
int ret = 0;
state = drv->state + line;
- if (mutex_lock_interruptible(&state->mutex)) {
+ port = &state->port;
+ if (mutex_lock_interruptible(&port->mutex)) {
ret = -ERESTARTSYS;
goto err;
}
- state->port.count++;
+ port->count++;
if (!state->uart_port || state->uart_port->flags & UPF_DEAD) {
ret = -ENXIO;
goto err_unlock;
@@ -1569,8 +1577,8 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line)
return state;
err_unlock:
- state->port.count--;
- mutex_unlock(&state->mutex);
+ port->count--;
+ mutex_unlock(&port->mutex);
err:
return ERR_PTR(ret);
}
@@ -1636,7 +1644,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
if (tty_hung_up_p(filp)) {
retval = -EAGAIN;
port->count--;
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
goto fail;
}
@@ -1656,7 +1664,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
*/
if (retval == 0)
retval = uart_block_til_ready(filp, state);
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
/*
* If this is the first open to succeed, adjust things to suit.
@@ -1667,7 +1675,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp)
uart_update_termios(state);
}
- fail:
+fail:
return retval;
}
@@ -1689,57 +1697,58 @@ static const char *uart_type(struct uart_port *port)
static void uart_line_info(struct seq_file *m, struct uart_driver *drv, int i)
{
struct uart_state *state = drv->state + i;
+ struct tty_port *port = &state->port;
int pm_state;
- struct uart_port *port = state->uart_port;
+ struct uart_port *uport = state->uart_port;
char stat_buf[32];
unsigned int status;
int mmio;
- if (!port)
+ if (!uport)
return;
- mmio = port->iotype >= UPIO_MEM;
+ mmio = uport->iotype >= UPIO_MEM;
seq_printf(m, "%d: uart:%s %s%08llX irq:%d",
- port->line, uart_type(port),
+ uport->line, uart_type(uport),
mmio ? "mmio:0x" : "port:",
- mmio ? (unsigned long long)port->mapbase
- : (unsigned long long) port->iobase,
- port->irq);
+ mmio ? (unsigned long long)uport->mapbase
+ : (unsigned long long)uport->iobase,
+ uport->irq);
- if (port->type == PORT_UNKNOWN) {
+ if (uport->type == PORT_UNKNOWN) {
seq_putc(m, '\n');
return;
}
if (capable(CAP_SYS_ADMIN)) {
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
pm_state = state->pm_state;
if (pm_state)
uart_change_pm(state, 0);
- spin_lock_irq(&port->lock);
- status = port->ops->get_mctrl(port);
- spin_unlock_irq(&port->lock);
+ spin_lock_irq(&uport->lock);
+ status = uport->ops->get_mctrl(uport);
+ spin_unlock_irq(&uport->lock);
if (pm_state)
uart_change_pm(state, pm_state);
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
seq_printf(m, " tx:%d rx:%d",
- port->icount.tx, port->icount.rx);
- if (port->icount.frame)
+ uport->icount.tx, uport->icount.rx);
+ if (uport->icount.frame)
seq_printf(m, " fe:%d",
- port->icount.frame);
- if (port->icount.parity)
+ uport->icount.frame);
+ if (uport->icount.parity)
seq_printf(m, " pe:%d",
- port->icount.parity);
- if (port->icount.brk)
+ uport->icount.parity);
+ if (uport->icount.brk)
seq_printf(m, " brk:%d",
- port->icount.brk);
- if (port->icount.overrun)
+ uport->icount.brk);
+ if (uport->icount.overrun)
seq_printf(m, " oe:%d",
- port->icount.overrun);
+ uport->icount.overrun);
#define INFOBIT(bit, str) \
- if (port->mctrl & (bit)) \
+ if (uport->mctrl & (bit)) \
strncat(stat_buf, (str), sizeof(stat_buf) - \
strlen(stat_buf) - 2)
#define STATBIT(bit, str) \
@@ -1991,11 +2000,11 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
struct device *tty_dev;
struct uart_match match = {uport, drv};
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
if (!console_suspend_enabled && uart_console(uport)) {
/* we're going to avoid suspending serial console */
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
return 0;
}
@@ -2003,7 +2012,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
if (device_may_wakeup(tty_dev)) {
enable_irq_wake(uport->irq);
put_device(tty_dev);
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
return 0;
}
uport->suspended = 1;
@@ -2045,7 +2054,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
uart_change_pm(state, 3);
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
return 0;
}
@@ -2057,18 +2066,18 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
struct device *tty_dev;
struct uart_match match = {uport, drv};
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
if (!console_suspend_enabled && uart_console(uport)) {
/* no need to resume serial console, it wasn't suspended */
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
return 0;
}
tty_dev = device_find_child(uport->dev, &match, serial_match_port);
if (!uport->suspended && device_may_wakeup(tty_dev)) {
disable_irq_wake(uport->irq);
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
return 0;
}
uport->suspended = 0;
@@ -2124,7 +2133,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
clear_bit(ASYNCB_SUSPENDED, &port->flags);
}
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
return 0;
}
@@ -2364,12 +2373,11 @@ int uart_register_driver(struct uart_driver *drv)
*/
for (i = 0; i < drv->nr; i++) {
struct uart_state *state = drv->state + i;
+ struct tty_port *port = &state->port;
- mutex_init(&state->mutex);
-
- tty_port_init(&state->port);
- state->port.close_delay = 500; /* .5 seconds */
- state->port.closing_wait = 30000; /* 30 seconds */
+ tty_port_init(port);
+ port->close_delay = 500; /* .5 seconds */
+ port->closing_wait = 30000; /* 30 seconds */
init_waitqueue_head(&state->delta_msr_wait);
tasklet_init(&state->tlet, uart_tasklet_action,
(unsigned long)state);
@@ -2419,62 +2427,64 @@ struct tty_driver *uart_console_device(struct console *co, int *index)
* level uart drivers to expand uart_port, rather than having yet
* more levels of structures.
*/
-int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
+int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
{
struct uart_state *state;
+ struct tty_port *port;
int ret = 0;
struct device *tty_dev;
BUG_ON(in_interrupt());
- if (port->line >= drv->nr)
+ if (uport->line >= drv->nr)
return -EINVAL;
- state = drv->state + port->line;
+ state = drv->state + uport->line;
+ port = &state->port;
mutex_lock(&port_mutex);
- mutex_lock(&state->mutex);
+ mutex_lock(&port->mutex);
if (state->uart_port) {
ret = -EINVAL;
goto out;
}
- state->uart_port = port;
+ state->uart_port = uport;
state->pm_state = -1;
- port->cons = drv->cons;
- port->state = state;
+ uport->cons = drv->cons;
+ uport->state = state;
/*
* If this port is a console, then the spinlock is already
* initialised.
*/
- if (!(uart_console(port) && (port->cons->flags & CON_ENABLED))) {
- spin_lock_init(&port->lock);
- lockdep_set_class(&port->lock, &port_lock_key);
+ if (!(uart_console(uport) && (uport->cons->flags & CON_ENABLED))) {
+ spin_lock_init(&uport->lock);
+ lockdep_set_class(&uport->lock, &port_lock_key);
}
- uart_configure_port(drv, state, port);
+ uart_configure_port(drv, state, uport);
/*
* Register the port whether it's detected or not. This allows
* setserial to be used to alter this ports parameters.
*/
- tty_dev = tty_register_device(drv->tty_driver, port->line, port->dev);
+ tty_dev = tty_register_device(drv->tty_driver, uport->line, uport->dev);
if (likely(!IS_ERR(tty_dev))) {
device_init_wakeup(tty_dev, 1);
device_set_wakeup_enable(tty_dev, 0);
} else
printk(KERN_ERR "Cannot register tty device on line %d\n",
- port->line);
+ uport->line);
/*
* Ensure UPF_DEAD is not set.
*/
- port->flags &= ~UPF_DEAD;
+ uport->flags &= ~UPF_DEAD;
out:
- mutex_unlock(&state->mutex);
+ mutex_unlock(&port->mutex);
mutex_unlock(&port_mutex);
return ret;
@@ -2489,15 +2499,16 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *port)
* core driver. No further calls will be made to the low-level code
* for this port.
*/
-int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
+int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
{
- struct uart_state *state = drv->state + port->line;
+ struct uart_state *state = drv->state + uport->line;
+ struct tty_port *port = &state->port;
BUG_ON(in_interrupt());
- if (state->uart_port != port)
+ if (state->uart_port != uport)
printk(KERN_ALERT "Removing wrong port: %p != %p\n",
- state->uart_port, port);
+ state->uart_port, uport);
mutex_lock(&port_mutex);
@@ -2505,28 +2516,28 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *port)
* Mark the port "dead" - this prevents any opens from
* succeeding while we shut down the port.
*/
- mutex_lock(&state->mutex);
- port->flags |= UPF_DEAD;
- mutex_unlock(&state->mutex);
+ mutex_lock(&port->mutex);
+ uport->flags |= UPF_DEAD;
+ mutex_unlock(&port->mutex);
/*
* Remove the devices from the tty layer
*/
- tty_unregister_device(drv->tty_driver, port->line);
+ tty_unregister_device(drv->tty_driver, uport->line);
- if (state->port.tty)
- tty_vhangup(state->port.tty);
+ if (port->tty)
+ tty_vhangup(port->tty);
/*
* Free the port IO and memory resources, if any.
*/
- if (port->type != PORT_UNKNOWN)
- port->ops->release_port(port);
+ if (uport->type != PORT_UNKNOWN)
+ uport->ops->release_port(uport);
/*
* Indicate that there isn't a port here anymore.
*/
- port->type = PORT_UNKNOWN;
+ uport->type = PORT_UNKNOWN;
/*
* Kill the tasklet, and free resources.
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index f98dc78..27767ea 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -351,8 +351,6 @@ struct uart_state {
struct tasklet_struct tlet;
wait_queue_head_t delta_msr_wait;
struct uart_port *uart_port;
-
- struct mutex mutex;
};
#define UART_XMIT_SIZE PAGE_SIZE
--
1.6.4.2
next prev parent reply other threads:[~2009-09-19 21:42 UTC|newest]
Thread overview: 86+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-19 21:33 [GIT PATCH] TTY patches for 2.6.31-git Greg KH
2009-09-19 21:36 ` [PATCH 01/79] tty: gigaset: really fix chars_in_buffer Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 02/79] serial: bfin_5xx: fix building as module when early printk is enabled Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 03/79] tty: serial/pcmcia: add ID for Advantech card Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 04/79] tty-ldisc: make /proc/tty/ldiscs use ldisc_ops instead of ldiscs Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 05/79] tty-ldisc: get rid of tty_ldisc_try_get() helper function Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 06/79] tty: includecheck fix: drivers/char, vt.c Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 07/79] tty: icom: bit and/or confusion? Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 08/79] cyclades: add tty refcounting Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 09/79] cyclades: remove block_til_ready Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 10/79] cyclades: avoid addresses recomputation Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 11/79] cyclades: switch to tty_port_hangup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 12/79] cyclades: close cleanup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 13/79] cyclades: overall cleanup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 14/79] cyclades: sleep instead busy-wait Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 15/79] cyclades: use dtr_rts helpers Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 16/79] cyclades: merge cy_startup tails Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 17/79] cyclades: ioctls cleanup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 18/79] cyclades: tiocm cleanup Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 19/79] cyclades: introduce cyy_readb/writeb Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 20/79] cyclades: remove more duplicated code Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 21/79] slip: Clean up create and destroy Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 22/79] kfifo: Use "const" definitions Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 23/79] MOS7720 has no tiocmget method Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 24/79] tty: usb_serial_mos7720: Fix get_lsr_info Greg Kroah-Hartman
2010-01-26 11:08 ` Kees Schoenmakers
2010-01-26 11:09 ` Kees Schoenmakers
2009-09-19 21:36 ` [PATCH 25/79] tty: Fix a typo noted in passing Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 26/79] mos7840: remove old dead modem logic Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 27/79] serial: 8250: add IRQ trigger support Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 28/79] 8250: Now honours baud rate lower bounds Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 29/79] tty: Add a full port_close function Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 30/79] riscom8: split open and close methods up Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 31/79] mxser: Split close ready for a standard tty_port_close method Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 32/79] isicom: Split the close hardware bits out Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 33/79] tty: riscom8 kref and tty_port_close Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 34/79] cyclades: use the full port_close function Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 35/79] tty: make the kref destructor occur asynchronously Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 36/79] cdc_acm: Fix to use modern speed interfaces Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 37/79] tty: USB hangup is racy Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 38/79] tty: remove dtr/rts use from the driver open methods Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 39/79] tty: USB can now use the shutdown method for kref based freeing of ports Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 40/79] vt: add an event interface Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 41/79] vt: remove power stuff from kernel/power Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 42/79] vt: move kernel stuff out of vt.h Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 43/79] vt: add an activate and lock Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 44/79] tty: USB does not need the filp argument in the drivers Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 45/79] isicom: split the open method for the isicom device Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 46/79] serial: kill off uart_info Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 47/79] serial: Fold closing_* fields into the tty_port ones Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 48/79] serial: use tty_port pointers in the core code Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 49/79] serial: move count into the tty_port version Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 50/79] serial: move the flags into the tty_port field Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 51/79] serial: kill off uif_t Greg Kroah-Hartman
2009-09-19 21:36 ` Greg Kroah-Hartman [this message]
2009-09-19 21:36 ` [PATCH 53/79] serial: move delta_msr_wait into the tty_port Greg Kroah-Hartman
2009-09-19 21:36 ` [PATCH 54/79] serial: move port users helper Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 55/79] serial: kill USF_CLOSING_* definitions Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 56/79] serial: introduce tty krefs Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 57/79] Set proper console speed on resume if console suspend is disabled Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 58/79] tty: USB serial termios bits Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 59/79] n_tty: honor opost flag for echoes Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 60/79] n_tty: move echoctl check and clean up logic Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 61/79] tty: handle VT specific compat ioctls in vt driver Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 62/79] tty: vt: use printk_once Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 63/79] tty: Power: fix suspend vt regression Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 64/79] TTY: fix typos Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 65/79] tty: riscom8, fix shutdown declaration Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 66/79] tty: riscom8, fix tty refcnt Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 67/79] tty: USB: serial/mct_u232, " Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 68/79] uartlite: support shared interrupt lines Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 69/79] tty: Char: mxser, add support for CP112UL Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 70/79] tty: Char: mxser, use THRE for ASPP_OQUEUE ioctl Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 71/79] usb-serial: change referencing of port and serial structures Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 72/79] usb-serial: put subroutines in logical order Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 73/79] usb-serial: change logic of serial lookups Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 74/79] usb-serial: acquire references when a new tty is installed Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 75/79] usb-serial: fix termios initialization logic Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 76/79] usb-serial: rename subroutines Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 77/79] usb-serial: add missing tests and debug lines Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 78/79] usb-serial: straighten out serial_open Greg Kroah-Hartman
2009-09-19 21:37 ` [PATCH 79/79] USB serial: update the console driver Greg Kroah-Hartman
2009-09-30 10:09 ` [origin tree boot crash] Re: [GIT PATCH] TTY patches for 2.6.31-git Ingo Molnar
2009-09-30 10:17 ` Alan Cox
2009-10-01 8:21 ` Ingo Molnar
2009-10-01 10:36 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1253396244-7885-52-git-send-email-gregkh@suse.de \
--to=gregkh@suse.de \
--cc=alan@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.